A highly selective solid phase extraction sorbent for pre-concentration of sameridine made by molecular imprinting

Summary A novel approach to solid phase extraction, based on the use of a highly selective molecularly imprinted polymer, is presented. The versatility of this type of sorbent for solid phase extraction was demonstrated in a model batch-wise pre-concentration of sameridine prior to gas chromatography. Problems associated with leakage of remaining imprint molecules during the desorption phase could be eliminated by the use of a close structural analogue of sameridine as the imprint species. It was found that a major benefit of the imprinted polymer was its specificity, which lead to distinctly cleaner chromatographic traces and ability to improve sensitivity by extracting sameridine from larger sample volumes.     

Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

High performance liquid chromatographic separation of polar and non-polar chlorophyll pigments from algae using a wide pore polymeric octadecylsilica column

A method employing a wide pore polymeric reversed phase column has been developed for the separation of most of the chlorophylls and related compounds previously described as occurring in marine microalgae. The high selectivity toward molecular shape of this kind of stationary phase has enabled compounds of very similar structure, such as chlorophylls c₁, c₂ and Mg-divinylpheoporphyrin a₅ monomethyl ester, and chlorophyll a and the phytol-substituted chlorophyll c-like pigments, which commonly coelute on monomeric bonded phases, to be resolved in a single run. Some of these pigments, formerly thought to be a single compound, have, in fact, been demonstrated to be groups of two or more. The method has been successfully applied to both algal cultures and natural sea water samples. When visible light absorbance detection was used, the method proved suitable for separation of various carotenoids.     

Topological Simplicity of a Certain LF-Algebra

We show that the LF-algebra considered by Akkar and Nacir in [1] is topologically simple.     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

关于多线性振荡奇异积分在加权Hardy-型空间上的一致估计

本文对一类具有光滑位相函数的多线性振荡奇异积分算子建立了一致的加权（H^1(R^n),L^1(R^n))估计及一致的加权（HKp(R^n),Kp(R^n)估计。     

Fourth-order problems with fully nonlinear boundary conditions

Differential inequality method, bounding function method and topological degree are applied to obtain the existence criterions of at least one solution for the general fourth-order differential equations under nonlinear boundary conditions, and many existing results are complemented.     

Optical properties of polarization-dependent geometric phase elements with partially polarized light

The behavior of geometric phase elements illuminated with partially polarized monochromatic beams is investigated both theoretically and experimentally. The element discussed in this paper is composed of wave plates with π-retardation and a space-variant orientation angle. We found that a beam emerging from such an element comprises two polarization orders; right-and left-handed circularly polarized states with conjugate geometric phase modification. This phase equals twice the orientation angle of the space-variant wave plate comprising the element. Apart from the two polarization orders, the emerging beam coherence polarization matrix includes a “vectorial interference matrix” which contains information concerning the correlation between the two orthogonal, circularly polarized portions of the incident beam. In this paper we measure this correlation by a simple interference experiment. In addition, we found that the equivalent mutual intensity of the emerging beam is modulated according to the geometric phase induced by the element. Other interesting phenomena concerning propagation will be discussed theoretically and demonstrated experimentally. The experiment made use of a spherical geometric phase element that was realized by use of a space-variant subwavelength grating illuminated with CO₂ laser radiation of 10.6 μm wavelength.     

Discontinuous travelling wave solutions for certain hyperbolic systems

In an earlier paper on a malignant cell invasion model (Marchantet al., SIAM J. Appl. Math, 60, 2000) we introduced a novelform of discontinuous travelling wave solution. These solutionscould be studied easily by combining behaviour within a phaseplane with the Rankine–Hugoniot shock conditions, whichdescribe properties (such as the ratio of the jump discontinuitiesto the speed of propagation) that solutions may possess. Theseresults were new for several reasons. The shock conditions relateto hyperbolic equations (which the model is) but were appliedin a travelling wave ordinary differential equation phase planeusing techniques that usually apply to parabolic reaction–diffusionsystems. In addition the solutions possess singular behaviournear several points in the phase plane but in spite of thisthere exists a robust and stable family of physically interestingsolutions. In this paper we discuss two previously studied models, oneof detonation theory and one of angiogenesis. We show that eachof these models also possesses a family of discontinuous travellingwave solutions which was not previously discovered. Of particularinterest is the solution which has a blunt interface at thefront of the invading profile. In all three models it is thissolution that is seen to stably evolve from physically relevantinitial data, and for physically relevant parameter values. This work confirms the robustness of these novel travellingwave solutions and their applicability to a wider range of mathematicalmodelling situations.