基于蛇形光路的PET探测器作用深度提取方法

为实现正电子发射断层成像(Positron Emission Tomography,PET)探测器的作用深度(Depth Of Interaction,DOI)信息获取,本文提出一种基于分光技术的探测器设计方案.探测器采用晶体单元与硅光电倍增管(Silicon Photomultiplier,SiPM)一对一耦合、蛇形光路的设计和单端Anger加权读出方法进行DOI解码.基于GATE软件进行蒙特卡罗模拟,建立8×1的LSO晶体阵列(单根晶体尺寸3.1×3.1×20mm3);模拟泛场照射获取位置查找表;并进行不同深度的模拟,获得各晶体在各深度的空间分辨率.结果显示所模拟的探测器模块DOI分辨率在1.0~6.7mm之间,平均值为3.2mm.本文提出的基于蛇形光路的PET探测器方案能在维持系统成本和复杂度的前提下实现DOI解码,提升PET系统的成像性能.     

THREE-DIMENSIONAL NUMERICAL LOCALIZATION OF IMPERFECTIONS BASED ON A LIMIT MODEL IN ELECTRIC FIELD AND A LIMIT PERTURBATION MODEL

From a limit model in electric field obtained by letting the frequency vanish in the time-harmonic Maxwell equations, we consider a limit perturbation model in the tangential boundary trace of the curl of the electric field for localizing numerically certain small electromagnetic inhomogeneities, in a three-dimensional bounded domain. We introduce here two localization procedures resulting from the combination of this limit perturbation model with each of the following inversion processes： the Current Projection method and an Inverse Fourier method. Each localization procedure uses, as data, a finite number of boundary measurements, and is employed in the single inhomogeneity case; only the one based on an Inverse Fourier method is required in the multiple inhomogeneities case. Our localization approach is numerically suitable for the context of inhomogeneities that are not purely electric. We compare the numerical results obtained from the two localization procedures in the single inhomogeneity configuration, and describe, in various settings of multiple inhomogeneities, the results provided by the procedure based on an Inverse Fourier method.     

基于旋转扫描探头的OCT内窥成像系统设计*

为了同时获取样品的表面和深度信息,研究光学相干层析的成像原理,建立了基于光学相干层析技术的内窥系统,实现了旋转扫描成像,系统的工作波长为1 310 nm,工作带宽为80 nm.理论推导及计算机仿真得到了系统信噪比与干涉仪的分光比、反射率之间的关系并分析了理论分辨率和探测深度.提出外径为5 mm的内窥镜扫描探头,聚焦距离为12 mm,数值孔径NA为0.47,折射率分布常量A=0.218 7.利用微型电机驱动直角棱镜实现扫描,旋转速度为25 rpm,旋转一周得到640个采样点.采用多层盖玻片和洋葱表皮作为样品进行实验分析,得到了盖玻片和洋葱的图像,横向分辨率和纵向分辨率分别为10 μm和15 μm.结果表明,设计的光学相干层析内窥系统能够用于旋转扫描成像,获取更多的组织信息.     

Modified method of characteristics in transient radiation transfer

This paper presents the modified method of characteristics for simulating multidimensional transient radiative transfer in emitting, absorbing and scattering media. The method is based on the method of characteristics that follows photons along their pathlines. It makes use of a fixed set of points, and unlike the conventional method of characteristics, it follows the photons backward in space. Test problems involving diffuse irradiation in 1-D and 3-D participating media and collimated irradiation in 1-D participating media were considered. The results show good agreement with analytical and numerical solutions reported in literature. The scheme is fast and was able to capture the sharp discontinuities associated with the propagation of a radiation front in transient radiation transport.     

软X射线层析摄影在HL—1装置上的应用

本文描述我们建立的含有22道探测器阵列及数据采集和处理系统的软X射线层析摄影诊断,并成功地应用于HL-1托卡马克装置,获得了软X射线辐射的二维层析图的时间分辨,初步观察了等离子体MHD不稳定性发展变化的局部过程。     

辐射源旋转台阶成像技术

 提出了用旋转台阶对辐射源成像的方法。对台阶响应曲线微分可得到辐射源2维出射强度沿台阶方向的1个投影,通过旋转台阶体,可得到完整的正弦图,从而可用层析重建算法重建出辐射源区的强度分布。用钨合金台阶体在1个60Co源上进行成像实验,从400个角度的台阶响应数据重建出60Co源活性区图像,表明该方法是可行的。此方法可推广到大孔径圆孔台阶体,用于测量X射线焦点等小尺寸辐射源的尺寸。     

The synthesis of precursor of FP- (+) DTBZ

A synthetic route to the precursor of FP- (+) DTBZ was disclosed, in which 3-hydroxy-4-methoxybenzaldehyde was employed as a starting material. In the method, the benzyl-protecting protocol and the in-situ Diels-Alder reaction made the procedure more practical because of the mild conditions for selectively deprotection and the accelerated reaction process.     

托卡马克等离子体辐射诊断中的线积分辐射率

在托卡马克等离子体辐射诊断中,通过阿贝尔反汪或层析分析从线积分辐射率中得到的空间分布,是辐射率在束线宽度范围内的平均值的分布,束线宽度限制了诊断的空间分辨能力。当探测器无穷小的近似条件不成立时。束线宽度显著大于探测器中心对光栏孔径张角决定的宽度,并且在给定束线截面内各点辐射对探测信号的贡献差别可能变得重要从而导致辐射率的宽度平均成为带权重的平均。     

Three-dimensional dynamic characterization of square-nosed slugging phenomena in a fluidized bed

Slugging represents one of the major regimes in fluidization, which occurs in small diameter beds with large bed height-to-diameter ratio or in large diameter beds with internals that resemble multiple small diameter fluidized beds. Slug types include round-nosed slug, wall slug and square-nosed slug. Studies of the slugs have been mainly focused on round-nosed or wall slugs known as half slug, typically occurring in Geldart group A particle fluidization. The square-nosed slug typically occurring for Geldart group D particles appears to be regarded as simple in its structure. The Electrical Capacitance Volume Tomography (ECVT) imaging of the square-nosed slugging phenomena conducted in this study reveals otherwise. That is the structure of the square-nosed slug is, in fact, complex, particularly with respect to its dynamic variation in fluidization. More broadly, this study examines experimentally the hydrodynamic characteristics of the square-nosed fluidization regime. Specifically, simultaneous measurements from multiple ECVT sensors provide non-invasive, continuous, 3-dimensional imaging of the entire flow region of the slugging bed and hence enabling the dynamic characterization of the evolution of the slugs. The analysis of the 3D images reconstructed for real-time gas–solid volume fraction profile of the slugging fluidized bed indicates that there are three different zones, namely, the bottom fluidization zone, the gas slug zone, and the solid slug zone, co-existing in the bed. The three zones present different hydrodynamic characteristics during the slug evolution. It is found that varying the gas velocity of the slugging bed mainly varies the maximum length of the gas slug zone, while it only has a minor effect on the lengths of the bottom fluidization zone and solid slug zone. It also has an insignificant effect on the solid volume fraction of the three zones.