具有突变结构开放腔的矩阵分析

利用模式展开与场匹配原理，建立了突变波导的散射矩阵(S参数矩阵)，在此基础上分析研究了具有突变结构的波导开放式谐振腔，并由矩阵级联建立了开放腔总的S参数矩阵.通过Matlab编制计算程序对具有多级突变结构的开放式输出腔进行了数值计算和分析，并通过与实验数据和软件模拟的结果比较对该方法得到的数据结果进行了验证. 关键词： 回旋管 开放式谐振腔 突变结构 S参数矩阵     

Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

Spatiotemporal model for the progression of transgressive dunes

Transgressive dune fields, which are active sand areas surrounded by vegetation, exist on many coasts. In some regions like in Fraser Island in Australia, small dunes shrink while large ones grow, although both experience the same climatic conditions. We propose a general mathematical model for the spatiotemporal dynamics of vegetation cover on sand dunes and focus on the dynamics of transgressive dunes. Among other possibilities, the model predicts growth parallel to the wind with shrinkage perpendicular to the wind, where, depending on geometry and size, a transgressive dune can initially grow although eventually shrink. The larger is the initial area the slower its stabilization process. The model’s predictions are supported by field observations from Fraser Island in Australia.     

Molecular dynamics simulation of the interaction between a mixed dislocation and a stacking fault tetrahedron

A high number-density of nanometer-sized stacking fault tetrahedra are commonly found during irradiation of low stacking fault energy metals. The stacking fault tetrahedra act as obstacles to dislocation motion leading to increased yield strength and decreased ductility. Thus, an improved understanding of the interaction between gliding dislocations and stacking fault tetrahedra are critical to reliably predict the mechanical properties of irradiated materials. Many studies have investigated the interaction of a screw or edge dislocation with a stacking fault tetrahedron (SFT). However, atomistic studies of a mixed dislocation interaction with an SFT are not available, even though mixed dislocations are the most common. In this paper, molecular dynamics simulation results of the interaction between a mixed dislocation and an SFT in face-centered cubic copper are presented. The interaction results in shearing, partial absorption, destabilization or simple bypass of the SFT, depending on the interaction geometry. However, the SFT was not completely annihilated, absorbed or collapsed during a single interaction with a mixed dislocation. These observations, combined with simulation results of edge or screw dislocations, suggest that defect-free channel formation in irradiated copper is not likely by a single dislocation sweeping or destruction process, but rather by a complex mix of multiple shearing, partial absorption and defect cluster transportation that ultimately reduces the size of stacking fault tetrahedra within a localized region.     

Phase diagram of aqueous solution at high pressure and low temperature

Abstract

This paper presents a constant mass high pressure isothermal calorimeter and describes the range of applications that this type of equipment can deal with. As an example, the thermophysical properties of an aqueous solution of MgSO₄ at low temperature and at high pressure have been investigated. The main results showed that the phase change heat of the solution decreased with increasing pressure and the phase change temperature of the eutectic concentration was depressed under high pressure. Those changes could be related to the MgSO₄ solubility and to water latent heat changes.     

Room temperature magnetocaloric effect in Pr1.75Sr1.25Mn2O7 double-layered perovskite manganite system

Abstract

In this work, we have studied on double-layered perovskite (Ruddlesden–Popper) manganite structure in Pr_1.75Sr_1.25Mn₂O₇ synthesised by sol–gel method. The crystal structure of the double-layered perovskite is found as tetragonal from the X-ray diffraction analysis with I4/mmm space group. A high Curie temperature, T_C = 305 K is observed from the temperature dependence of magnetisation measurement. The isothermal magnetisation curves showed that magnetic phase transition is second order due to the positive slope of the Arrott plots. Maximum magnetic entropy change (ΔS_M) and adiabatic temperature change (ΔT_ad) values are calculated as 3.99 J kg^?1 K^?1 and 2.1 K under external magnetic field of 70 kOe, respectively. Since our double-layered perovskite manganite sample has desired T_C value and relatively high ΔS_M, it can be a potential candidate as a magnetocaloric material for room temperature magnetic cooling systems.     

Existence of a Weak Solution for the Phase Change Problem with Joule's Heating

A phase change problem with Joule's heat ing describes tbe processes of electric heating in a conducting material. It is modeled as a coupled system of nonlinear partial differential equations with quadratic growth in the gradient. We establish the existence of a weak solution for the problem in two dimensions.     

超短激光打孔中快速相变的格子玻尔兹曼模拟

采用双重分布函数的格子玻尔兹曼模型，对单脉冲激光金属打孔过程中的快速相变传热进行研究.模型考虑了金属材料熔化后熔体的流动换热，并采用浸没移动边界方案对过程中的固液界面进行追踪.采用纯导热模型和考虑对流的换热模型计算，将结果和试验进行对比，结果表明：在激光打孔过程中熔体的流动对相变传热产生较大影响，采用考虑流动换热模型的结果与实验更接近.进而对熔化速度、熔化深度以及温度场的变化进行分析，并探讨不同激光工艺参数对相变过程的影响.模拟发现一个脉冲结束后，激光的脉宽越大，孔深越小，孔径越大，且最高温度较短脉冲激光越低.     

用浓度调制光谱法测量水汽辉光放电中OH和H2O的布居数变化

本文使用波长为2.8 μm的分布式反馈激光器来测量水汽辉光放电产生的物种. 使用浓度调制光谱仅观察到OH自由基和瞬态H₂O分子的吸收光谱. 吸收峰的强度和方向随解调相位而变化,但是H₂O的一个吸收峰的方向始终与其它峰相反. OH和H₂O的不同光谱取向反映了能级中粒子数量的增加或减少. 如果在放电过程中可以检测到更多的瞬态物种,则可以更好地研究H₂O的激发、电离和分解动力学. 研究表明,浓度调制光谱的解调相位关系可以用来研究分子能级的布居数变化.