Capillary electrophoresis coupled to time of flight-mass spectrometry of therapeutic peptide hormones

We have established a method for separation and characterization of a series of peptide hormones of pharmaceutical interest and wide therapeutical use by capillary electrophoresis-electrospray-mass spectrometry (CE-ES-MS) using a sheath flow interface. Several parameters were systematically investigated, such as concentration of the electrolyte, organic solvent and sheath liquid composition, gas flow rates and capillary position. Moreover, limits of detection, linearity, repeatability and day-to-day reproducibility of the proposed method were studied in order to obtain the main quality parameters.     

Cyclodextrins as chiral stationary phases in capillary gas chromatography. Part VII: Cyclodextrins with an inverse substitution pattern – synthesis and enantioselectivity

Transferring the site of specific substitution of dipentylated cyclodextrins with methyl or acyl residues from the secondary 3-hydroxyl group to the primary 6-hydroxyl group was expected to provide new information on the mechanism of chiral recognition. The 3-position points towards and the 6-position points away from the cyclodextrin cavity which via inclusion complex formation is supposed to play a major role in chiral separation. The “inverse” 6-O-acyl-2,3-di-O-pentyl-cyclodextrins displayed almost no enantioselectivity but the corresponding 6-O-methyl derivatives are a versatile supplement to the chiral capillary GC phases nowadays available. Among the compounds that could be enantiomerically resolved are alcohols, amino acids, alkyl halides, bicyclic ethers, acetals, olefins, other hydrocarbons and chiral pharmaceuticals.     

Time shift correction in second-order liquid chromatographic data with iterative target transformation factor analysis

When the generalized rank annihilation method (GRAM) is applied to liquid chromatographic data with diode-array detection, an important problem is the time shift of the peak of the analyte in the test sample. This problem leads to erroneous predictions. This time shift can be corrected if a time window is selected so that the chromatographic profile of the analyte in the test sample is trilinear with the peak of the analyte in the calibration sample. In this paper we present a new method to determine when this condition is met. This method is based on the curve resolution with iterative target transformation factor analysis (ITTFA). The calibration and test matrices are independently decomposed into profiles and spectra, and aligned before GRAM is applied. Here we study two situations: first, when the calibration matrix has one analyte and second, when it has two analytes. When the calibration matrix has two analytes, we selectively determine the time window for the analyte to be quantified. There were considerably fewer prediction errors after correction.     

Dissipative structures formed in the course of drying the colloidal crystals of silica spheres on a cover glass

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the deionized aqueous colloidal crystal suspensions of silica spheres (diameter: 103 nm) on a cover glass have been observed. Spoke-like and ring-like patterns are formed in the macroscopic scale; the former is the crack in the sphere film and the latter is the hill accumulated with spheres formed around the outside edge. The neighbored inter-spoke angle, thickness of the film, and other morphological parameters have been discussed as a function of sphere concentration, concentration of sodium chloride, and the inclined angle of the cover glass. Fractal patterns of the mud cracks are observed in the microscopic scale. Capillary forces between spheres at the air-liquid surface and the relative rates between the water flow at the drying front and the convection flow of spheres are important for the pattern formation. Electronic Publication     

钒氧阴离子团簇与小分子碳氢化合物反应的实验和理论研究

为了在分子层次上揭示相关催化反应的机理, 人们对过渡金属氧化物团簇与碳氢化合物分子反应进行了大量研究. 相比于过渡金属氧化物团簇阳离子, 阴离子对一些碳氢化合物的活性弱得多, 因此研究还很少. 在本工作中, 我们通过激光溅射产生钒氧团簇阴离子VxOy, 产生的团簇在接近热碰撞条件下与烷烃(C2H6和C4H10)以及烯烃(C2H4和C3H6) 在一个快速流动反应管中进行反应, 飞行时间质谱用来检测反应前后的团簇分布. 在VxOy与烷烃的反应中, 生成了产物V2O6H-和V4O11H-; 在与烯烃的反应中, 产生了相应的吸附产物V4O11X-(X=C2H4或C3H6). 密度泛函理论计算表明: V2O-6和V4O-11可以活化烷烃(C2H6和C4H10)的C—H键, 也可以与烯烃(C2H4和C3H6)发生3+2环化加成反应形成一个五元环结构(-V-O-C-C-O-), C—H键活化与环加成反应都需经历可以克服的反应能垒. 理论计算与实验观测结果相符合. V2O-6和V4O-11团簇都具有氧原子自由基(O·或O-)的成键特征, 活性O-物种也经常出现在钒氧催化剂表面, 因而本研究在分子水平上, 揭示了表面活性氧物种与碳氢化合物反应的机理.     

X-ray, Raman and FTIRS studies of the microstructural evolution of zirconia particles caused by the thermal treatment

Genesis of the structure of zirconia particles prepared by precipitation of amorphous hydrated zirconia by ammonia from the ZrO(NO₃)₂ solution followed by a mild hydrothermal treatment (HTT) of precipitate, washing and calcination under air up to 1000 °C has been studied by X-ray diffraction (XRD), Raman and FTIRS. As revealed by FTIRS of lattice modes, the local structure of amorphous zirconia subjected to HTT is close to that in m-ZrO₂. This helps to obtain nearly single-phase monoclinic nanozirconia (particle size 5-15 nm) already after a mild calcination at 500 °C. Stability of this phase with nanoparticles sizes below the critical value determined by thermodynamic constraints is due to its excessive hydroxylation demonstrated by FTIRS. Dehydroxilation and sintering of these nanoparticles at higher (600-650 °C) temperatures of calcination leads to reappearance of the (111) “cubic” reflection in XRD patterns. Modeling of XRD patterns revealed that this phenomenon could be explained by polysynthetic (001) twinning earlier observed by HRTEM.     

Drying dissipative structures of the aqueous suspensions of monodisperse bentonite particles

Macroscopic and microscopic dissipative structural patterns formed in the course of drying the fractionated and monodisperse bentonite particles (plate-like in their shape) in aqueous deionized suspension and in the presence of NaCl have been studied on a cover glass. The patterns coexisted with the broad ring of the hill accumulated with the particles and with the round hills are formed around the outside edges of the film and in the center, respectively, in the macroscopic scale. By the addition of NaCl the pattern shifts from the broad ring to the round hill in the center. The spoke-like cracks, which have been observed for the suspensions of the spherical particles so often hitherto, are not observed at all for the bentonite suspensions. The characteristic convection flow of the particles and the interactions among the particles and substrate are important for the macroscopic pattern formation. Wrinkled, branch-like and/or star-like fractal patterns are observed in the microscopic scale. These patterns are determined mainly by the electrostatic and polar interactions between the particles and/or between the particle and the substrate in the course of drying.     

Temperature Dependent Dielectric Relaxation in Solvent Mixtures at Microwave Frequencies

By the use of time domain reflectometry method, dielectric measurements were carried out on dimethylformamide‐2‐nitrotoluene solvent mixtures in the frequency range 10 MHz‐20 GHz, at various temperatures from 15 °C to 45 °C. These solvent mixtures as well as pure solvents display a Debye type dispersion. Their frequency dependent dielectric properties can be summarized by the three parameters in the Debye equation: a static permittivity, permittivity at high frequency and a dielectric relaxation time constant. The free energy of activation for dipolar relaxation process and the Kirkwood correlation factor were determined using these fitting parameters for these solvent mixtures at various concentrations and temperatures. By using these dielectric parameters, the excess permittivity and excess inverse relaxation time is obtained. The excess permittivity is found to be positive for all concentrations and temperatures whereas the excess inverse relaxation time is negative.     

SYNTHESIS AND CHARACTERIZATION OF A NOVEL BLUE LIGHT EMITTING ROD-COIL DIBLOCK OLIGOMER

Four new rod-coil diblock molecules, which had well-defined para-phenylene oligomers (PPP, from biphenyl toquinquephenyl) as rigid segments and poly(ethylene oxide) (PEO, M_w ca. 750) as flexible segments, were synhesized. Thechemical structure and the number of repeating unit in PEO coil and PPP rod were characterized by ~1H-NMR and MALDI-TOF mass spectromeny. The diblock oligomers showed good solubility in common organic solvents and aggregated in wateras characterized by a blue shift in UV-vis absorption spectra, a red shift in emission spectra, quenching of the fluorescenceand formation of the microfibrilla and fractal-like structures. The formation of different supramolecular structures meant thatthis effort might lead to commercial important highly organized functional materials.     

Simultaneous determination of acidic,basic and alcoholic substances relating to monoamine hormones and metabolites in biological material by mass fragmentography (GC/MF)

A method is described for the simultaneous quantitative determination of monoamines and related compounds from urine and brain tissue samples in the pg-range, using a GC/MF instrument LKB-2091 provided with a multiple ion detection (MID) system and capillary columns. The simultaneous detection of “fingerprints” with fourteen and more compounds during one single GC run was achieved after the intoduction of “time gates” for the detection of the different characteristic masses. Several modifications to the LKB equipment permitted exact reproducibility of retention times, which is essential for the use of “time gates”. The detection of “fingerprints” with these acidic, basic and alcoholic substances was achieved by the extraction of the dried biological samples with silylating agents.