Measurement of Solid-gas Two-phase Flow using Optical Fiber Sensor

ＭｅａｓｕｒｅｍｅｎｔｏｆＳｏｌｉｄ┐ｇａｓＴｗｏ┐ｐｈａｓｅＦｌｏｗｕｓｉｎｇＯｐｔｉｃａｌＦｉｂｅｒＳｅｎｓｏｒＦＡＮＨｕａＣＨＥＮＹｕａｎｄｉＴＡＮＹｕｓｈａｎ（ＩｎｓｔｉｔｕｔｅｏｆＬａｓｅｒ＆ＩｎｆｒａｒｅｄＡｐｐｌｉｃａｔｉｏｎｓｉｎＸｉ...     

Temperature evolution associated with dynamic phase transformation in shape-memory TiNi alloys

In this paper, temperature evolution in shape-memory TiNi alloys was in situ measured in the process of phase transition under shock loading tests. It was shown that the temperature increased during loading, while unloading, it would keep the maximum value constant or decreased, depending on the strain rate. The corresponding dynamic response indicated that the hardening property is related to phase transition strain and the transformation path has remarkable strain-rate effect. The reason for this phenomenon is essentially due to the temperature dependence of the phase transformation stress. Moreover, the evolution of temperature was consistent with the change of stress, suggesting that this dynamic phase transition deformation is uniform. The theoretical calculation shows that the mechanism of temperature evolution results from the release of latent heat and the hysteresis dissipated energy. The results of this investigation provide insight into intriguing strain-rate-dependent phenomena intrinsic of TiNi alloys.     

H2-broadening coefficients in the ν3 band of CH3D at low temperatures

Using a diode-laser spectrometer, we have measured H₂-broadening coefficients of CH₃D at low temperatures (153.5, 183.5, and 223.5 K) for four lines in the ν₃ band. The collisional widths are obtained by fitting each absorption line with three lineshape models: the Voigt, Rautian, and Galatry profiles. The broadening coefficients are also calculated on the basis of a semiclassical model of interacting linear molecules by considering an atom-atom Lennard-Jones potential in addition to electrostatic contributions. By comparing the broadening coefficients at room and low temperatures the temperature dependence of these broadenings has been determined both experimentally and theoretically.     

Gas sensing properties of nanostructured MoO3 thin films prepared by spray pyrolysis

Thin films of molybdenum trioxide (MoO₃) were deposited on common glass using the chemical spray pyrolysis technique. A (NH₄)₆Mo₇O₂₄4H₂0 solution 0.1 M was used as the precursor one. The influence of substrate temperature on the crystallographic structure, surface morphology and electrical behavior of MoO₃ thin films was studied. MoO₃ can exist in two crystalline forms, the thermodynamically stable orthorhombic α-MoO₃ and the metastable monoclinic β-MoO₃ phase. XRD-spectra showed a growth of α-MoO₃ phase percentage as substrate temperature increases from 420 K up to 670 K. Films deposited in the 500–600 K range have a clearly porous surface structure of nanometer order as can be seen in SEM images. Changes up to six magnitude orders were observed in MoO₃ thin films electrical resistance when films temperature varied from 100 K up to 500 K. The sensing property of these MoO₃ films was also studied. The sensitivity was investigated in the temperature range 160 and 360 K for H₂O and CO gases, respectively. Both of them are of reducing nature. In all studied cases sensitivity decreases slowly as film temperature is raised. At room temperature the sensitivity changes from 12 up to 75% depending on substrate temperature. The sensitivity for CO gas was found to be lower than that of H₂O.     

9.7GHz高频窄带高温超导滤波器设计

本文设计了一种高频窄带高温超导微带滤波器,使用Sapphire基片上的双面YBCO高温超导薄膜,中心频率约为9.7GHz,相对带宽约为1.2%.电磁分析软件Sonnet的设计结果表明,滤波器带外抑制超过90dB,带内波纹小于0.12dB,基片尺寸为32.74mm×8.72mm.     

AlInGaN 310 nm ultraviolet metal-insulator-semiconductor sensors with photo-chemical-vapor-deposition SiO2 cap layers

Al_0.25In_0.04Ga_0.71N 310 nm near solar blind ultraviolet (UV) metal-insulator-semiconductor (MIS) sensors with different SiO₂ cap layer thickness were successfully fabricated. With appropriate SiO₂ layer thickness, the dark current of AlInGaN sensors was notably suppressed from 1.88 × 10⁻⁶ to 1.91 × 10⁻⁹ A, and the photo-generated carriers still could reach the electrodes by tunneling through the thin SiO₂ layer under the illumination. It could be clearly seen that cut-off occurred at around 300/310 nm while the responses above the bandgap were flat.     

Planar Hall effect in biosensor with a tilted angle of the cross-junction

A typical planar Hall effect (PHE) sensor junction consists of two Hall bars that the bars appear normal to each other and the junction can have the required four terminals for current and voltage measurements. We are now introducing a tilted angle of the cross-junction and studying the role of the PHE therein. The results show that although there is a tilted angle of the cross-junction, the PHE voltage is remained constant. The result is interpreted by assuming the sensor material with the behavior of a basic single domain structure under the external magnetic field reversals. The calculations of the model are found to be in good concurrence with the experimental results.     

Lifetime maximization in wireless directional sensor network

This paper addresses two versions of a lifetime maximization problem for target coverage with wireless directional sensor networks. The sensors used in these networks have a maximum sensing range and a limited sensing angle. In the first problem version, predefined sensing directions are assumed to be given, whereas sensing directions can be freely devised in the second problem version. In that case, a polynomial-time algorithm is provided for building sensing directions that allow to maximize the network lifetime. A column generation algorithm is proposed for both problem versions, the subproblem being addressed with a hybrid approach based on a genetic algorithm, and an integer linear programming formulation. Numerical results show that addressing the second problem version allows for significant improvements in terms of network lifetime while the computational effort is comparable for both problem versions.     

High-resolution liquid refractive-index sensor using reflective arrayed-waveguide grating

A high-resolution sensor for measuring the refractive index of liquids using a reflective arrayed-waveguide grating (AWG) is proposed. The refractive index of a liquid placed in the groove of the arrayed region is measured via the shift of the maximum intensity in the imaging plane of the AWG owing to the phase change in the region. The refractive index can be monitored in real time by measuring the power ratio between two output waveguides of the AWG with a narrow-band source. A mathematical model based on Fourier optics and wave optics is established. A fitting formula for the relationship between the power ratio and the refractive index of liquid is derived. The results of the study show that the proposed method can eliminate the effects of instability of the light source and the inner loss of the system and provide a refractive index resolution of 10⁻⁷.     

Cysteine combined with carbon black as support for electrodeposition of poly (1,8-Diaminonaphthalene): Application as sensing material for efficient determination of nitrite ions

Poly 1,8-Diaminonaphtahlene/cysteine (poly 1,8-DAN/Cys) combined with carbon black (CB) nanoparticles are proposed as an excellent sensor for the detection of nitrite ions. To design the electrocatalyst, a simple approach consisting on drop-casting method was applied to disperse carbon black on the surface of glassy carbon electrode, followed by the immobilization of cysteine on the surface of CB nanoparticles. The electrochemical polymerization of 1,8-Diaminonaphthalene was conducted in acidic medium by using cyclic voltammetry. The prepared hybrid material was denoted poly 1,8-DAN /Cys/CB. Several methods were used to characterize the structural and electrochemical behavior of the reported hybrid material including Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), amperometry and differential pulse voltammetry (DPV). The prepared electrode displayed an outstanding electroactivity towards nitrite ions reflected by an enhancement in the intensity of the current and a decrease of the charge transfer resistance. Poly 1,8-DAN/Cys/CB displayed an excellent sensing performance towards the detection of nitrite with a very low detection limit of 0.25 µM. Two linear ranges of 1–40 µM and 20–210 µM when using amperometry and differential pulse voltammetry (DPV) were obtained respectively. This work highlights the simple preparation of a polymeric film rich in amine and thiol groups for nitrite detection.