A study of the oxidation of vegetable oils by inverse gas chromatography

Summary Inverse gas chromatography is shown to be suitable for the study of the oxidation of vegetable oils. With air as carrier gas characteristic plots of retention index versus time are obtained for hydroxylic test solutes that are consistent with the oxidation behaviour of vegetable oils. Shifts of retention are found to be accompanied by changes of column efficiency due to the oxidative crosslinking of polyunsaturated vegetable oils. The technique also leads to useful information concerning the oxidation of antioxidant inhibited systems. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Phase Analysis of the Binary System of Cryolite (Na3AlF6) and Sodium Metasilicate (Na2SiO3)

The phase analysis of cryolite (Na₃AlF₆) and sodium metasilicate (Na₂SiO₃) was performed by thermal analysis. The eutectic system with a region of two immiscible substances at a concentration of Na₂SiO₃ between 42.8 and 46.3 mol‐% was identified and the eutectic temperature determined to (886±2) °C. Based on the results of mass‐loss measurements, it was assumed that the introduced Na₂SiO₃ reacts with Na₃AlF₆ due to the formation of some nonvolatile stable compounds. The stable reaction products were identified by X‐ray diffraction analysis and IR spectroscopy of the spontaneously cooled samples, which established the formation of NaF and stable amorphous aluminosilicate compounds.     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

Thermal degradation behaviors of some branched and linear polysiloxanes

The thermal degradation behaviors of some branched and linear polysiloxanes were studied by thermogravimetric (TG) analysis and infrared (IR) spectroscopy, and the effect of phenyl content on the thermal stability of the tested branched polysiloxanes was investigated. The branched polysiloxanes with phenyl obtain higher thermal stability at lower temperature. The degradation residues of the examined branched polysiloxanes at 800 °C are rather high, 65.1-77.6% in N₂ and 40.5-66.5% in air, respectively. However, the amount of solid residue increases with decrease in phenyl content in both N₂ and air atmospheres. It was found that the thermal stability of the branched polysiloxanes is higher than that of the linear one, which indicated that the branched structure benefits the formation of a crosslink in the solid residue.     

Effect of a novel phosphorous-nitrogen containing intumescent flame retardant on the fire retardancy and the thermal behaviour of poly(butylene terephthalate)

A novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) was prepared via the reaction of a caged bicyclic phosphorus (PEPA) compound and 4,4′-diamino diphenyl methane (DDM) in two steps. The product was added to poly(butylene terephthalate) (PBT) to obtain halogen-free flame retarded polyester. UL-94 test, thermogravimetry and in situ infrared spectroscopy were used to characterize the flammability, thermal degradation properties and the char-forming process. It was shown that the phosphorus-nitrogen containing compound could improve both the flame retardancy and thermal stability more effectively than other P-N flame retardants. Furthermore, it was a good char-forming agent incorporated with the co-addition of polyurethane (PU) when the combustion occurred. The formation of P-N structure was incorporated in the char layer.     

A new type of two-dimensional packed + capillary column GC system. I. Theory

Summary To match the need of high efficiency capillary column (plate number N₂, Plate height H₂ and carrier gas linear velocity U₂), a new high efficiency packed column (N₁, H₁ and U₁) at high carrier gas velocity with small capacity factor has been developed in the light of theoretical discussion of factors effecting the column efficiency utilization ratio.     

TiO2光催化反应及其在环境保护中的应用

本文简要介绍了TiO2光催化剂的作用机理，讨论了影响TiO2光催化效率的因素及解决途径，综述了光催化在环境保护中的最新应用。     

SAPO－5，－11和－34分子筛模板剂的脱除及其结构的热致变化

用水热法合成了ＳＡＰＯ－５，－１１和－３４硅磷酸铝类分子筛。并对经不同温度焙烧处理的样品进行表征，结果表明：分子筛中模块剂的热分解过程与其结构和孔大小有较大的关系。在ＳＡＰＯ－５和ＳＡＰＯ－３４分子筛中，外部联接的Ｔ－Ｏ－Ｔ键的反对称伸缩振动峰（１２４０ｃｍ~（－１）－１０３８ｃｍ~（－１））和其对称伸缩振动（７３４ｃｍ~（－１）－６００ｃｍ~（－１））及双环的变形振动（６００－５００ｃｍ~（－１））的吸收峰对样品的结晶度比较敏感。但在ＳＡＰＯ－１１中，分子筛骨架中Ｔ－Ｏ－Ｔ反对称伸缩振动（１２２５ｃｍ~（－１）和１０３８ｃｍ~（－１））随结晶度的下降而基本保持不变，但内四面体（ＴＯ_４）的对称伸缩振动，反对称伸缩振动峰及Ｔ－Ｏ弯曲振动峰随样品焙烧温度的升高而减弱并分裂。红外吸收带向低频方向移动。ＳＥＭ－ＥＤＡＸ结果表明：随样品焙烧温度的升高，结晶度下降，分子筛晶形变得不规则，晶面越来越粗糙，但结晶度的下降并非由于其中ＰＯ_４四面体的热分解所引起，而是由外部联结的Ｔ－Ｏ－Ｔ键的断裂，双环被破坏及骨架元素间的重排所引起。