An inverse radiative transfer problem of simultaneously estimating profiles of temperature and radiative parameters from boundary intensity and temperature measurements

A parallel-plane space filled with absorbing, emitting, isotropically scattering, gray medium is studied in this paper. The boundary intensity and boundary temperature profiles are calculated for the inverse analysis. For the simultaneous estimation of temperature, absorption and scattering coefficient profiles in the medium, the sum of residuals of boundary intensity and temperature after being weighted by a balance factor is minimized through using a Newton-type iteration algorithm and the least-squares method. To avoid over-updating for the parameters, the relative updating magnitude during the iteration process is constrained not to be >0.5. It is shown that the boundary intensity measurement alone is not enough to estimate simultaneously the temperature (source) and the radiative properties (both absorption and scattering coefficients) when the measurement data contain sensitive random errors. The boundary temperature measurement can serve as a necessary supplementation to the boundary intensity to make this kind of inverse radiative transfer problem resolvable. It was shown that a compensation relationship between absorption and scattering coefficients makes it difficult to fix them accurately. Parabolic profiles for the three parameters are used to validate the estimation method. When the optical thickness approaches 4.0, the results for the radiative properties are not acceptable, although the result for temperature profile is reasonable. This means the method needs further improvements.     

Au deposits on graphite: On the nature of high temperature desorption peaks in CO thermal desorption spectra

Due to the discovery of Au as a catalyst for low temperature CO oxidation, the adsorption of CO on Au surfaces has attracted a lot of attention recently. On stepped and rough single crystal surfaces as well as on deposited particles two characteristic desorption states above 100 K have been observed via TPD. We have studied Au deposits on graphite in order to elucidate the nature of these desorption peaks in more detail. For this purpose, Au was deposited at 100 K and 300 K on HOPG as a weakly interacting support. In analogy to other supports, we obtain two desorption states (∼140 K and ∼170 K) whose relative intensities depend strongly on the deposition temperature with the high temperature peak being much more pronounced for the 100 K deposits. After annealing to 600 K, both states drastically lose intensity. XP spectra, on the other hand, show virtually no decrease of the Au 4f intensity as would be expected for desorption or significant changes of the particle morphologies. We conclude that both desorption peaks are defect-related and connected with under-coordinated Au atoms that are lost for the most part upon annealing. These sites could be located at the perimeter of dendritic islands or on small, defect-rich particles in addition to larger particles not adsorbing CO at 100 K. Preliminary STM results are in favour of the second interpretation.     

Determination of a control parameter in a one-dimensional parabolic equation using the method of radial basis functions

In this work, the method of radial basis functions is used for finding the solution of an inverse problem with source control parameter. Because a much wider range of physical phenomena are modelled by nonclassical parabolic initial-boundary value problems, theoretical behavior and numerical approximation of these problems have been active areas of research. The radial basis functions (RBF) method is an efficient mesh free technique for the numerical solution of partial differential equations. The main advantage of numerical methods which use radial basis functions over traditional techniques is the meshless property of these methods. In a meshless method, a set of scattered nodes are used instead of meshing the domain of the problem. The results of numerical experiments are presented and some comparisons are made with several well-known finite difference schemes.     

分辨率为1pm的波长监测新方法

在亚毫米尺度金属包覆波导研究基础上，提出了一种波长监测的新方法.实验采用自由空间耦合技术，激发了波导中对波长变化十分灵敏的超高阶导模，并以此为探针，实现了1pm波长漂移的监测. 关键词： 波长监测 金属包覆波导 超高阶导模     

Progress in the quality assurance of environmental trace organic analysis

An overview is given on the stepwise learning programmes undertaken to identify the main sources of error associated with the determination of the mandatory organic contaminants in the marine monitoring programmes. Details are given on the preparation and use of LRMs and CRMs to maintain analytical control and quantify the laboratory errors in relation to the measurement of changes in the environment.     

Separation and determination of m-phenoxybenzaldehyde reaction products by capillary gas chromatography

A capillary GC method employing an internal standard has been developed and successfully used for quantitative determination both of the raw materials used for the manufacture of m-phenoxybenzaldehyde and for the components of the reaction mixtures obtained at various stages of the development of the process. A complete analysis can be performed in a single temperature programmed run.     

The effect of simultaneous temperature, pressure and stress on the experimental annealing of spontaneous fission tracks in apatite: a brief overview

Tracks made in minerals by the electronic stopping of uranium fission fragments provide a modern geological dating tool, and are believed also to yield specific information on the low-temperature thermal history of rocks. Experimental work showing that the damaged crystal lattice along a fission track recovers primarily as a function of temperature ignored the fact that the basic theory of atomic diffusion requires an exponential decrease in the intrinsic diffusion coefficient with increasing pressure. Here, fission track recovery was experimentally investigated in basic apatite under the simultaneous influences of temperature, pressure and stress. We show that track fading is a complex recovery mechanism responding to several environmental physical parameters simultaneously. In particular a strong decrease in the track recovery rate was observed as a function of increasing pressure. And a nearly temperature-independent recovery was observed in samples under stress.     

Temperature dependence of pressure broadening of NH3 perturbed by H2 and N2

The temperature dependence of pressure broadening of 134 rovibrational transitions of several branches in the ν₄ and 2ν₂ bands of ammonia perturbed by H₂ and N₂ has been measured using a high-resolution Fourier transform spectrometer. The temperature range covered during the experiments was between 235 and 296 K. The pressure-broadening linewidths were obtained using the method of multipressure fitting to the measured shapes of the lines. These broadenings were also calculated using a semiclassical model leading to a reasonable agreement with the observations and reproduces well the strong systematic experimental J and K quantum number dependencies. The retrieved values of the linewidths, along with those previously determined from the spectra at room temperature, were used to derive the temperature dependence of both H₂ and N₂ broadening of NH₃ lines. The broadening coefficients were shown to fit closely the well-known exponential law. For both experimental and theoretical results, the temperature exponent n has been obtained. Careful inspection of the experimental values shows that, contrary to the linewidths, the coefficient n is nearly K independent within each J multiplet. Also for a given J it does not seem to exhibit any noticeable variation with the type of rotational transition. On the other hand, the calculated n values exhibit a strong J and K systematic dependencies. n increases with K for a given J, decreases with J for a given K and are independent of the type of rotational transition.     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

Effects of microstructure on the temperature dependence of relative initial permeability of NiCuZn ferrites

In the present work, ferrites with compositions of (Ni_0.27Zn_0.64Cu_x)Fe_1.98O₄ (x=0.1, 0.2) were prepared by conventional ceramic methods. The relationship between the microstructure and the temperature dependence of relative initial permeability was investigated. It was found that intergranular pores in the ferrites generate large demagnetizing fields, reducing the temperature dependence of the effective anisotropy field H_eff, and decreasing the temperature dependence of the relative initial permeability accordingly. However, intragranular pores pin the movement of domain walls. Compared with the permeability induced by domain wall motion, the permeability that resulted from the spin rotation is more sensitive to temperature. As a result, the relative initial permeability of ferrites becomes more sensitive to temperature with increasing micropores within grains.