具有特大磁电阻效应钙钛矿材料的制备及性能分析

通过固相烧结法制备了具有特大磁电阻效应的钙钛矿材料Pr0.64Ag0.044MnAl0.2O3.利用结构和成分分析,发现此材料只有在1 100℃高温烧结下才能生成完整的钙钛矿结构,且属于立方晶系,晶格常量a≈0.386 nm.在0.4 T的外磁场下,磁电阻值在122 K处达到最大,约为19.2%,为巨磁电阻实验提供了较好的样品.     

利用迈克耳孙干涉仪重建蜡烛火焰温度场

利用教学实验中的迈克耳孙干涉仪,进行蜡烛火焰温度场的测量.对干涉条纹进行了处理和细化,并分别用阿贝尔变换法和环带法对蜡烛火焰的温度场进行了计算,得到蜡烛火焰横截面上温度场的定量结果.     

高性价比电子标准电池

为了避免化学标准电池由于自身特点在使用中存在诸多不便,采用集成温度传感器LM334设计制作了电子标准电池,同时在设计电路中还采用了两级稳压措施以保证标准电池输出的稳定性.     

Critical temperature and condensed fraction of Bose-Einstein condensation in optical lattices

Critical temperature and condensate fraction of Bose-Einstein condensation in the optical lattice are studied. The results show that the critical temperature in optical lattices can be characterized with an equivalent critical temperature in a single lattice, which provide a fast evaluation of critical temperature and condensate fraction of Bose-Einstein condensation confined with pure optical trap. Critical temperature can be estimated with an equivalent critical temperature. It is predicted that critical temperature is proportional to q in q number lattices for superfluid state and should be equal to that in a single lattic for Mott insulate state. Required potential depth or Rabi frequency and maximum atom number in the lattices both for superfluid state and Mott state are presented based on views of thermal mechanical statistics.     

MOCVD制备InxGa1－xN/GaN MQWs的温度依赖性

利用方势阱模型对In_xGa_1－xN/GaN MQWs结构的光特性进行了量子力学定性理论分析.并在MO源流量恒定条件下，在570℃～640℃范围内进行了不同生长温度的多量子阱制备实验，对In_xGa_1－xN制备过程中的In组份掺入效率的温度依赖关系进行研究.通过对制备样品的PL谱测量分析，得到了587℃～600℃的In组份最佳掺入温度区间.     

火焰辐射及偶丝导热对热电偶测温影响的数值分析

本文利用层流同向扩散乙烯火焰的数值模拟结果,根据所得的火焰温度场、气体速度场、火焰辐射场,分析火焰辐射、热电偶偶丝导热对热电偶测温的影响.结果表明在火焰的低温区火焰辐射要大于节点向外辐射,节点得到的能量要高于节点损失的能量,因此在火焰的低温区节点温度要高于当地的气体温度;同时直径为100μm的热电偶存在较大的导热,对节点温度测量有较大的影响.     

SECRAL等离子体韧致辐射谱的测量

The axial emitted bremsstrahlung spectra were measured on SECRAL(Superconducting ECR ion source with Advanced design in Lanzhou)using an HPGe detector.The spectral temperature T_(spe) was obtained from the linear fit of the spectra in the semi-log present.The evolution of T_(spe) with microwave power and magnetic field configuration is investigated in this paper.     

��Ԥ���븨�������赲�ŵ�ת���¶ȵ��о�

用火花预电离辅助介质阻挡放电装置在大气压空气中实现了均匀的类辉光放电。通过用光谱模拟法和波尔兹曼图解法对N 2 第一负带系B2Σ→X 2Σ(0,0)带发射谱线的分析,对放电过程中N 2 的转动温度进行了诊断。研究了不同频率和放电模式下转动温度的变化规律,对由两种方法计算所得的温度进行了对比。实验结果表明,转动温度会随着外加频率的增加而缓慢的增加;当放电从类辉光模式变到丝状放电模式时,转动温度会有70K左右的升高。     

Emission properties of thin films of electroactive doped polymers

We have studied the effect of the intensity of the exciting radiation and the temperature on the emission properties of two kinds of thin-film samples based on blends of two types of organic electroactive materials: polyfluorene + iridium triphenylpyridinate and polyepoxypropylcarbazole + zero-th order PAMAM dendrimer with eosin. We have shown that an increase in the excitation intensity leads to an increase in the intensity of the luminescence of the polymer matrices and the iridium complex up to a power density of 300 kW/cm², and the emission of the dendrimer is rapidly saturated and does not return to the initial value when the excitation level decreases. Heating up to 170°C followed by cooling causes an increase in the intensity for all the components except the dendrimer. The data obtained show that annealing is an important method for improving the emission efficiency of the proposed thin-film structures, due to a change in the packing of the activator molecules in the polymer matrix leading to more efficient transfer of the excitation energy. Molecules of the studied dendrimer are not stable when exposed to optical radiation and temperature. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 820–825, November–December, 2007.     

Effect of the stagnation temperature on supersonic flow parameters: Application for air in nozzles

When the stagnation temperature of a perfect gas increases, the specific heats and their ratio do not remain constant any more and start to vary with this temperature. The gas remains perfect and its state equation always remains valid, except it will be called a calorically imperfect gas. The aim of this research is to develop the relations of the necessary thermodynamics and geometrical ratios and to study the supersonic flow at high temperature (lower than the threshold of dissociation). The results are found by the resolution of nonlinear algebraic equations and integration of complex analytical functions where the exact calculation is impossible. The dichotomy method is used to solve the nonlinear equation, and the Simpson algorithm is used for the numerical integration of the found integrals. A condensation of the nodes is used, since the functions to be integrated have a high gradient at the extremity of the interval of integration. A comparison is made with a calorifcally perfect gas to determine the error of this. An application is made for air in a supersonic nozzle. The text was submitted by the authors in English.