三维还原氧化石墨烯/β-环糊精复合物的合成及其电化学检测水中左氧氟沙星北大核心CSCD

成功构筑了β-环糊精修饰的三维还原氧化石墨烯复合材料(3D-rGO/β-CD),并对该复合材料进行扫描电子显微镜、傅里叶红外光谱、热重分析和拉曼光谱分析等一系列的表征,分析了其形貌和结构的特征。进一步将其修饰到玻碳电极(GCE)表面,构建了一种新型电化学传感器(3D-rGO/β-CD/GCE)。利用3D-rGO/β-CD/GCE电化学传感器,通过微分脉冲伏安法(DPV)对左氧氟沙星(LEV)进行了检测。其中,具有多孔结构的三维还原氧化石墨烯具有优异的导电性能、比表面积大、化学稳定性好等优良的性质,而修饰的β-环糊精能在其环形腔内与客体分子结合形成超分子包合物,进而可以对LEV进行有效识别。研究结果显示,在最优实验条件下,3D-rGO/β-CD/GCE对左氧氟沙星的检测具有较宽的线性范围(1~150μmol/L),且检测限可达0.33μmol/L,同时该修饰电极还表现出良好的选择性和稳定性。此外,成功将其应用于实际水样中LEV的检测,表明该传感器具有一定的应用潜力。     

Three-dimensional bundle-like multiwalled carbon nanotubes composite for supercapacitor electrode application

Bundle-type mutil-walled carbon nanotubes (MWCNTs) composite electrode is the first investigation and publication for the supercapacitor application. According to the thermogravimetric analysis results, as-synthesized BCNTs are considered as the electrode materials for supercapacitors and electrochemical double-layer capacitor in this study. The Brunauer–Emmett–Teller specific surface area of as-prepared bundled carbon nanotubes (BCNTs) is 95.29 m²/g given to a type III isotherm and H3 hysteresis loops. Slow scanning rates promote and enhance to achieve high C_b because of the superior conductivity of CNT bundles and one side close-layered Ni/Mg/Mo alloy inside the BCNT-based electrode and facile electron diffusivity between electrolyte and electrode. The specific capacitance C_s (1,560 F/g) is nearly equal to the maximum specific capacitance, which the BCNT-based composite electrode can actually be able to charge or fill in. The maximum energy density value is 195 Wh/kg with corresponding power density values of 0.21 kW/kg. Furthermore, the active 3D BCNTs material fabricated electrode enhances to contact the electrolyte directly and decreases the ion diffusion limitation. Electrochemical impedance spectroscopy spectrum summarized as the low-frequency area controls by mass transfer limitation, and the high-frequency area dominates by charge transfer of kinetic control. After 2,000 consecutive cyclic voltammetry sacnings and galvanostatic charge-discharge cycles at a current density of 1.67 A/g performs, the specific capacitance retentions of 3D BCNTs electrodes achieved 128.2 and 77.3%, respectively. Three-dimensional BCNT composite electrodes exhibit good conductivity and low charge transfer resistance, which is beneficial to fast charge transfer between the BCNTs electrode materials and electrolytes.     

有序排列PMMA 模板法合成三维有序纳米孔道MgO

"利用由无乳化剂的乳液聚合法和水浮法联用技术合成得到的有序排列的聚甲基丙烯酸甲酯(PMMA)微球为硬模板,以硝酸镁为镁源,并采用硝酸镁-柠檬酸-乙醇混合溶液浸渍PMMA微球后经干燥以及先后在300 ℃恒温灼烧3 h和500 ℃恒温灼烧5 h,制备出具有有序纳米孔道结构的MgO粒子．应用X射线衍射、高分辨扫描电子显微镜、透射电子显微镜/选区电子衍射以及N2吸附-脱附法等技术表征了PMMA和MgO样品的物理化学性质．结果表明,所得PMMA微球颗粒较为均匀,粒径约为284 nm,且排列规整有序．由PMMA硬模板     

激光诱导三维网状石墨烯的一步法制备及应用

三维多孔石墨烯作为一种优异的石墨烯碳材料, 其独特的多孔结构使得材料在具有较大比表面积的同时还保持着足够高的电子迁移率和机械稳定性, 在电子器件中得到了广泛的应用. 本文介绍的激光诱导石墨烯是一种以一步法直接制备得到的三维网状石墨烯材料, 该技术将三维石墨烯的制备和图案化相结合, 无需进行湿化学反应处理, 制作方法更简便, 材料性能更优异. 目前研究主要集中在通过掺杂提高性能和利用转移法实现不同基底器件的制备. 激光诱导石墨烯自身特有的属性如多孔微纳米结构和大的比表面积等使其在超级电容器和传感器等领域拥有较高的应用价值.     

Year Discrimination of Mild Aroma Chinese Liquors Using Three-Dimensional Fluorescence Spectroscopy Combined with Parallel Factor and Neural NetworkSCIEI北大核心CSCD

Three-dimensional fluorescence spectroscopy coupled with parallel factor analysis and neural network was applied to the year discrimination of mild aroma Chinese liquors. The excitation-emission fluorescence matrices (EEMs) of 120 samples with various years were measured by FLS920 fluorescence spectrometer. The trilinear decomposition of the data array was performed and the loading scores of and the excitation-emission profiles of four components were also obtained. The scores were employed as the inputs of the BP neural networks and the PARAFAC-BP identification model was constructed. 10 samples were collected from 10, 20 and 30 years of liquors respectively, and 30 samples were selected as the test sets. The remaining 90 samples were used as the training sets to build the training model. The year prediction of unknown samples was also carried out, and the prediction accuracy was 90%, 100% and 100%, respectively. Meanwhile, the discrimination analysis method and the multi way partial least squares discriminant analysis were compared, namely PARAFAC-BP and NPLS-DA. The results indicated that parallel factor combined with the neural network (PARAFAC-BP) has higher prediction accuracy. The proposed method can effectively extract the spectral characteristics, and also reduce the dimension of the input variables of neural network. A good year discrimination result was finally achieved.     

三维斑点追踪成像评价甲状腺功能亢进患者左心室收缩功能改变的应用价值

目的 探讨三维斑点追踪成像（3D-STI）技术在评价甲状腺功能亢进(甲亢)患者左心室整体收缩功能中的应用价 值。方法 选择50 例甲状腺功能亢进患者与45 例健康志愿者,获取心尖四腔心切面动态图像,存储左心室三维全容积动态图像后,运用3D-STI 软件进行脱机分析,得到两组收缩期左心室整体纵向峰值应变（GLS）、圆周峰值应变（GCS）、左心室扭转度角度峰值(LV-tw)、左心室扭力（LV-tor）、左心室心底水平旋转角度峰值（Prot-B）、左心室心尖水平旋转角度峰值（Prot-A）及左心室射血分数（LVEF）等,比较两组三维应变（3DS）指标之间的差异。结果 与正常对照组比较,甲亢组的左心室收缩功能增强,GLS、GCS 分别为（-20.47±3.08）% vs.（-18.52±4.77）%、（-28.98±3.00）% vs.（-25.88±2.12）%,两组差异均有统计学意义（均P＜0.05）;甲亢组LV-tw、LV-tor、LVProt-A、LVProt-B 均较正常对照组略有增加,但差异均无统计学意义（均P＞0.05）。结论 3D-STI 可无 创、敏感检测甲亢患者左心室三维应变,为临床客观评估甲亢左心室收缩功能提供一种新方法。     

Characteristic X-ray detector: In-situ imaging of radioactive contaminant distributions

The characteristic X-ray detector (CXRD), a CsI(Tl) scintillator with a 50-mm diameter, is a directional X-ray sensor that measures characteristic X-rays from radioactive material, such as ¹³⁷Cs, and identifies the direction of radioactive contamination. We evaluated a CXRD and visualized the distribution of radioactivity in the contaminated area near the Fukushima Dai-ichi nuclear power station, where the ambient dose equivalent rate was 2.1 μSv/h at 1 m above ground level. We found a good correlation between the characteristic X-ray fluxes and the distribution of radioactive contaminants with a 0.823 Pearson product–moment correlation coefficient.     

三维有序结构In掺杂TiO_2薄膜的可见光催化活性

采用自组装生长聚苯乙烯胶体模板和溶胶-凝胶法,制备出三维(3D)有序结构In掺杂TiO2(IO-TiO2-In)薄膜可见光催化剂.光催化实验证明,IO-TiO2-In薄膜降解甲醛的可见光活性是TiO2和三维有序结构TiO2(IOTiO2)薄膜的5倍.利用X射线电子衍射(XRD)谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫反射吸收光谱确定了催化剂的晶相结构、表面微结构和能带结构.结果表明,IO-TiO2-In薄膜具有锐钛矿型三维有序结构,与TiO2相比,增加了比表面积,提高光的利用率;掺入的In离子在薄膜表面形成In2O3和O-In-Clx(x=1,2)物种,既增强可见光的吸收,又有效地促进了光生载流子的分离,提高了光生载流子在固/气界面参加光催化反应的利用率,使催化剂的可见光催化活性显著提高.     

Preconcentration of chlorophenols in water samples using threedimensional graphene-based magnetic nanocomposite as absorbent

In this paper, a novel magnetic solid-phase extraction method using three-dimensional graphene-based magnetic nanocomposite as adsorbent for the preconcentration of several chlorophenols from water samples prior to high-performance liquid chromatography analysis was developed. Various experimental parameters were investigated. Under the optimum conditions, the enrichment factors of the method were in the range of 186–312, and the limit of detection(S/N = 3) was 0.10 ng/mL. The recoveries of the method were in the range between 85.1% and 101.2%. The developed method has been successfully applied to the determination of chlorophenols in environmental water samples.     

Observation of radially polarized terahertz radiation generated by a sub-picosecond electron beam

The fundamental property of radially polarized terahertz radiation, which is axial symmetry of the polarization state in the radial direction, was measured with a Schottky diode detector and with a terahertz camera and wire-grid linear polarizer. Radially polarized terahertz radiation was generated from coherent transition radiation using a 30-MeV sub-picosecond electron beam. Bow-tie intensity distributions, aligned along the polarization direction, were clearly observed with the terahertz camera and could be rotated by changing the direction of the linear polarizer. The measured intensity distribution agreed with the calculated value. A video of the data can be found online.