铝硫二元团簇的组分及其光解规律

硫与金属元素所形成的二元团簇具有很多重要的特性,已受到人们的普遍重视.用激光-串级飞行时间质谱仪,我们曾研究了硫与过渡金属钽、铁等的二元团簇.最近我们选取主族金属元素铝,研究了铝硫团簇的形成及其光解,实验结果表明,与钽硫或铁硫团簇相比,铝硫团簇无论在其组份构成还是在其光解方面,都表现出鲜明的特有规律性.实验的主要参数如下:溅射用激光为Nd:YAG 二倍频,其输出强度控制在约10~7W·cm~(-2),激光的重复频率10Hz 样品位于激光束的焦点附近,由焦距f=50cm 的透镜调整其聚焦状     

Deep‐ultraviolet laser ablation electrospray ionization mass spectrometry

A 193‐nm wavelength deep ultraviolet laser was used for ambient laser ablation electrospray ionization mass spectrometry of biological samples. A pulsed ArF excimer laser was used to ablate solid samples, and the resulting plume of the desorbed material merged with charged electrospray droplets to form ions that were detected with a quadrupole time‐of‐flight mass spectrometer. Solutions containing peptide and protein standards up to 66‐kDa molecular weight were deposited on a metal target, dried, and analyzed. No fragmentation was observed from peptides and proteins as well as from the more easily fragmented vitamin B₁₂ molecule. The mass spectra contained peaks from multiply charged ions that were identical to conventional electrospray. Deep UV laser ablation of tissue allowed detection of lipids from untreated tissue. The mechanism of ionization is postulated to involve absorption of laser energy by a fraction of the analyte molecules that act as a sacrificial matrix or by residual water in the sample.     

金纳米花介导的近红外热疗对人喉癌Hep-2细胞增殖的抑制作用

采用弱配体柠檬酸钠修饰的金纳米花为介导材料,考察了其对人喉癌Hep-2细胞的NIR热疗作用,结果表明,这种金纳米花材料具有良好的NIR光热转换性能,可有效抑制Hep-2细胞增殖.     

激光剥蚀电感耦合等离子体质谱微区分析新进展

从仪器、基础研究诸方面评述近年来LA-ICP-MS微区分析进展,重点介绍了与ICP-MS联用的激光技术发展、校正方法、分馏效应、剥蚀颗粒分布研究及仪器装置与实验技术与改进,对LA-ICP-MS技术的应用作了回顾与展望。     

激光烧蚀下不同颗粒度Al-teflon的反应行为

为研究不同颗粒度对Al-teflon反应行为的影响,以颗粒度25μm、1μm和20～200 nm的Al粉和微米级Teflon粉混合制备的反应材料为研究对象,基于脉冲激光烧蚀实验,结合ICCD相机和光谱仪对反应过程中的自发光成像和发射光谱进行瞬态观测。研究结果表明,Al-teflon反应材料在激光烧蚀下的反应行为体现出典型的二次反应特征,具有持续燃烧特征和明显的后燃效应,也具有较长的能量释放时间;同时,其反应行为与Al粉颗粒度密切相关:初始阶段,反应随Al粉颗粒度的降低加剧,随着反应的进行,纳米级Al粉对应的反应材料后续反应能力逐渐下降,反应强度和反应时间都小于1μm铝粉对应的反应材料。     

Synthesis of cation-exchanged laponite suspensions by laser ablation of microsized-metal particles in liquid

Laser ablation in the liquid technique has been used to synthesize cation-exchanged laponite suspensions. In summary, laser ablation of the microsize-metal powder (Co, Al, and Cu) dispersed in an aqueous solution containing deionized water laponite crystals was carried out using laser beam generated by a single-mode, Q-switched Nd-Yag laser operating at 532 nm with a pulse duration of 5.5 ns and 10 Hz repetition rate. Laser fluence was 0.265 J/cm² for all tests. For all samples, the mass fraction of laponite was 1%. General observations of the prepared samples indicated that an aqueous suspension of 1 wt% laponite retained its free flowing liquid phase characteristics even after aging for several weeks. When bivalent cationic metals (Cu, Co, Al) were ablated in it for about 1 h, even with a small amount of the metal (0.025% and 0.050%) were generated, the suspension became highly viscous and behaved as a shear-thinning and thixotropic material. That is, the suspension gelled strongly when it was allowed to rest. The gels, however, could easily be reverted to a low viscosity liquid with simple shaking. Information from TEM and XRD analysis indicated that such a sol-gel transformation might be due to the charge exchange between the cationic species produced during the laser ablation and the sodium ions in the interlayers of the clay sheets.     

飞秒激光烧蚀LiNbO3晶体的形貌特征与机理研究

采用了不同能量的单脉冲和多脉冲飞秒激光对LiNbO₃晶体进行烧蚀，并刻蚀了表面衍射型光栅.通过扫描电镜和原子力显微镜观察了烧蚀点的形貌特征，首次发现利用单束飞秒激光脉冲对LiNbO₃晶体烧蚀，可以得到超衍射极限的烧蚀点，当聚焦光斑直径约为2μm、能量为170nJ的单脉冲飞秒激光作用时，烧蚀点的直径约为400nm，100nJ，17个脉冲作用时烧蚀点的直径约为800nm.同时可以观察到在能量较低的多脉冲飞秒激光作用下， LiNbO₃晶体呈现出大约200nm周期性分布的波纹状结构.实验结果表明，选择合适参数的飞秒激光脉冲可以对LiNbO₃晶体进行超衍射极限加工，这对于利用飞秒激光制作LiNbO₃基质的微纳光电子器件有十分重要的意义.     

Experimental study of infrared nanosecond laser ablation of silicon: The multi-pulse enhancement effect

Experimental study has been performed on nanosecond (ns) laser ablation of silicon at 1064 nm, through which a so-called “multi-pulse enhancement effect” has been revealed, which has been rarely reported in literature. The major features of this effect are: (1) for multi-pulse laser ablation at the same spatial location, the ablation efficiency increases as the pulse number increases and the pulse-to-pulse temporal distance decreases; (2) for multi-pulse ablation performed sequentially at a group of locations, the ablation quality and efficiency starting from the second location can be significantly enhanced if the distance between adjacent locations is sufficiently small. Further study is needed to confirm and understand the underlying physical mechanism for the multi-pulse enhancement effect, which can be utilized to significantly improve the quality and efficiency of laser silicon micromachining using the low-cost and low-energy-consumption infrared ns lasers. This may decrease the cost and energy consumption of many relevant areas, such as the solar cell industry.     

Interaction of Short Laser Pulses in Wavelength Range from Infrared to X‐ray with Metals,Semiconductors, and Dielectrics

Laser‐matter interaction is defined by an electronic band structure of condensed matter and frequency ω_L of electromagnetic radiation. In the range of moderate fluences, the energy absorbed by electrons from radiation finally thermalizes in the ion thermal energy. The thermalization processes are different for optical as compared with X‐ray quanta and for metals relative to semiconductors and dielectrics, since the light absorption and electron‐electron, electron‐ion dynamics are sensitive to the electron population in a conduction band and the width of a forbidden gap. Although the thermalization processes are different, the final state is simply a heated matter. Laser heating creates powerful stresses in a target if duration of a laser pulse τ_L is short in acoustic time scale. Nucleation and material removal take place under such stresses. Such way of removal is called here the spallative ablation. Thus the spallative ablation is an ablation mechanism universally important for qualitatively different materials and quanta (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Crystal Phases of TiO2 Ultrafine Particles Prepared by Laser Ablation of Solid Rods

Titanium dioxide ultrafine particles (UFPs) are produced by pulsed laser ablation of titanium or titanium dioxide (anatase and rutile) rods in an atmosphere of He or O₂/He mixture. The collected UFPs on cellulose membrane filters at the exit of the ablation chamber are analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The TiO₂ particles produced are composed of very small particles (diameter: 10–50nm) that are completely anatase, irrespective of the rod material, and relatively large particles (diameter: 100nm–1m) that are a mixture of anatase and rutile. The large particles consist of the direct strip-off fragments coming from the rod surface. The particles obtained from the laser ablation on TiO₂ rods in an atmosphere of He contains gray particles that are supposed to be amorphous TiO₂ (x < 2). In the presence of O₂ in the ablation chamber, these oxygen defects in amorphous TiO₂ are stabilized and anatase UFPs are formed. These results suggest that the crystal phase of the products can be controlled by adjusting the rod material and the gases used in the ablation process.