MoO_3、NiO、ZnO在小表面金红石上的分散行为

氧化物、盐类在氧化物载体表面的自发分散是一种广泛存在的现象，文献中已报导过大量氧化物和盐类在高比表面载体上分散的研究结果［'－3］TIO。作为一种较新型的载体，与Y－AI。O。、硅胶等传统载体相比，有许多不同特性．活性组分在TIO。表面的分散状态及所得催化剂的性能已有不少报导［'－'］，但所用的TIOZ主要是较高比表面的锐钛矿型TIOZ（刘金红石型TIO。（r）和锐钛矿型TIOZ（a）的结构不同，它是高温生成相，比表面较小［'］．氧化物在金红石上的分散行为仍未见报导．我们制备了三种具有不同比表面的TIO水），系统地研…     

后处理对TiO_2纳米薄膜的表面结构和光催化活性的影响

半导体TiO2光催化材料对环境中各种污染物的明显去除效果已引起人们的广泛关注犤1～6犦。在普通钠钙玻璃表面涂制高光催化活性的TiO2纳米薄膜,制成环保建筑材料,不仅可以自洁玻璃表面,而且可以用于净化空气、处理废水等。但由于在热处理过程中玻璃基体内的Na+离子扩散到薄膜表面,形成光生电子和空穴的复合中心,使TiO2纳米薄膜的光催化活性大大降低犤7～10犦。为了减少玻璃中Na+离子对TiO2薄膜光催化活性的有害影响,Paz等犤8犦研究了将钠钙玻璃浸入酸溶液中,使玻璃表面的钠离子被酸中的氢离子置换出来;在玻璃表面形成SiO2凝胶层,以便阻…     

An Unexpected Fluctuating Reactivity for Odd and Even Carbon Numbers in the TiO2‐Based Photocatalytic Decarboxylation of C2‐C6 Dicarboxylic Acids

The degradation behaviours of five straight‐chain dicarboxylic acids (from ethanedioic acid to hexanedioic acid) were compared in aqueous TiO₂‐based photocatalysis. When all other conditions were identical, the degradation rates were found to fluctuate regularly with the parity of the number of carbon atoms. Dicarboxylic acids with an even number of carbon atoms (e‐DAs) always degraded more slowly than those acids with an odd number of carbon atoms (o‐DAs). This unusual fluctuation in the reactivity for the degradation of dicarboxylic acids by TiO₂‐based photocatalysis is very closely related to the different pre‐coordination modes of the acids with the photocatalyst. Attenuated total reflection FTIR (ATR‐FTIR) of e‐DAs labelled with ¹³C showed that both carboxyl groups of the acid coordinate to TiO₂ through bidentate chelating forms. In contrast, only one carboxyl group of the o‐DAs coordinated to TiO₂ in a bidentate chelating manner, whereas the other formed a monodentate binding linkage. The bidentate chelating form with bilateral symmetric coordination did not favour degradation. Isotope‐labelling experiments were performed with ¹⁸O₂ to observe the different ways in which incorporated oxygen entered the initial decarboxylated products of e‐ and o‐DAs. For the degradation of butanedioic acid, (45.9±0.5) % of the oxygen in the formed propanedioic acid came from H₂O, whereas for pentanedioic acid, (97.4±0.2) % of the oxygen in the formed butanedioic acid came from H₂O. Our results demonstrate that in TiO₂‐based photocatalysis, the reactivity of active species, such as ^. OH/h_vb⁺, is far from non‐selective and that the attacks of these active species on organic substrates are significantly affected by the coordination patterns of the substrates on the TiO₂ surface.     

Preparation of P(MBA‐co‐MAA)/Zr(OH)4/P(EGDMA‐co‐MAA)/TiO2 Tetra‐layer Hybrid Microspheres and the Corresponding ZrO2/TiO2 Double‐shelled Hollow Microspheres

Double‐shelled zirconia/titania (ZrO₂/TiO₂) hollow microspheres were prepared by the selective removal of the polymer components via the calcination of the corresponding tetra‐layer poly(N,N′‐methylenebisacryl amide‐co‐methacrylic acid) (P(MBA‐co‐MAA))/Zr(OH)₄/poly(ethyleneglycol dimethacrylate‐co‐methacrylic acid) (P(EGDMA‐co‐MAA))/TiO₂ hybrid microspheres. These tetra‐layer microspheres were synthesized by the combination of the distillation copolymerization of N,N(‐methylenebisacryl amide‐co‐methacrylic acid (MBA) or ethyleneglycol dimethacrylate (EGDMA) crosslinker and methacrylic acid (MAA) for the preparation of polymer core and third‐layer as well as the controlled sol‐gel hydrolysis of inorganic precursors for the construction of zirconium hydroxide (Zr(OH)₄) and titania (TiO₂) layers. The thicknesses of zirconia and titania shell‐layers were conveniently controlled via varying the feed of zirconium n‐butoxide (Zr(OBu)₄) and titanium tetrabutoxide (TBOT) during the sol‐gel hydrolysis, while the sizes of polymer layers were tuned through a multi‐stage distillation precipitation copolymerization. The structure and morphology of the resultant microspheres were characterized by transmission electron microscopy (TEM), X‐ray diffractometer (XRD), X‐ray photoelectronic spectroscopy (XPS), and thermogrametric analysis (TGA).     

铂修饰的{001}面暴露的二氧化钛纳米片阵列的制备和光催化性能

采用有机溶剂热法在FTO衬底上制备{001}面暴露的单晶锐钛矿相TiO2纳米片阵列,通过FESEM和XRD研究样品的形貌和晶体结构. 与水热法制备的纳米片阵列相比,有机溶剂热法制备的样品取向性更好. 采用光沉积方法在纳米片阵列上沉积Pt,所得到的Pt纳米颗粒粒径更为均匀,并且更容易沉积在{001}面上. 所负载的Pt 纳米颗粒增强了TiO2纳米片的光吸收性能,同时大大减弱了光致发光强度. 在光催化性能测试中,具有最优负载量的样品催化性能提高了一倍. 与传统的Pt负载相比,{001}面的最优负载量显得相当小,这可能源于高活性{001}面的原子结构.     

Magnetic Titanium Dioxide Nanocomposites for Surface‐Enhanced Resonance Raman Spectroscopic Determination and Degradation of Toxic Anilines and Phenols

Mesoporous M‐TiO₂ NCs, functionalized by PATP, can capture toxic anilines and phenols by azo coupling. Loading these nanodevices with Ag NPs offers the possibility for a sensitive quantitative determination of target compounds by SERRS spectroscopy, which allows multiplex detection because of the specific vibrational fingerprints. Sensitivity and selectivity can be further enhanced by concentrating the hybrid particles by an external magnet and compound‐specific binding (anilines versus phenols). The bound toxic compounds can be degraded by TiO₂‐assisted photocatalysis after removal of the loaded hybrid particles from the sample solution with an external magnet. The degradation process can be enhanced in the presence of plasmonic Ag nanostructures.     

锂离子电池TiO2纳米管负极材料

锂离子电池负极材料二氧化钛(TiO₂)由于其零应变、环境友好和高安全性近年来得到了广泛的研究,但其较低的电子电导和离子迁移率以及较低的比容量(335 mAh·g^-1)限制了其应用前景.本文梳理了一种纳米结构TiO₂纳米管(TNTs)的研究历程以及最近研究进展,综述了TNTs常见的几种制备方法,即水热法、阳极氧化法和模板法及其形成机理,归纳了各种制备方法的优缺点,讨论了制备过程中各项参量对制得TNTs的影响.阐述了其晶体结构与形貌对电化学性能的影响,指出晶格取向一致、管壁厚度小,纳米管开口且同向排列的TNTs具有更好的电化学性能.同时探讨了针对该材料电导性差、比容量低而进行的包括结构设计、掺杂、复合等一系列改进措施,指出与高电导率及高比容量材料复合是一种方便有效的改进措施.最后总结了各种改性方法取得的进展及存在的不足,展望了TNTs的研究趋势和发展前景.     

还原氧化石墨烯/TiO2纳米复合物制备及其光催化性能

采用一步水热法制备了还原氧化石墨烯-二氧化钛(RGO-P25)纳米复合物.通过透射电子显微镜(TEM)、傅里叶变换红外(FTIR)光谱、X射线光电子能谱(XPS)、X射线衍射(XRD)及紫外-可见漫反射谱(UVVisDRS)对复合材料的结构和光电性能进行了表征.在紫外光照和可见光照条件下,研究了不同复合比例的复合物的光催化降解甲基蓝(MB)的性能.结果表明:在水热过程中氧化石墨烯被还原,通过静电引力相互作用得到了具有较高缺陷的还原氧化石墨烯复合物.随着RGO含量的增加,复合物的禁带宽度由3.00 eV变到2.27eV,复合物的导电性增强.在可见光和紫外光光照条件下, 30 min内1%(w,质量分数)RGO-P25光催化降解甲基蓝的效率都超过了80%.紫外光照条件下, 1%RGO-P25纳米复合物催化降解N3染料, cis-Ru(H₂dcbpy)₂(NCS)₂ (H₂dcbpy = 4, 4'-二羧酸-2, 2'-联吡啶), 30 min内63%(摩尔分数)的染料被降解.与P25(75%锐钛矿, 25%金红石)相比,石墨烯的加入大大提高了光催化效率,有效抑制了电子-空穴对的复合.     

β-PbO2/TiO2纳米管电极的制备及其电催化降解苯酚

采用阳极氧化法和脉冲电沉积制备出β-PbO2改性TiO2纳米管(β-PbO2/TiO2-NTs)电极,通过扫描电子显微镜(SEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等技术手段对制备的β-PbO2/TiO2-NTs电极的表面形貌和结构进行了表征。结果表明,该方法成功地将β-PbO2纳米颗粒分散在TiO2纳米管中,通过电催化降解苯酚评价了β-PbO2/TiO2-NTs电极的电催化活性,实验结果表明,在TiO2-NTs中电沉积β-PbO2提高了电极的电催化活性,对苯酚的降解达到83%。     

TiO2 nanotube arrays prepared by anodization as an adsorbent in micro‐solid‐phase extraction to preconcentrate and determine nitrogen‐containing polycyclic aromatic hydrocarbons in water samples

In this study, a simultaneous determination method for nitrogen‐containing polycyclic aromatic hydrocarbons including 7‐methylquinoline, acridine, 5,6‐benzoquinoline, carbazole, and 9‐methylcarbazole was developed. This method is based on a micro‐solid phase extraction using TiO₂ nanotube arrays as an adsorbent in combination with HPLC. Some factors that had an effect on the enrichment were optimized, such as sample pH, surfactant concentration, ion strength, type of eluent, equilibrium time, and desorption time. Under the optimized conditions, the linear ranges and LODs were in the range of 0.01–100 and 0.0035–0.81 μg/L, respectively. The precisions of the proposed method were <9.51% (RSD, n = 6). The developed method was validated with four real samples, and the spiked recoveries were in the range of 77–109.6%. All these results demonstrated that this novel micro‐solid‐phase extraction technique was a reliable alternative to conventional preconcentration method for the extraction and analysis of such nitrogen‐containing polycyclic aromatic hydrocarbons in complex samples.