500—4250eV电子对CO2的散射全截面绝对测量

对中能电子与二氧化碳分子碰撞的散射全截面测量，给出５００－４２５０ｅＶ电子对ＣＯ２的绝对散射全截面。对测量结果作了曲线拟合，并与已有的实验和理论结果进行了比较     

Analysis of the generation mechanism of the S-shaped J—V curves of MoS2/Si-based solar cells

Amorphous-microcrystalline MoS$_{2}$ thin films are fabricated using the sol-gel method to produce MoS$_{2}$/Si-based solar cells. The generation mechanisms of the S-shaped current density-voltage ($J$-$V$) curves of the solar cells are analyzed. To improve the performance of the solar cells and address the problem of the S-shaped $J$-$V$ curve, a MoS$_{2}$ film and a p$^+$ layer are introduced into the front and back interfaces of the solar cell, respectively, which leads to the formation of a p-n junction between the p-Si and the MoS$_{2}$ film as well as ohmic contacts between the MoS$_{2}$ film and the ITO, improving the S-shaped $J$-$V$ curve. As a result of the high doping characteristics and the high work function of the p$^+$ layer, a high-low junction is formed between the p$^+$ and p layers along with ohmic contacts between the p$^+$ layer and the Ag electrode. Consequently, the S-shaped $J$-$V$ curve is eliminated, and a significantly higher current density is achieved at a high voltage. The device exhibits ideal p-n junction rectification characteristics and achieves a high power-conversion efficiency (CE) of 7.55%. The findings of this study may improve the application of MoS$_{2}$ thin films in silicon-based solar cells, which are expected to be widely used in various silicon-based electronic and optical devices.     

彩色负片印片颗粒指数的准确测定

分析了彩色负片印片颗粒指数σper实际测试中不同性能负片的测试特点和影响因素。印片颗粒指数的测试点应根据彩色负片的感光特性确定,为正常扩印时对应正片0．74中灰密度的负片密度点。影响印片颗粒指数值的两个主要因素是彩色相纸的反差修正系数α和彩色负片的覆盖力系数ECP;建立了α和ECP的实验求取方法,并通过对几种负片参量的实际测定,分析和说明了参量变化对印片颗粒指数数值的影响程度和应进行的修正。     

B原子的掺杂对富勒烯C32的电子传输特性与负微分电阻效应的影响

采用基于密度泛涵理论的第一性原理和非平衡格林函数方法研究了硼原子的掺杂对于富勒稀C32分子的电子传输特性与负微分电阻效应的影响．结果显示硼原子的掺杂明显改变了C32分子的电子传输特性和负微分电阻效应．同时研究了掺杂的硼原子的个数多少对C32分子的影响．     

普朗克常量测定系统中实验数据的采集和处理

介绍了在光电效应实验系统改造中,关于实验数据的采集和处理方法。     

采用(meta)-GGA泛函对Ag(111)、Rh(111)和Ir(111)上乙烯吸附的理论研究

本文针对在多种催化反应的重要中间体乙烯,使用(meta)-GGA等级的包含PBE,BEEF-vdW,SCAN以及SCAN+rVV10在内的多种交换关联泛函,系统研究了在过渡金属表面(Ag,Rh和Ir)上乙烯吸附势能面对泛函的依赖关系. 研究发现,对于乙烯在贵金属Ag(111)上的吸附,除了PBE外,BEEF-vdW,SCAN以及SCAN+rVV10均能预测出物理吸附态的存在. 对于乙烯在Rh(111)面的吸附,SCAN和SCAN+rVV10预测在化学吸附位之前存在有物理吸附前驱态,而基于PBE和BEEF-vdW的势能面并没有发现前驱态的存在. 而对于乙烯在Ir(111)上的吸附,BEEF-vdW也能微弱地预测出化学吸附前驱态的存在. 研究结果表明,无论在哪一种金属表面上,四种泛函中SCAN+rVV10给出的吸附能最强,其次是SCAN,最后是PBE或者BEEF-vdW.     

Assessment and distinction of commercial soy protein isolate product functionalities using viscosity characteristic curves

To simplify the assessment method of soy protein isolate（SPI） functionalities,the viscosity and functionalities of commercial SPI products were studied.Viscosity value（y） increases with increasing concentration（x） and exhibits a highly significant correlation with the exponential equation y = a·e^bx.The b values of products are gradually enhanced from dispersion,emulsion and injected to gel type.Products with low b values（<0.2）,and high dispersivity were dispersion-type.Products having high b values （>0.4） and gel springiness were gel-type.The other products with centered b value（0.2-0.4）,high solubility and emulsifying capacity were emulsion-type.     

平板折叠桌的设计模型

根据折叠桌的运动特征,选取折叠桌的四分之一为研究对象,建立任意角度下桌脚点的运动变化模型。考虑到产品稳固性、加工便利性和节约用材三方面对加工参数的影响,对折叠桌进行受力分析,得到多目标组合优化模型,用以确定出折叠桌的最优设计参数。针对用户提出的桌面形状要求,建立桌脚曲线的参数方程。作为模型推广,以椭圆状折叠桌为例,运用Matlab画出了桌脚边缘线在折叠过程中的动态变化示意图。同时,又深入研究Robert van Embricqs的滑动折叠桌,建立了新的桌脚曲线参数方程。最后,运用Matlab对多种形状折叠桌进行仿真,编写多目标优化算法,得出了最优加工参数,并进行了算法描述。     

Determination of phenolic compounds and authentication of PDO Lambrusco wines by HPLC-DAD and chemometric techniques

This work proposes a fast and simple method for detection and quantification of phenolic compounds in PDO Lambrusco wines using HPLC-DAD and chemometric techniques. Samples belonging to three different varieties of Lambrusco (Grasparossa, Salamino and Sorbara) were analyzed to provide a methodology appropriate for routine analysis. Given the high complexity of the sample and the coelution among chromatographic peaks, the use of chemometric techniques to extract the information of the individual eluting compounds was needed. Multivariate curve resolution-alternating least squares (MCR-ALS) allowed the resolution of the chromatographic peaks obtained and the use of this information for the quantification of the phenolic analytes in the presence of interferences. Use of multiset analysis and local rank/selectivity information was proven to be crucial for the correct resolution and quantification of compounds. The quantitative data provided by MCR-ALS about the phenolic targets and additional compounds present in the samples analyzed provided wine composition profiles, which were afterwards used to distinguish among wine varieties. Principal component analysis applied to the wine profiles allowed characterizing the wines according to their varieties.