硅胶键联MPc的制备及其在氧活化中的作用

过渡金属酞等配合物（MPC）用手均相液相氧化中作催化剂已有不少报导，象许多均相催化剂一样，MPC用于均相反应存在着难于从反应体系中分离出来的问题．把均相配合物催化剂固载在无机氧化物如硅股或有机高分子载体上是解决这一问题的一种方法．我们曾尝试把MP。固载在分子筛载体和硅胶载体上，并用ESR研究其对O2的活化作用[1，2]．本文报导MPc通过共价键键联固载在SiO2上，并研究其对O2的活化作用．1实验部分1．1试剂HSIC13为日本东京化成株式会社产品，二级试剂·发烟硫酸（SO。质量分数大于20％）为分析纯试剂．PCl5为化学纯试…     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Theoretical prediction of the contact distance dependence of the electron transfer reactivity of the ClO/ClO− coupling system

On the basis of the structures and properties of the ClO/ClO^? system obtained at the density functional theory (DFT) (UB3LYP) level, employing the 6‐311+G(3df) standard basis set, the electron transfer reactivity of this system is investigated. The results indicate that there are five possible stable coupling complexes that correspond to the generous minima on the global potential energy surfaces (PES). The most stable coupling complex is planar EC4, in which there is a O? O linkage with two trans‐Cl atoms. Their stabilization energies are calculated to be 20.57 (EC1: C₁), 20.54 (EC2: C₂, ²B), 20.69 (EC3: C₁), 20.70 (EC4: C_s, ²A′), and 20.69 (EC.5: C_2h, ²B_u) kcal/mol at the B3LYP/6‐311+G(3df) level; with the correction of the basis set superposition error (BSSE), the stability order of these encounter complexes is EC4 > EC.5 > EC3 > EC1 > EC2. Based on the five encounter complexes, five coupling modes are designed for the study of the electron transfer reactivity of this system. The dissociation energy curves at the activated states and the corresponding activation energies of these five coupling modes are obtained and are compared at the B3LYP/6‐311+G(3df) and MP2/6‐311+G* levels. The inapplicability of DFT methods has also been discussed in this article in predicting the energy curves, especially with a long contact distance, in which DFT methods give the abnormal behavior for the dissociations of the complexes caused by the “inverse symmetry breaking” problem. On the basis of the golden rule of the time‐dependent perturbation theory, the electron transfer reactivity and the contact distance dependence of the various electron transfer kinetics parameters (e.g., activation energy, coupling matrix element) have been analyzed at the UMP2(full)/6‐311+G* level. The electron transfer can take place over a range of contact distances, but the most effective coupling distance corresponds to only a small range. The coupling orientation analyses also indicate that the most favorable coupling mode to the electron transfer does not always correspond to the most stable encounter complex mechanism. Some highly energetic coupling modes are more favorable for the electron transfer. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Thermal effects and band spreading in capillary electro-separation

Summary Four Capillary Electroseparation methods are distinguished. All have an ultimate efficiency limited only by axial diffusion and are in principle capable of achieving 10⁶ plates in <1 hour.The main limitation to performance arises from Ohmic heating of the electrolyte. While forced convection at 10ms^–1 is recommended to keep tubes cool, the parabolic temperature profile within the electrolyte limits the tube bore which can be used. A simple limiting expression is derived: (d_c/m)³ (E/kV m^–1)³ (c/mol dm^–3) <3.3×10⁹.Values of constants underlined     

Heating rate effect on the DSC kinetics of oil shales

This research was aimed to investigate the combustion and kinetics of oil shale samples (Mengen and Himmetoğlu) by differential scanning calorimetry (DSC). Experiments were performed in air atmosphere up to 600°C at five different heating rates. The DSC curves clearly demonstrate distinct reaction regions in the oil shale samples studied. Reaction intervals, peak and burn-out temperatures of the oil shale samples are also determined. Arrhenius kinetic method was used to analyze the DSC data and it was observed that the activation energies of the samples are varied in the range of 22.4–127.3 kJ mol⁻¹ depending on the oil shale type and heating rate.     

Structural and physical properties of Mg3−xZnxSb2 (x=0-1.34)

The Mg_3−xZn_xSb₂ phases with x=0-1.34 were prepared by direct reactions of the elements in tantalum tubes. According to the X-ray single crystal and powder diffraction, the Mg_3−xZn_xSb₂ phases crystallize in the same P3¯m1 space group as the parent Mg₃Sb₂ phase. The Mg_3−xZn_xSb₂ structure is different from the other substituted structures of Mg₃Sb₂, such as (Ca, Sr, Ba) Mg₂Sb₂ or Mg_5.23Sm_0.77Sb₄, in a way that in Mg_3−xZn_xSb₂ the Mg atoms on the tetrahedral sites are replaced, while in the other structures Mg on the octahedral sites is replaced. Thermoelectric performance for the two members of the series, Mg₃Sb₂ and Mg_2.36Zn_0.64Sb₂, was evaluated from low to room temperatures through resistivity, Seebeck coefficient and thermal conductivity measurements. In contrast to Mg₃Sb₂ which is a semiconductor, Mg_2.36Zn_0.64Sb₂ is metallic and exhibits an 18-times larger dimensionless figure-of-merit, ZT, at room temperature. However, thermoelectric performance of Mg_2.36Zn_0.64Sb₂ is still poor and it is mostly due to its large electrical resistivity.     

Modeling high-pressure densities at wide temperature range with volume scaling: Cyclohexane + n-hexadecane mixtures

High-pressure density data for cyclohexane + n-hexadecane mixtures at a wide temperature range was modeled with several classical equations of state (EOS) and correlative models. A modification for softening the co-volume and another for a volume scaling of the Peng–Robinson EOS (VS-PR) were proposed. The VS-PR model is able to correlate the pure component experimental data employing only five adjustable parameters, with root-mean-square deviation (RMSD) between calculated and experimental densities essentially within the experimental error. This result is superior to widely used approaches, i.e., a six parameter Tait model and six parameter volume translations (temperature and pressure dependent) for Peng–Robinson and Patel–Teja EOS. The VS-PR model also represents well the isobaric thermal expansion and the isothermal compressibility coefficients of the pure cyclohexane, a small naphthenic substance as well as a long chain n-alkane hydrocarbon, n-hexadecane. When modeling the mixture data, the use of VS-PR model of pure components along with the Redlich–Kister expansion, truncated at the first term, the density was correlated within a RMSD only 60% greater than the experimental error. The proposed model is able to accurately represent all the tested mixture data with a relatively small number of parameters.     

Poly(methyl methacrylate)/silica/titania ternary nanocomposites with greatly improved thermal and ultraviolet-shielding properties

Poly(methyl methacrylate) (PMMA)/silica/titania ternary nanocomposites with covalent bonding interaction between polymer and inorganic phases have been prepared using a novel non-hydrolytic sol-gel method. Transmission electron microscope (TEM) image of silica/titania binary inorganic component indicates a core-shell-like structure. Scanning electron microscope (SEM) images suggest that the well dispersed silica/titania particles in the hybrid are on the nanometer-scale. The transparencies of nanocomposites are maintained in visible region while the absorption band in ultraviolet (UV) region is red shifted with increasing inorganic content. The thermogravimetric analysis (TGA) results show that the thermal stability of PMMA copolymer increases dramatically with the addition of silica/titania moieties both in nitrogen and in air.     

H2CCF自由基与HNCO反应机理的理论研究

采用密度泛函理论的B3LYP方法, 在6-311＋＋G(d,p)基组水平上研究了H₂CCF自由基与HNCO的微观反应机理, 优化了反应过程中的反应物、中间体、过渡态和产物, 为了获得更精确的能量信息, 还在QCISD(T)/6-311＋＋G(d,p)基组水平上计算了各物质的能量．振动分析结果和IRC分析结果证实了中间体和过渡态的真实性, 计算所得的成键临界点电荷密度的变化也确认了反应过程．对于H₂CCF自由基与HNCO反应, 我们找到了六条可行的反应通道, 结果分析表明通道H₂CCF＋HNCO→IM3→TS5→H₂CCFH＋NCO控制步骤活化能最低, 是该反应的主要通道, 在此反应过程中有稳定的氢键复合物IM3生成, 还表现出氢原子迁移的反应特征．     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.