C12-s-C12·2Br与低碳醇混合水溶液胶团化行为的温度效应和焓/熵补偿

季铵盐Gemini表面活性剂C12-s-C12·2Br(s=2,3,4,6)与丙醇、丁醇、戊醇、己醇混合水溶液的In(cmc)随温度升高而逐渐增大.计算所得热力学数据表明,C12-s-C12·2Br与醇混合胶团化过程服从熵驱动机理,也出现了焓/熵补偿现象.随着温度上升,熵驱动力增大,在指定温度时,醇分子烷烃链上碳原子数n增大使△Gm0值减小,胶团结构更加稳定;而增加s使值增大,胶团稳定性下降.     

Evidences for temperature-dependent mechanism of host-guest complexation

Summary High-performance liquid chromatography and ultraviolet spectroscopy methods were applied to the studies on the influence of temperature on the complexation of β-cyclodextrin with naphthalene and its derivatives. The strong nonlinearity of Van't Hoff plots suggests, that the retention mechanism of hydrocarbons investigated might be different in high and low temperature region. The total lack of correlation (r=−0.230) between chromatographic data (capacity factors ratio:k _PAH/k _PAH×CD) and spectrophotometric data (ΔA) at high temperature (60°) as well as a significant correlation (r=0.922) at subambient temperature (15°C) suggest, that the inclusion mechanism starts to be important at low temperature region and the predominant mechanism for chromatographic retention is the formation of an inclusion complexes in the mobile phase.     

Phase Transitions,Thermal Desorption of Gases,and Electroconduction in BaCeO<Subscript>3</Subscript>, a Base for High-Temperature Protonic Conductors

Investigations of phase transitions in barium cerate are carried out by methods of dilatometry and differential scanning calorimetry. Thermal desorption of gases and temperature dependences of electroconduction in dry and humid air are studied. Barium cerate exhibits complex polymorphism, undergoing a number of structural conversions at 300– 1300 K. The peaks in the spectra of thermal desorption of CO₂ and H₂O correlate with variations in the crystal lattice. Structural changes in BaCeO₃ affect activation energies for the carrier transport and the shares of partial conductivities.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 620–626.Original Russian Text Copyright © 2005 by Kuz’min, Gorelov, Vaganov, Korzun, Kazantsev, Aksenova, Khromushin.     

氮化铁催化剂的制备及其苯胺催化加氢性能

用α－Ｆｅ２Ｏ３与氨气程序升温还原方法制备出不同温度氮气的氮化铁系列催化剂。通过ＸＲＤ测试对氮化过程中的晶相转变进行了分析。在中压反应装置上考察了氮化铁系列催化剂上苯胺加氢活性以及反应条件对苯胺加氢反应活性的影响。结果表明，在７００℃氮化制香的氮化铁催化剂显示有较高的苯胺加氢活性，在氢压为３．０ＭＰａ，温度为２５０℃，ｎ（Ｈ２）／ｎ（ｏｉｌ）＝１８，液体空速（ＷＨＳＶ）为０．３ｈ＾－１时，该催化剂     

Theory of reflectance measurements in quantitative evaluation in TLC and HPTLC. 1. Multilayer model of reflectance and transmittance

In the approach described in this paper, the layer of adsorbent is divided into n sublayers. The radiation density in each sublayer is given by the sum of the transmittance and the reflectance of the adjacent sublayers. Absorption of light by the layer or the substance will diminish this radiation density. Depending upon the factors of reflectance and transmittance some light will pass to the adjacent sublayers. Two polynomials are derived from this readily understood formulation to calculate the reflectance or the transmittance of a layer of finite thickness. The algorithms given describe the reflectance and transmittance encountered in practical measurements with large amounts of substance per spot, as well as with small amounts. There are no restrictions with respect to nonideal scattering or reflection by the adsorbent layer support.     

用TREF方法分离聚烯烃共混物

用ＴＲＥＦ方法分离聚烯烃共混物徐君庭，封麟先，杨士林（浙江大学高分子科学与工程学系，杭州，３１００２７）关键词升温淋洗分级，聚烯烃，共混物升温淋洗分级（ＴＲＥＦ）方法是８０年代发展起来的，它按结晶度将聚合物分级［１］，目前主要用于聚烯烃的分级［２，３...     

Specific surface of two hydrated cements differing in strength

Specific surface, S, of CSH-gel particles of disordered layered structure, was studied by water sorption/retention in two cement pastes differing in strength, i.e. C-33 (weaker) and C-43 (stronger), w/c=0.4. Hydration time in liquid phase was t _h=1 and 6 months, followed by hydration in water vapour either on increasing stepwise the relative humidity, RH=0.5→0.95→1.0 (WS) or on its lowering in an inverse order (WR). Specific surface was estimated from evaporable (sorbed) water content, EV (110°C), assuming a bi- and three-molecular sorbed water layer at RH=0.5 or 0.95, respectively (WS). On WR it was three- and three- to four-molecular (50 to 75%), respectively, causing a hysteresis of sorption isotherm. At RH=0.5 the S increased with cement strength from 146 m² g^-1 (C-33, 1 m) to 166 m² g^-1 (C-43, 1 m) and with hydration time to 163 (C-33, 6 m) and to 204 m² g^-1 (C-43, 6 m). At RH=1.0 (and 0.95), higher S-value were measured but these differences were smaller: S amounted to 190-200 m² g^-1 in C-33 (1 and 6 m) and 198-210 m² g-1 in C-43 (1 and 6 m). Thus no collapse occurred on air drying of paste C-43 (6 m). This revised version was published online in July 2006 with corrections to the Cover Date.     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

An efficient ab initio gradient program

An ab initio Hartree-Fock gradient program is described. It is characterized by (1) efficiency of the gradient evaluation, and (2) capability of handling higher angular momentum (d andf) basis functions. The latter are constructed from shifted Cartesian Gaussian p-type primitives. A satisfactory solution is presented for the problems connected with the neglect of small integrals in a gradient program. Methods for increasing the efficiency of the SCF procedure are discussed.     

乙醇在杂多酸上的氧化、脱水和程序升温脱附研究

合成了两个系列具有Keggin结构的12-钒钼磷酸和钨钼磷酸,研究了它们对乙醇氧化、脱水的催化反应。借助程序升温脱附技术研究了反应物及产物乙醇、乙烯、乙醚等在样品上的程脱作用。讨论了钨、钒取代部分钼原于后对杂多酸酸性及氧化性能的影响。