Prediction of intracellular storage polymers using quantitative image analysis in enhanced biological phosphorus removal systems

The present study focuses on predicting the concentration of intracellular storage polymers in enhanced biological phosphorus removal (EBPR) systems. For that purpose, quantitative image analysis techniques were developed for determining the intracellular concentrations of PHA (PHB and PHV) with Nile blue and glycogen with aniline blue staining. Partial least squares (PLS) were used to predict the standard analytical values of these polymers by the proposed methodology. Identification of the aerobic and anaerobic stages proved to be crucial for improving the assessment of PHA, PHB and PHV intracellular concentrations. Current Nile blue based methodology can be seen as a feasible starting point for further enhancement. Glycogen detection based on the developed aniline blue staining methodology combined with the image analysis data proved to be a promising technique, toward the elimination of the need for analytical off-line measurements.     

Sampling and Analysis of Odorous Compounds in Water Treatment Plants

Abstract

The following analytical method has been used to identify some odorous compounds in the air of the water treatment plant Werdholzli, Zurich: sampling of contaminated air with the help of activated carbon, desorption by the solvents carbon disulphide and methylene chloride, separation of the carbon disulfide extract into a polar and a nonpolar fraction by adsorption column chromatography on silica. Hereafter gaschromatographic analysis of the polar fraction on glass capillary column (Ucon HB 5100); detection and identification were achieved by flame ionisation, thermoionic nitrogen selective detector and computerized mass spectrometry (Finnigan 3200 F, data system 6110).

The results show the presence of sulfur compounds: thiophenes, thiazoles; nitrogen compounds: pyrazines; oxygen compounds: phenols, alcohols and some unsatured hydrocarbons. The malodorous compounds were sulfur and nitrogen compounds in the range of 0.01-0.1 ppm.     

Waste Cleaning Waste: Combining Alginate with Biowaste-Derived Substances in Hydrogels and Films for Water Cleanup

Biowaste-derived substances isolated from green compost (BBS-GC) are environmentally friendly reactants similar to humic substances, which contain multiple functionalities, that are suitable for adsorbing different kinds of pollutants in wastewater. Herein, sodium alginate (derived from brown algae) cross-linked with both Ca²⁺ ions and BBS-GC in the form of hydrogels and dried films are proposed as green, easy-to-form, and handleable materials for tertiary water treatments. The results show that both hydrogels and films are mechanically stable and can effectively remove differently charged dyes through an adsorption mechanism that can be described by the Freundlich model. BBS-GC-containing gels always performed better than samples prepared without BBS-GC, revealing that such unconventional materials can integrate waste valorization and water decontamination, potentially providing social and environmental benefits.     

A cation trap for anodic stripping voltammetry: NH3–plasma treated carbon nanotubes for adsorption and detection of metal ions

NH₃–plasma treated multi-walled carbon nanotubes (pn-MWCNTs) with cation traps for the detection of ultratrace quantities of Zn(II), Cd(II), Cu(II), and Hg(II) using square wave anodic stripping voltammetry (SWASV) is described. The pn-MWCNTs use their adsorption performance to enhance the sensitivity. It is found that under optimized conditions Zn(II), Cd(II), Cu(II) and Hg(II) were individually detected at potentials of −1.16, −0.78, −0.268 and 0.108 V, respectively. The detection limit (3σ method) of 0.314, 0.0272, 0.2263, and 0.1439 nM toward Zn(II), Cd(II), Cu(II), and Hg(II) is achievable, respectively. No interference could be seen during the simultaneous detection of Zn(II), Cd(II), Cu(II), and Hg(II). The pn-MWCNTs exhibit excellent selectivity owing to the different ability of adsorption. A study of the ability of pn-MWCNTs in practical application is carried out using a sample of water collected from Dongpu Reservoir in Hefei City, Anhui, China. It is found that the results were favorable when compared against inductively coupled plasma atomic emission spectrometry (ICP-AES) analysis.     

Mechanical properties of sisal fibre-reinforced polymer composites: a review

There has been a growing interest in the utilization of sisal fibres as reinforcement in the production of polymeric composite materials. Natural fibres have gained recognition as reinforcements in fibre polymer–matrix composites because of their mechanical properties and environmental friendliness. The mechanical properties of sisal fibre-reinforced polymer composites have been studied by many researchers and a few of them are discussed in this article. Various fibre treatments, which are carried out in order to improve adhesion, leading to improved mechanical properties, are also discussed in this review paper. This review also focuses on the influence of fibre content and fabrication methods, which can significantly affect the mechanical properties of sisal fibre-reinforced polymer composites.     

Performance Improvement of Acid Pretreated 3D-printing Composite for the Heavy Metal Ions Analysis

The performance enhancement of 3D-printed electrode comprised of polylactic acid (PLA) and graphite (Gr) doped with graphene oxide (GO) was studied to detect five heavy metal ions in trace level. The pretreatment of PLA/Gr/GO electrode with potential cycling in H₂SO₄ solution achieved the most sensitive response. The characteristics of the composite electrodes were verified using XPS, FE-SEM, EDXS, Raman, and impedance spectroscopy. The experimental variables affecting the response current were optimized with respect to pH, deposition time, ratio of PLA/Gr/GO, and supporting electrolytes. The pretreated 3D-PLA/Gr/GO electrode showed a wide dynamic range from 0.5 ppb to 1.0 ppm with low detection limits of 0.039–0.13 ppb. The reliability of the PLA/Gr/GO electrode was evaluated by analyzing the reference samples of European Reference Materials.     

Influence of the pH Value on the Hydrothermal Degradation of Fructose

The hydrothermal treatment of sugars features a promising technology for the production of fine and platform chemicals from renewable resources. In this work the hydrothermal decomposition of fructose was studied in a buffered medium at a pH range between 2.2 and 8.0. It is demonstrated that at lower pH values mainly 5-hydroxymethylfurfural (HMF), levulinic acid and humin are generated, while lactic acid and acetic acid are produced at higher pH values. The work shows that the use of moderate acidic conditions may have advantages for the hydrothermal HMF production over the use of strongly acidic conditions, as especially the degradation into levulinic acid is suppressed. Besides, this study deals with a rather complex reaction network, hence limitations and need for adaption of the kinetic model are discussed.     

A potential flower-like coating consisting of calcium-phosphate nanosheets on titanium surface

A potential calcium-phosphate fl ower-like nanocoating were coated onto the titanium surface in an easy approach. It has high surface area, low cytotoxicity as well as promising cell affi nity, which makes it a potential alternative modifi cation method for titanium surface.     

Influence of Carbon Multiple Treatments on the Photoelectrical Properties of Porous Glasses

We have studied the influence of multiple carbon treatments on the properties of silica porous glasses. Each step of each carbon treatment started with filling the voids of porous glass with carbon. During the following anneal carbon interacted with the walls of the voids. It was shown that low dimensional silicon clusters were formed inside the voids as a result of this reaction. In the experiments the photoluminescence spectra and conductivity of carbon-processed specimens were measured. The size-distribution of voids in porous glasses was calculated from absorption—desorption isotherms. An original technique was proposed that allowed to obtain the size-distribution of silicon clusters from the positions of peaks in the photoluminescence spectra. Correlation between the photoluminescence intensity and the sizes of pores was revealed. The observed oscillations in the shapes of the photoluminescence spectra in subsequent cycles of carbon treatment are explained by changes of the number of clusters corresponding to definite peaks in the size distribution spectra.