A small-angle X-ray scattering study of nanoparticle assembly in an aligned nematic liquid crystal

The assembly of colloidal particles in a nematic liquid crystal has been investigated using small-angle X-ray scattering. The structure and orientation of nanoparticle assemblies in bulk samples of aligned nematic liquid crystal have been determined. The method offers some advantages over optical microscopy, which is usually restricted to investigations of thin cells and micron-sized particles. The scattering from chains of particles has been calculated, and comparison with experimental results has shown that suspensions of 48 and 105 nm diameter silica nanoparticles formed highly ordered structures perpendicular to the liquid crystal director, consistent with quadrupolar defect-induced assembly.     

多种类表面活性剂临界胶束浓度定量构效关系

表面活性剂的临界胶束浓度(CMC)是个非常重要的物质特性参数, CMC在研究表面活性剂的工业应用和生物利用方面发挥着关键作用. 本工作提出了一个新的拓扑指数—扩展距离矩阵, 建立了一个稳定的构效关系模型, 并对175种表面活性剂的临界胶束浓度进行了计算预测. 结果表明, 基于新的拓扑指数建立的构效关系模型计算临界胶束浓度能给出稳定可靠的预测结果, 其预测结果相关性系数R²(training set)=0.9295, 相对标准偏差ARD(training set)=8.20%, R²(testing set)=0.9257, ARD(testing set)=6.76%. 与文献中模型预测结果的对比表明, 本工作在稳定性和可靠性上均有显著改善.     

Interface structure and misfit relaxation in YBa2Cu3O7‐δ/PrBa2Cu3O7‐δ heterostructures on SrTiO3(001) substrates

Structural properties of YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterointerfaces have been investigated by aberration‐corrected electron microscopy. Experimental evidence shows that c‐axis‐oriented YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterostructures with atomically sharp interface epitaxially grow on SrTiO₃(001) substrates. In terms of the contrast analysis, no apparent interdiffusion between YBa₂Cu₃O_7‐δ and PrBa₂Cu₃O_7‐δ occurs at the interface. In addition, stand‐off misfit dislocations and planar faults appear within PrBa₂Cu₃O_7‐δ layer near the interface. Both misfit dislocations and interfacial dislocations resulting from the termination of planar faults contribute to misfit relaxation at the YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ interface. The defect configuration of planar faults and stand‐off misfit dislocations is explored. Copyright © 2013 John Wiley & Sons, Ltd.     

Compression testing of continuous fiber reinforced polymer composites with out-of-plane fiber waviness and circular notches

We investigated the face-stabilized Open-Hole Compression (OHC) test method for evaluating the effects of fiber waviness on the compression strength of continuous carbon fiber reinforced polymer composites. Temporal evaluations of the load-deformation response, acoustic emissions and optical microscopy are used to understand the failure modes and damage progression in the OHC specimen. The failure modes observed are structurally correlated to matrix failure and kink zone formation leading to fiber fracture. The results show how the resin pocket plays a more critical role than the layup in influencing the initiation of damage in the composite specimens.     

On the photon-drag effect of photocurrent of surface states of topological insulators

The photocurrent of surface states of topological insulator due to photon-drag effect is computed, being based on pure Dirac model of surface states. The scattering by disorder is taken into account to provide a relaxation mechanism for the photocurrent. The Keldysh–Schwinger formalism has been employed for the systematic calculation of photocurrent. The helicity dependent photocurrent of sizable magnitude transverse to the in-plane photon momentum is found, which is consistent with experimental data. Other helicity independent photocurrents with various polarization states are also calculated.     

双功能改性的T型分子筛膜用于有机溶剂脱水

将3-氨丙基三乙氧基硅烷（APTES）引入到T型分子筛膜表面,用以修饰多晶膜合成过程中产生的缺陷。X射线衍射、场发射扫描电子显微镜、X射线光电子能谱和FT-IR等方法的表征结果显示,APTES通过“键合”的形式被成功地修饰到膜表面上。APTES层起到2个作用：一是提高膜的亲水性;二是减少膜层的缺陷。将修饰后的膜应用在348 K、90%的异丙醇水溶液的脱水时,该膜表现出比较高的分离因子和通量。该方法重复性良好,5个修饰后的膜样品的选择性平均增加了大约8倍（从359±23增加到2 934±183）,而渗透通量仅仅从（3.52±0.10） kg·m^-2·h^-1降低到（3.06±0.14） kg·m^-2·h^-1（减少13.07%）。在363 K下,修饰的膜经过100 h的连续测试,膜渗透测得的水含量均可达到99.50%以上,表明修饰后的膜性能较稳定。     

Topological monodromy as an obstruction to Hamiltonization of nonholonomic systems: Pro or contra?

The phenomenon of a topological monodromy in integrable Hamiltonian and nonholonomic systems is discussed. An efficient method for computing and visualizing the monodromy is developed. The comparative analysis of the topological monodromy is given for the rolling ellipsoid of revolution problem in two cases, namely, on a smooth and on a rough plane. The first of these systems is Hamiltonian, the second is nonholonomic. We show that, from the viewpoint of monodromy, there is no difference between the two systems, and thus disprove the conjecture by Cushman and Duistermaat stating that the topological monodromy gives a topological obstruction for Hamiltonization of the rolling ellipsoid of revolution on a rough plane.     

Accelerated formation of the boron–oxygen complex in p‐type Czochralski silicon

This Letter reports on the acceleration of the rate of formation of the boron–oxygen defect in p‐type Czochralski silicon with illumination intensities in excess of 2.1 × 10¹⁷ photons/cm²/s. It is observed that increased light intensities greatly enhance the rate of defect formation, without increasing the saturation concentration of the defect. These results suggest a dependence of the defect formation rate upon the total majority carrier concentration. Finally, a method using temperatures up to 475 K and an illumination intensity of 1.68 × 10¹⁹ photons/cm²/s is shown to result in near‐complete defect formation within seconds. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)