中国散裂中子源RFQ的热分析

射频四级场(RFQ)加速器的水冷具有以下两种功用: 首先它可以把射频场发热带走, 维持RFQ腔的热稳定性及限制RFQ强体形变幅度; 其次, 当RFQ失谐时, 它还可以用来进行RFQ的调谐, 而同时又基本不影响RFQ的射频场分布. 由于RFQ粒子的传输效率对射频场的分布极其敏感, 在RFQ的运行中不再采用传统的用调谐器对RFQ进行调谐的方法. 本文通过热分析, 确定了RFQ加速器的水冷管道的数量和布局及最佳工作水温; 确定了RFQ失谐时, 如何利用水温变化来对RFQ进行调谐的方法.     

Combined implementing the hole-drilling method and reflection hologram interferometry for residual stresses determination in cylindrical shells and tubes

Main features inherent in simplified approach to residual stresses determination in cylindrical shells and tubes, external diameter of which is not less than 60 mm, by combing the hole-drilling method and reflection hologram interferometry are discussed in detail. Initial experimental information in a form of hole diameter increments in principal stress directions is derived from high-quality reflection holograms recorded near cylindrical objects of intermediate curvature value. Converting measured parameters into required stress values is based on the transition model that corresponds to plane stress conditions of pure membrane type. The technique developed is capable of determining residual stress component values within 5% accuracy in an absence of stress gradients over the probe hole diameter when a type of residual stress field corresponds to the transition model adopted. The accuracy analysis involved is based on matrix formulation of conventionally direct problem and an assumption on a pure membrane character of residual stress field under study for thin-walled shell. Required error estimations in a case of inspecting thick-walled cylindrical tube are obtained by combining the above-mentioned approach and an analogy of reconstructed fringe patterns with actual and artificial interferograms, which follow from drilling blind hole of the same geometrical parameters in thick-walled plates. Experimental verification of the developed approach is founded upon a determination of actual stresses in thin-walled cylindrical shell and obtaining residual stress distributions at the proximity of welded joint in thick-walled cylindrical tube.     

Spinning cone water film power meter for high-power CO2 lasers

A laser power meter based on water as an absorbing medium has been developed to measure multi-kilowatt CO₂ laser power with high sensitivity and accuracy. Water absorbs CO₂ laser radiation readily within a very thin layer. Though water has large thermal capacity, due to short absorption length, it could vapourize at high laser powers. In order to circumvent this problem, this power meter has a centre cone and a rapidly spinning water film as the calorimetric medium. The unique feature in this development is the centre cone, which diverges the beam and reduces the power density thus reduces the possibility of vapourization. This minimizes the error in measurements. Due to the rapidly moving fluid film, it exhibits fast response at low as well as high power levels.     

Picosecond stimulated Raman scattering of BaWO4 crystal

In single-pass configuration, a picosecond pulse laser was used to investigate the stimulated Raman scattering in different BaWO₄ crystals. Using the thresholds for the first Stokes line along the a- and c-axis, the Raman gain coefficients of the BaWO₄ crystals were calculated along their respective direction. The higher Stokes (fourth) and anti-Stokes (third) lines were observed. Compared with other well-known Raman crystals, such as KGd(WO₄)₂ and Ba(NO₃)₂, BaWO₄ has favorable properties for scattering the pump radiation with picosecond pulse duration. The Raman gain coefficients of BaWO₄ are different, but do not vary for different transmission directions, which means that this Raman material can be selected more freely.     

超薄LiTaO3晶片的键合减薄技术

在制造红外热释电探测器阵列过程中，需要利用超薄钽酸锂(LiTaO₃)晶片作为红外热释电探测器件的敏感层。通常LiTaO₃晶片的厚度远厚于红外热释电探测器件要求的厚度，所以需要采用键合减薄技术对LiTaO₃晶片进行加工处理。键合减薄技术主要包括：苯并环丁烯（BCB）键合、铣磨、抛光、加热剥离、刻蚀BCB。加工后得到面积为10mm×10mm、厚度为25μm的超薄单晶LiTaO₃薄膜，晶片厚度、表面粗糙度和面形精度比较理想。测得了LT晶片减薄后的热释电系数为1.6×10^-4Cm^-2K^-1。得到的单晶LiTaO₃薄膜满足红外热释电探测器敏感层的要求。     

近化学计量比Ce∶Mn∶LiNbO3晶体光折变性能研究

在LiNbO3中掺进0.015mass%MnCO3和 0.1mass%CeO2,以Czchralski法生长Li/Nb比为1.38的近化学计量比Ce∶Mn∶LiNbO3(Ce∶Mn∶SLN)晶体和Li/Nb比为0.946的同成分Ce∶Mn∶LiNbO3(Ce∶Mn∶CLN)晶体.测试了晶体的红外光谱和紫外可见吸收光谱,讨论了Ce∶Mn∶SLN晶体OH－吸收峰和吸收边移动机理.利用二波耦合光路测试了晶体的指数增益系数,Ce∶Mn∶SLN晶体指数增益系数Γ达到27 cm2－.同时,研究了Ce∶Mn∶SLN指数增益系数提高的机理.     

The fluorescence of polyamidoamine dendrimers peripherally modified with 1,8-naphthalimide groups: Effect of the rare earth ions and protons

We report the absorption spectra, fluorescent spectra and photophysical properties of G 2.0 polyamidoamine dendrimers with peripheral 1,8-naphthalimide groups with the hydrogen ions, the rare earth ions (Er³⁺, Tb³⁺, Nb³⁺, Eu³⁺, Yb³⁺ and Gd³⁺) and the mixture of the rare earth metal and hydrogen ions. The presence of the rare earth ions and hydrogen ions was found to enhance the fluorescence owing to the coordination between the rare earth metal or hydrogen ions and internal amido groups of polyamidoamine (PAMAM) from dendrimer. The result from the 3D isogram of the fluorescence spectra for the dendrimers with peripheral 1,8-naphthalimide groups show that it was obtained for the different emission fluorescence intensity and scope by varying the excitation wavelength and the different rare earth ions as well as its concentration. The results obtained reveal that the capacities of these systems might have acted as a sensitive label agent of the rare earth cations and protons.     

Nonlinear optical side‐chain polymers post‐functionalized with high‐β chromophores exhibiting large electro‐optic property

Electro‐optic side‐chain polymers have been synthesized by the post‐functionalization of methacrylate isocyanate polymers with novel phenyl vinylene thiophene vinylene bridge (FTC) nonlinear optical chromophores. For this application, FTC‐based chromophores were modified in their electronic donor structure, exhibiting much larger molecular hyperpolarizabilities compared with the benchmark FTC. Of these new chromophores, absorption spectra, hyper‐Rayleigh scattering experiment, and thermal analysis were carried out to confirm availability as effective nonlinear optical units for electro‐optic side‐chain polymers. The electro‐optic coefficients (r₃₃) of obtained polymers were investigated in the process of in situ poling by monitoring the temperature, current flow, poling field, and electro‐optic signal. Compared with the nonsubstituted analogue, benxyloxy modified FTC chromophore significantly achieved higher nonlinear optical property, exhibiting molecular hyperpolarizability at 1.9 μm of 4600 × 10^?30 esu and an r₃₃ value of 150 pm/V at the wavelength of 1.31 μm. Synthesized electro‐optic polymers showed high glass transition temperature (T_g), so that the temporal stability examination exhibited >78% of the electro‐optic intensity remaining at 85 °C over 500 h. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Modified wavelet based morphological correlation for rotation-invariant recognition

A wavelet-based rotation invariant morphological correlation (WBRIMC) is proposed as a new architecture to improve the properties of the classical rotation invariant morphological correlation (RIMC). For the WBRIMC, the JPS of the RIMC is filtered by an appropriately dilated power spectrum function of wavelet. Simulation results confirm that the WBRIMC has higher discrimination capability with sharp and intense correlation signals, and is more tolerant to the salt-and-pepper noise and white additive Gaussian noise than is the Circular harmonic filter (CHF), the phase only CHF (POCHF) and the RIMC.