FLTD三电极场畸变气体开关寿命特性

针对设计的一种场畸变气体开关,研究中间电极材料分别为不锈钢和黄铜条件下的烧蚀特性,结合开关寿命期间静态与触发特性的变化规律,获得决定开关寿命的关键因素,为三电极场畸变气体开关的性能优化提供理论支撑。研究结果表明,采用不锈钢和黄铜作为中间电极的烧蚀区域以及表面粗糙度均随着放电次数增加而增大,黄铜电极烧蚀较为严重且表面有明显的烧蚀圆斑,不锈钢电极则具有更高的表面粗糙度,阴阳极表面烧蚀存在明显差异,随着放电次数的增加,击穿点向电极边缘区域集中,影响开关的沿面绝缘特性,是导致开关寿命终结的主要原因。     

A Lattice Hydrodynamic Model for Traffic Flow Accounting for Driver Anticipation Effect of the Next-Nearest-Neighbor Site

In this paper, a new lattice hydrodynamic model is proposed by incorporating the driver anticipation effect of next-nearest-neighbor site. The linear stability analysis and nonlinear analysis show that the driver anticipation effect of next-nearest-neighbor site can enlarge the stable area of traffic flow. The space can be divided into three regions: stable, metastable, and unstable. Numerical simulation further illuminates that the driver anticipation effect of the next-nearest-neighbor site can stabilize traffic flow in our modified lattice model, which is consistent with the analytical results.     

The spreading behaviour of perfluoropolyether droplets on solid surfaces

The spread of perfluoropolyether （PFPE） droplets on solid surfaces has been measured from the top-down view through a microscope system. Effects of substrates, molecular weight and end-group functionality on spreading of the PFPE droplets have been studied experimentally and the results were compared with those by molecular dynamics （MD） simulations. Silicon wafer and diamond-like carbon （DLC） substrates were used to study the effect of substrates on spreading. Two types of PFPE, Z-dol and Z-tetraol, with the same chain structure and various molecular weights （2000 and 4000 g/mol） were employed in experiments. Effect of molecular weight has been investigated through comparing the spreading of Z-dol 2000 and Z-dol 4000, and it is found that the increase of molecular weight will decrease the mobility of PFPE. Comparison between spreading of Z-dol and Z-tetraol of the same molecular weight proved that functional end group plays a significant role on the spreading of PFPE, which confirmed the MD simulation results.     

压力对热声驱动脉管制冷机性能的影响

讨论了充气压力对热声压缩机的起振温度等性能的影响 ,着重研究了工作压力对热声驱动脉管制冷机性能的影响。对自行研制的驻波型热声驱动脉管制冷机进行了改进和优化 ,在最近的实验中取得了 1 2 0 K的无负荷最低制冷温度 ,达到液化天然气温区。     

诱导空间非相干束匀滑技术的近区特性及改善技术

诱导空间非相干技术是面向激光驱动惯性约束核聚变的一种具有自身独特优势的束匀滑方法.然而直接使用诱导空间非相干方法将引起强烈的近区强度空间调制,这将威胁装置的运行安全,并严重限制装置的最大输出能力.这也是该方法应用于聚变级高功率激光装置的主要技术障碍之一.本文介绍了一种通过双透镜滤波系统对诱导空间非相干束匀滑技术导致的近区空间强度调制进行匀滑的技术.利用该技术可以在保留诱导空间非相干束匀滑方法的先天优势(更好的远区匀滑特性)的前提下,获得均匀、稳定的近区强度分布,从而避免高功率激光系统在使用诱导空间非相干束匀滑技术时,因为近区强度不均匀、不稳定导致的器件损伤及输出能力受限.在理论建模和数值分析的基础上,以近区调制度、软化因子和透过率为主要评价指标,对比分析了方形、圆形、高斯型等3种滤波孔在不同尺寸下的近区输出效果,最终给出了一种典型的优化结果:16×16诱导空间非相干分割数、0.8倍衍射极限宽度、方形小孔.此时近区强度分布均匀,同时保证了较好的远区匀滑效果和高的能量利用率.在此基础上,针对装置的实际应用情况,进一步分析了准直误差对近区强度分布的影响,结果表明准直误差小于0.1倍衍射极限便不会影响输出的近区质量.对诱导空间非相干束匀滑方法所得焦斑的模拟分析表明,滤波系统的加入能进一步改善焦斑的低频不均匀性.     

遥感器CCD驱动器热设计及其在摄像过程中的温度变化

CCD驱动器是航天成像遥感器摄像过程中的主要热源之一。防止CCD驱动器过热是保证其正常工作的重要方面。介绍了遥感器的工作模式和对CCD驱动器采取的热控制措施。通过热平衡试验,利用回归的方法,对CCD驱动器在摄像过程中的温度变化规律进行了分析,同时对热控制效果进行了评估。CCD驱动器工作时升温速率在0.85℃/min左右,整个摄像过程中最高温度约为26℃,所实施的热控制措施效果理想。     

X波段长脉冲高功率微波产生的实验研究

 获得长脉冲高功率微波（HPM）输出是HPM源技术追求的重要目标之一。从物理机理上分析了影响慢波结构HPM器件实现长脉冲HPM输出的因素,并利用长脉冲脉冲功率源和过模慢波结构HPM器件,开展了X波段长脉冲HPM产生实验。实验中,采用介质-铜阴极,并在慢波结构表面镀Cr,在导引磁场约0.7 T、二极管电压约400 kV、电流约10 kA、束流脉宽200 ns的条件下,获得了功率500 MW、脉宽约100 ns、主模为TM₀₁的X波段长脉冲HPM输出。对实验结果的分析表明,脉冲功率源与HPM器件的阻抗不匹配,是导致HPM器件输出微波脉宽比电子束脉宽短、以及HPM器件输出微波功率效率较低的主要原因。     

Phase calculation with a swept source in optical coherence tomography: Jitter influence

An analysis of phase modifications introduced by laser jitter in frequency-domain optical coherence tomography (OCT) is described. It is shown that a 1D spurious phase function is introduced as a consequence of this phenomenon. This phase function is added to any other introduced by the object under analysis causing a superposition of both. The result may impose some limitations for unambiguous determination of phase changes of objects. Experimental and theoretical results are presented.     

环形电极单间隙电晕放电伏安特性

基于用于直线变压器型驱动源的多间隙气体开关结构,提出一种环形放电间隙与电晕针并联的气体火花间隙。通过测量间隙耐压过程中电晕放电的伏安特性,研究了气体介质、气压、电晕极性、电晕针长度以及针尖对应电极结构等因素对伏安特性的影响。结果表明:以空气为绝缘气体,负极性电晕可获得较稳定的伏安特性;改变电晕针长度和针尖对应电极结构可方便地实现对电晕放电伏安特性的调节以满足开关要求。     

Preliminary studies on a variable energy positron annihilation lifetime spectroscopy system

There are many advantages in being able to perform positron annihilation lifetime spectroscopy (PALS) using a variable energy positron beam, the most obvious being the easy identification of different defect types at different depths. The difficulty in conducting variable energy (VE) PALS studies lies in the fact that a “start” signal is required to signal the entry of the positron into the target. Two methods have been used to overcome this problem, namely the bunching technique, which employs radio frequency (RF) cavities and choppers, and secondly the use of secondary electrons emitted from the target. The latter technique is in terms of experimental complexity much simpler, but has in the past suffered from poor time resolution (typically ∼500 ps). In this work, we present a series of computer simulations of a design based on the secondary electron emission from thin C-foils in transmission mode which shows that significant improvements in time resolution can be made with resolutions ∼200 ps being in principle possible.