A Noninvasive, on Wafer Method to Determine the Intrinsic Stress of a Polymer Layer

The method described in this paper allows an investigator to determine the intrinsic stress of a polymer layer in a way that does not result in damage to devices or test structures. The method requires that a small area of the polymer be released from the substrate to form a diaphragm. The diaphragm is stimulated with acoustic white noise and the diaphragm movement is monitored with a laser vibrometer. The first few resonance frequencies of the diaphragm are obtained using a laser vibrometer and then those frequencies are used to calculate the membrane intrinsic bi-axial tension.     

NATA: 50 years experience with accreditation

 Laboratory accreditation is becoming increasingly accepted around the world as a means of identifying technically competent laboratories. It is also being used as a mechanism for the acceptance of test data both nationally and internationally. The concept and mechanisms of accreditation have been developed over the past 50 years. The first national laboratory accreditation system appeared in Australia in 1947. This organisation, known as the National Association of Testing Authorities (NATA), has since taken a leading role in developing accreditation practices that are now used world-wide in evaluating testing, measurement and calibration laboratories. This paper examines the development of the world's first and largest laboratory accreditation system, and looks at the difficulties and triumphs in gaining acceptance and recognition by government and industry of the benefits of laboratory accreditation. Received: 24 June 1996 Accepted: 25 June 1996     

Controlling the quality of testing

 This article mainly focuses on the testing of products, materials, etc., but the general principles are applicable in a broader perspective. Quality of testing should be judged based on fitness for purpose. This judgement includes both objective and subjective elements. The possibility to make decisions and other professional judgements based on test results alone is discussed and compared with the decisions and judgements being made through the certification and inspection process. Quality, including the uncertainty of the test results, depends on many factors, and in order to make necessary improvements in the testing procedures based on the customers' needs, the right issues should be addressed. The question arises as to whether, in laboratories' quality systems and in the accreditation and certification process, attention is really paid to those factors that are crucial to obtaining reliable results.     

基于单神经元PID控制器的压电陶瓷控制方法

卫星地面综合测试是卫星研制过程中的重要环节,对系统功能验证及性能评估具有重要作用。传统的卫星地面综合测试系统存在研制周期长、投入较大、自动化流程不够完整、可重用性较差等不足。而北斗导航卫星地面综合测试系统采用分布式、高实时性、可配置、多主机的集成体系结构,是集计算机通讯、实时控制、实时数据处理、事后分析等功能于一体的测试系统,适用于从卫星总装集成到发射各个阶段的电气测试。通过卫星系统级的各项接口、功能、性能指标测试,表明该系统满足支持系统论证、状态确认、问题排查等测试需求,有力支撑了北斗导航卫星的成功发射和在轨运行。     

新型对开门高低温动态试验箱研制

介绍了新型对开门高低温动态试验箱的研制过程,包括系统热负荷计算、复叠制冷循环系统的热力计算等。并根据系统的热力计算,进行了冷凝器和蒸发器的结构设计以及主要部件压缩机和通风机的设计选型。     

星上电缆自动导通绝缘测试仪的设计与开发

星上电缆在航天器系统工程中起到了传递能量和信息的关键作用,并且其上天后具有不可修复性,这就决定了它在电性能检测方面必须做到高质量与高可靠。本文针对传统人工方式进行导通绝缘测试时工作强度大、检测效率低下和可信度低等缺点,设计并开发了一种星上电缆自动导通绝缘测试仪。该仪器基于模块化设计的思想采用中央控制器对各个模块单元进行控制来分别实现测试通道自动切换、测试电压的供给、星上电缆导通绝缘电阻的数据采集、通讯、存储和显示。实践结果表明,星上电缆自动导通绝缘测试仪一方面可以提高电缆导通绝缘测试的可靠性,增强质量控制;另一方面,可以提高效率,节省生产周期,降低劳动强度。     

基于混合密度网络模型拟合收益统计分布与计算Expected Shortfall

基于混合密度网络模型估计金融时间序列的时变条件密件,提出数值模拟方法计算ExpectedShortfall。对香港恒生指数的实证研究表明,混合密度网络可以有效地描述收益的经验分布统计特征和波动规律,模型评估指标反映出预测效果良好,Value-at-R isk的预测精度在高端分位点表现较好,且可有效计算Expected shortfall指标,是金融市场风险测量的有效方法。     

基于超声波和云测试的油井液面测试系统研究

针对目前油井液面深度测试系统测量范围小、误差大、稳定性低的缺点,提出了基于声波法测动液面原理,利用时间序列分析技术、新息自适应卡尔曼滤波技术来实时检测回波信号,进而实现对油井液面深度的高精度测量和噪声处理;选用FPGA和云测试技术成功实现了油井液面深度测量系统的远程化和网络化。基于云测试的油井液面远程监测系统目前已在油田生产现场通过测试,测试结果表明,系统稳定,算法实时、高效,动液面深度测量误差小,测量精度高,能满足实际工程应用。     

The impact of human activity patterns on asymptomatic infectious processes in complex networks

The study of the impact of human activity patterns on network dynamics has attracted a lot of attention in recent years. However, individuals’ knowledge of their own physical states has rarely been incorporated into modeling processes. In real life, for certain infectious processes, infected agents may not have any visible or physical signs and symptoms; therefore, they may believe that they are uninfected even when they have been infected asymptomatically. This infection awareness factor is covered neither in the classical epidemic models such as SIS nor in network propagation studies. In this article, we propose a novel infectious process model that differentiates between the infection awareness states and the physical states of individuals and extend the SIS model to deal with both asymptomatic infection characteristics and human activity patterns. With regards to the latter, we focus particularly on individuals’ testing action, which is to determine whether an individual is infected by an epidemic. The simulation results show that less effort is required in controlling the disease when the transmission probability is either very small or large enough and that Poisson activity patterns are more effective than heavy-tailed patterns in controlling and eliminating asymptomatic infectious diseases due to the long-tail characteristic.     

Can the new ISO Guide 25/EN 45001 create better confidence in laboratory operations?

 Confidence in laboratory operations is discussed based on the ongoing revision of the ISO/IEC Guide 25. Confidence is a subjective attribute, which also depends on whose interest is considered. New and better-defined quality systems and technical elements will be included, and these are beneficial to the transparency of laboratory operations, as well as to the accreditation process. The ultimate aim is, of course, to satisfy customers. The testing laboratories' industrial customers are, however, generally unfamiliar with the ISO/IEC Guide 25 and accreditation. The main reason for improved confidence in testing and calibration laboratories is foreseen to come from closer interaction between laboratories and their customers.