Simultaneous construction of a polyether backbone and a variety of keto side chains by three‐component polycondensation: An improved method for the use of a variety of silyl enol ethers

For the synthesis of polyethers with a variety of keto side chains in a one‐step reaction, the three‐component polycondensation of dialdehydes, diol disilyl ethers, and silyl enol ethers of ketones was investigated. The method of monomer addition strongly affected the molecular weight of polymers and was optimized to yield high molecular weight polymers by model reactions. A variety of dialdehydes, diol disilyl ethers, and silyl enol ethers were polymerized in the presence of a catalytic amount of triphenylmethyl (trityl) perchlorate in CH₂Cl₂ at −78 °C according to the method of monomer addition. This polymer synthesis was unusual in that it concurrently constructed both the polyether backbone and the keto side chains from three starting compounds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 179–188, 2000     

Synthesis and Characterization of donor‐functionalized ansa‐Cyclopentadienyl‐Indenyl and ansa‐Indenyl‐Indenyl Complexes of Yttrium,Samarium, Thulium,and Lutetium

The stepwise reaction of Me₂SiCl₂ with K[C₅H₃ ^tBuMe‐3] or Li[C₉H₇] and then with K[C₉H₆CH₂CH₂‐ NMe₂‐1] followed by double deprotonation with NaH or LiBu, yields the two dimethylsilicon bridged cyclopentadienyl‐indenyl and indenyl‐indenyl donor‐functionalized ligand systems K₂[(C₅H₂ ^tBu‐3‐Me‐5)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)] ( 1 ), and Li₂[(1‐C₉H₆)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)] ( 2 ), respectively. Treatment of 1 with YCl₃(THF)₃, SmCl₃(THF)_1.77, TmI₃(DME)₃, and LuCl₃(THF)₃ gives the mixed ansa‐metallocenes [(C₅H₂ ^tBu‐3‐Me‐5)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)]LnX (X = Cl, Ln = Y ( 3 ), Sm ( 4 ), Lu ( 5 ); X = I, Ln = Tm ( 6 )), respectively. The reaction of 2 with LuCl₃(THF)₃ yields [(1‐C₉H₆)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)]LuCl ( 7 ). Compound 4 reacts with LiMe to give the corresponding alkyl derivative [(C₅H₂ ^tBu‐3‐Me‐5)SiMe₂(1‐C₉H₅CH₂CH₂NMe₂‐3)]Sm(CH₃) ( 8 ). The new complexes were characterized by elemental analyses, MS spectrometry, and NMR spectroscopy. The molecular structures of 5 and 6 were determined by single crystal X‐ray diffraction.     

Ionic Liquid‐Based Routes to Conversion or Reuse of Recycled Ammonium Perchlorate

New, potentially green, and efficient synthetic routes for the remediation and/or re‐use of perchlorate‐based energetic materials have been developed. Four simple organic imidazolium‐ and phosphonium‐based perchlorate salts/ionic liquids have been synthesized by simple, inexpensive, and nonhazardous methods, using ammonium perchlorate as the perchlorate source. By appropriate choice of the cation, perchlorate can be incorporated into an ionic liquid which serves as its own electrolyte for the electrochemical reduction of the perchlorate anion, allowing for the regeneration of the chloride‐based parent ionic liquid. The electrochemical degradation of the hazardous perchlorate ion and its conversion to harmless chloride during electrolysis was studied using IR and ³⁵Cl NMR spectroscopies.     

多孔纳米CoFe2O4的制备及其对高氯酸铵的热分解催化性能

采用胶晶模板法制备出具有三维多孔结构的纳米CoFe₂O₄。利用X射线衍射仪(XRD)、傅里叶变换红外(FT-IR)光谱仪、扫描电镜(SEM)、透射电镜(TEM)和N₂吸附-脱附对样品的晶型和形貌结构等进行表征,采用差示扫描量热法(DSC)对比研究多孔纳米CoFe₂O₄和球形纳米CoFe₂O₄对高氯酸铵(AP)的热分解性能的影响,并考察这两种催化剂对AP催化热分解的动力学参数。结果显示,制备出的多孔纳米CoFe₂O₄样品具有典型的尖晶石结构,孔径约200 nm;比表面积明显高于40 nm球形CoFe₂O₄,达到55.646 m²·g^-1。DSC测试结果表明：多孔纳米CoFe₂O₄的加入促进了AP的热分解,最高使AP的高温分解峰温降低91.46℃,能量释放最高达1120.88 J·g^-1,是纯AP分解放热量的2.3倍;多孔纳米CoFe₂O₄具有较高的比表面积,能提高催化反应的接触面积,使AP的高温分解峰温度更低,反应活化能较小,从而表现出比球形纳米CoFe₂O₄更高的催化活性。此外,对多孔纳米CoFe₂O₄催化AP的热分解机理进行初步探索,纳米多孔催化剂对气态中间产物的作用促进了AP的热分解。     

离子色谱法测定葡萄酒中的高氯酸盐

建立了离子色谱测定红酒中高氯酸盐的分析方法。以4种葡萄酒为典型样品,测定了其中的高氯酸盐含量。使用Metrosep A Supp5阴离子分析柱（150 mm×4.0 mm）进行分离,柱温为40℃,流动相为1.0 mmol/L碳酸钠水溶液-丙酮（85：15,v/v）,流速为0.8 mL/min。结果表明,高氯酸盐在0.1~10 mg/L内具有良好的线性关系,相关系数为0.9998,方法回收率大于86.0%,相对标准偏差小于2.6%。该方法前处理方便快捷、检测灵敏度高,可满足红酒中高氯酸盐含量的测定。     

5-氨基双四唑富氮配位化合物的合成、结构及其对高氯酸铵的热分解影响

水热条件下合成了两个5-氨基双四唑配位化合物Cu(bta)(bpy)(H2O)(1)和Pb2(bta)2(en)2.4H2O(2)(H2bta=5-氨基双四唑,bpy=2,2′-联吡啶,en=乙二胺),并借助单晶X-射线衍射技术对其结构进行了表征。在配合物1中,5-氨基双四唑配体以双齿螯合模式与铜离子配位形成离散的分子,并通过H键作用进一步形成了三维的超分子结构。在配合物2中,强的R22(8)氢键环作用将双核的Pb2(bta)2(en)2单元连接成一维的链,这些链通过与水分子氢键作用被进一步组装成三维的超分子结构。另外,通过DSC技术探究了它们作为添加剂对高氯酸铵的热分解催化影响。研究发现,铅基化合物2的催化效果较铜基化合物1要好。     

ADDUCTS OF THEOBROMINE WITH 3d METAL PERCHLORATES

Abstract

Adducts of theobromine (tbH) with 3d metal perchlorates (Mⁿ⁺ = Cr^3-. Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn^2- I here prepared by refluxing mixtures of the Iigand and a metal salt in ethyl acetate-triethyl orthoformate. The new complexes invariably involve 2: 1 molar ratios of tbH to metal ion and are apparently monomeric with terminal tbH ligands binding riaa ring nitrogen (N9 or Nl). The Mn²⁺, Cu²⁺ and Zn^2- complexes are distorted tetrahedral, involving tuo tbH and two unidentate perchlorato ligands in the first coordination sphere of the metal ion. The remaining metal(II) complexes (Fe, Co, Ni) were obtained as monohydrates. These compounds are pentacoordinated of the [M(tbH)₂(OClO₃)₂(OH₂)] type, containing one aqua ligand in addition to the tbH and perchlorato ligands. The Cr³⁺ and Fe³⁺ complexes are low-symmetry hexacoordinated, with two tbH ligands. two unidentate and one bidentate chelating perchlorate Iigands.     

Method for the Synthesis of 2-(2-Furyl)acrylonitriles

A new method was developed for the production of 2-(2-furyl)acrylonitriles on the basis of the Schmidt reaction.     

高氯酸锂在有机溶剂中离子溶剂化和离子缔合的红外光谱研究

利用红外光谱技术研究了LiClO4在碳酸丙烯酸,γ－丁内酯和碳酸二乙酯中的离子缔合和离子溶剂化。溶剂分子谱带的变化证明,锂离子与溶剂分子的相互作用主要是通过羰基氧原子进行的,醚氧也可能参与了相互作用,高氯酸锂的v1和v4谱带变化则证明了溶液中离子对的存在,而离子对的种类与溶剂分子的特性有关。     

基于非线性偏振旋转效应的多波长掺铥锁模光纤激光器

运用非线性偏振旋转效应实现了一种掺铥锁模多波长光纤激光器.采用环形腔结构,以1 565nm半导体光源为泵浦源,3m长掺铥光纤为增益介质.利用非线性偏振旋转效应进行滤波.当泵浦功率在800mW时,通过调节光纤偏振控制器,激光器出现了被动锁模状态的脉冲输出,脉冲重复频率为3.178MHz,脉冲宽度为617ps.进一步增加泵浦功率,激光器进入多波长输出的工作状态.调节偏振控制器在室温下得到1~5个稳定的波长激光输出,边摸抑制比为40~60dB.