Efficiency assessment of wastewater treatment plant based on SPMD sampling

The efficiency of treatment processes forboth municipal and industrial wastewater (treatment plant-Ostrava, Czech Republic) focused on persistent organic pollutants (POPs) was assessed. Semipermeable membrane devices (SPMDs) as a sampling system were applied. Exposed SPMDs were analyzed both for chemical contaminants of POPs and toxicity response. The chemical analyses of PAHs were made by HPLC-FLD, PCDD/Fs and PCBs were analysed by GC/MS/MS on GCQ or PolarisQ (Thermoquest). Ecotoxicity data on chlorococcal alga Desmodesmus subspicatus (Scenedesmus subspicatus) and luminescent bacteria Vibrio fischeri are presented here. All toxicity data as effective volume Vtox are expressed. The results show good treatment ability of the treatment plant and proved used system as an appropriate tool for efficiency assessment of treatment and/or decontamination processes.     

REATMENT AND RESOURCE REUSE OF 1,2,4-ACID PRODUCING EFFLUENT WITH MACROPOROUS POLYMERIC ADSORBENT

1. INTRODUCTION 1,2,4-acid (1-Amino-2-naphthol-4-sulfonic acid) is among the most important naphthalene derivatives which are widely used as the intermediates of dyestuffs. In its production process, however, high strength wastewater streams are gene…     

综合治疗脑梗塞68例观察

脑梗塞是常见病，且大部分可引起偏瘫，失语，智能障碍等后遗症，严重影响病人的生存质量，广州市第六人民医院于１９９５年１月～１９９７年６月采用中西药物，传统治疗，功能障碍治疗，心理治疗，氦氖激光血管内照射，血液光量子疗法，高压氧等综合治疗脑梗塞６８例，总疗程３个月，结果，总有效率９４．１％，显效率６４．１％，明显高于单用药物治疗的显效率，说明综合治疗可提高疗效，减少后遗症及致残率，且病程越短，疗效越好     

PVA／PVP共混物的聚集态结构

热处理前后不同组份比二元共混物聚乙烯醇(PVA)和聚乙烯吡咯烷酮(PVP)的聚集态结构研究表明,热处理可明显提高共混物的结晶性。热处理前样品仅观察到(101)晶面衍射,热处理后可观察到4个以上衍射晶面。结晶度和微晶大小随共混物中PVP含量增加而降低。第二类晶格畸变则随PVP含量增加而增大。     

Effect of Alkali Treatment on the Structure and Catalytic Properties of ZSM-5 Zeolite

Catalytic properties of ZSM-5 zeolite samples pretreated with NaOH solution have been investigated. The samples are characterized by XRD, SEM, chemical analysis, and N2 adsorption.The results indicate that mesopores are created in ZSM-5 crystals under alkali treatment without change the microporous structure and acidic strength of the zeolite, but the crystallinity is greatly decreased under severe treatment. IR indicates that the concentration of silanol is greatly enriched by alkali treatment. The etherification activities of ZSM-5 zeolites are greatly increased byalkali-treatment. The noticeably improved catalytic activity of treated samples is ascribed to the formation of mesopores and greatly enriched silanol group.     

XPS characterization of wood chemical composition after heat‐treatment

XPS was used to characterize the chemical changes occurring after drying or applying a heat‐treatment to beech wood samples. Our results indicate that the surface of this air‐exposed material could be strongly affected either by the ambient atmosphere during storage or by the complex atmosphere in the oven during drying or heat‐treatment. However, the O/C ratio measured after removal of a thin slice of a few millimetres of an untreated sample is in reasonable agreement with that calculated from the well‐established chemical composition of beech. Through this methodology (equivalent to scraping for hard materials) it is expected to get a realistic characterization of the wood. The reliability and repeatability of the XPS measurements have been checked and the method applied to the study of the chemical changes of the beech samples subjected to heat‐treatment. Heating at 240 °C induces a significant decrease of the O/C ratio from 0.55 before to 0.44 after the treatment. Heat‐treatment induces also a decrease of the C₂ carbon contribution (carbon atom bound to a single non‐carbonyl oxygen) associated with an increase of the C₁ carbon contribution (carbon atoms bound only to carbon or hydrogen atoms), in agreement with chemical modifications reported previously in the literature. Thanks to the small analysed area of the equipment used in this study, different spots were analysed to demonstrate the presence or absence of a gradient of chemical composition due to thermal degradation or migration of extractives from within the wood structure to its surface. At the scale of our observations, the different wood samples investigated (dried or heat treated) appear to be homogeneous. Copyright © 2006 John Wiley & Sons, Ltd.     

Fouling Mitigation in a Heat Exchanger: High Cycles of Concentration for a Cooling-Tower Application

The purpose of the present study is to investigate the effect of a physical water treatment (PWT) technology on fouling mitigation in a simulated cooling tower operating at high cycles of concentration. Hard water was produced by evaporating pure water in a circulating open cooling tower, where dissolved calcium carbonate ions became concentrated with time. Heat transfer tests were conducted in a rectangular channel by varying the cycle of concentration (COC) from 5 to 10, and fouling resistances were measured over 270 hrs for each case with and without the PWT treatment. Another test was conducted with no blowdown case with and without the PWT treatment. The fouling resistance at 5 cycles with the PWT treatment was about 70% less than that in the case without the PWT treatment at the end of 270-hr tests. Even at 10 cycles, the PWT treatment reduced the fouling resistance by 60% from the value for the no treatment case. Thus, one can conclude that the PWT technology can help circulating cooling-tower water at relatively high COC for significant freshwater conservation, while keeping fouling resistances below industry standards.     

Cooling Characteristics During Bath Quenching of Test Probe Using Inverse Heat Transfer

It is of engineering importance to accurately predict the surface cooling characteristics in bath quenching of metals and alloys. In this investigation, the surface cooling characteristics in quenching of Wolfson probe are estimated with reasonable accuracy by solving an inverse heat conduction problem. Regularization method is used for smoothening the input temperature measurements at probe center, for superior inversion estimates. The reverse pool-boiling curve is captured on bath quenching characteristic, plotted as cooling velocity versus surface temperature. The prime advantage is the bypassing of convection coefficients, which are uncertain in pool boiling.     

Meissner Anisotropy in Deuterated (TMTSF)2Clo4

Both the Meissner-signal (flux expulsion on cooling through T_c) and the shielding signal (obtained by turning on a field in the superconducting state) have been observed in deuterated single crystals for fields oriented both along and normal to the chain axis. A possible isotope effect on T_c is discussed. We find complete diamagnetism in normal fields and incomplete (～ 40 %) diamagnetism in parallel fields. A dramatic drop of the Meissner-effect in parallel fields well below H_c1 is observed and not yet well explained.