Synthesis and Liquid Crystalline Behavior of Random Copolymer of Poly(ethylene oxide) Macromonomer and Liquid Crystalline Monomer by the Photon Transmission Technique

Random copolymers of poly(ethylene oxide) macromonomer with p‐vinylbenzyl end‐functional group (PEOVB) and liquid crystalline monomer, namely 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate (COA), were prepared by conventional free radical polymerization. A living anionic polymerization technique was employed for the synthesis of PEO macromonomers bearing p‐vinylbenzyl moiety at one end. The photon transmission method was also applied to study the phase transitions of COA monomer and its random copolymer with PEO. It was found that, for both samples, the nematic‐smectic A transition is continuous, but the critical fluctuation regions do not allow to obtain 3D XY values. Instead, we have obtained the values close to mean field regime. Scaling of thermal hystersis for random copolymer sample near the nematic‐isotropic transition was studied as well. Thermal hysteresis loops were produced under linearly varying temperature. It was shown that the areas of the hysteresis loops scale with the temperature scanning rate with an exponent being equal to 0.614 which is in good agreement with the field‐theoretical value.     

Synthesis of L-Lysine and L-Glutamic Acid Derivatives with Long Alkyl Chains and Polycondensation of Langmuir-Blodgett Films

Two esters of L-lysine and L-glutamic acid containing long alkyl groups were synthesized and their polycondensation in monolayers and multilayers was investigated. The pressure-area isotherms of the ester of L-lysine depend markedly on the time of residence at the air-water interface. The change of FT-IR spectra of the deposited film, which can be lifted as a Z-type film, indicates that polycondensation can occur in the monolayer at 10°C without any treatment. The spectrum of the film cast from chloroform hardly changed with time. These results lead to the conclusion that a regular arrangement of monomer molecules in the monolayer, where the amino and ester carbonyl groups are concentrated, is more suitable for the polycondensation. The ester of L-glutamic acid can also form stable monolayers which can be easily deposited on a hydrophobic plate as a Y-type film by the Blodgett technique. The polycondensation of multilayers under an atmosphere of triethylamine was investigated by IR spectroscopy. It indicates that the condensation in multilayers proceeds via intermolecular and intramolecular reactions, by which poly(L-glutamate) derivatives and 2-pyrrolidone derivatives are formed, respectively. The condensation in the bulk crystalline powder gives exclusively the 2-pyrrolidone derivative by intramolecular reaction. These results suggest that the monomer molecules in the multilayers are favorably aligned for the intermolecular reaction, in contrast to the situation in the bulk crystalline powder.     

Synthesis and mesomorphic investigation of calamitic liquid crystalline system ethyl-[4-(4′-decyloxy)benzoyloxy]-benzoate (4-EDBB): A temperature dependent micro-Raman study and DFT calculations

A new liquid crystalline material containing diester linking group ethyl-[4-(4′-decyloxy)benzoyloxy]-benzoate (4-EDBB) was synthesized. The phase transition temperatures were noted by differential scanning calorimetry (DSC), the texture pattern were observed by polarizing optical microscopy (POM) and temperature dependent Raman study was employed to observe the transitions as well as to understand the molecular rearrangement during phase transition. The transitions were observed with all the three techniques but the Raman signature of crystal → smectic A transition is many fold and more precise and accurate. The correlation between intermolecular interaction and phase behaviour has been discussed using temperature dependence Raman data of CH in-plane bending and CO stretching vibrations. With the help of DFT method the possible dimers of 4-EDBB were optimized and the rotational isomers were also investigated. There exists weak hydrogen bonds at room temperature, which breaks as the temperature is increased causing the CH in-plane bending to shift lower and CO stretching vibrations to shift higher. The discussion of the temperature dependent Raman data reveals that at crystal → smectic A transition as a result of intra-molecular rotation the molecules transform from trans- to cis- conformer.     

基于改进极根学习机的回转窑煅烧带温度预测方法

针对传统算法预测回转窑煅烧带温度存在精度低、速度慢的问题,提出了基于改进极限学习机(ELM)的回转窑煅烧带温度预测方法。对ELM输入权值矩阵定义了变换系数,采用黄金分割法在给定区间内搜寻变换系数的最佳值,改进了ELM网络参数的确定方式,弥补了随机确定输入权值并且不作调整的缺陷,在保证ELM训练速度的前提下提高预测精度、减小模型随机性。实验结果表明,改进的ELM预测精度高、训练速度快、模型性能优,可满足工况恶劣的回转窑的生产需要。     

红外成像系统NETD参数测试算法及应用研究

噪声等效温差(NETD)是表征红外成像系统灵敏度的关键参数,也是评估红外成像系统性能的重要参数之一,应用广泛。通过对红外成像系统3D噪声、信号传递函数(SiTF)、NETD等参数测试方法、算法和流程研究,给出一种基于视频文件的3D噪声离线对比测试方法和一种SiTF线性区自动判断计算斜率算法,在此基础上针对某型技术保障装备国产化光电检测平台开发了配套应用软件功能模块。实现了通过计算单位均方根噪声所对应的SiTF斜率值,分析得出系统NETD参数值的功能。以某型热像仪为被测对象,开展了测试结果重复性和一致性试验,并与美国Optikos公司I-SITE红外整机测试系统进行了对比测试。实验结果表明开发的NETD参数测试功能模块测试精度和重复性满足设计要求,具有较高实用价值,已进行了工程应用。     

High Temperature Corrosion Resistance of Coatings Deposited by Hvof for Application in Steam Turbines

The geothermal steam turbines are exposed to mechanisms of corrosion/erosion that weakens its components and reduces their useful life. Due to this problem work has been done in application and characterization of coating in solid state by means of the technique of high-velocity Oxygen Fuel (HVOF), evaluating the corrosion rate (V_corr) at high temperature of MCrAlY and Diamalloy 4006 coatings deposited on stainless steel SS304. Test was performance in an Autoclave at 170 ⁰C using a modified geothermal fluid as electrolyte. Open circuit potential was monitoring during 24 hours until the system reached the equilibrium. After that, Polarization and Impedance Spectroscopy techniques were used to evaluate the specimens. For microstructure characterization; X–ray Diffraction (XRD), electron sweep microscope (SEM) and Optical microscope were applied. Results show that both coatings (Diamalloy 4006 and MCrAlY), have low current density compare with the substrate, which is an indicative of a lower corrosion rate due to the passive behavior of the species deposited on the Surface of the coating.     

Fabrication of bacterial cellulose thin films self-assembled from sonochemically prepared nanofibrils and its characterization

Bacterial cellulose (BC) film formation could be a critical issue in nanotechnology applications such as biomedical or smart materials products. In this research, purified pretreated BC was subjected to high intensity ultrasound (HIUS) and was investigated for the development of BC films. The morphological, structural and thermal properties of the obtained films were studied by using FE-SEM, AFM, FT-IR, XRD, TGA and DSC characterizations. Results showed that the most favorable purification treatment was the 0.01 M NaOH at 70 °C for 2 h under continuous stirring. The most suitable ultrasound operating conditions were found to be, 1 cm distance of ultrasonic probe from the bottom of the beaker, submerged in cold water bath cooling around 12 ± 2 °C. The power (25 W/cm²), time (30 min), BC concentration (0.1% w/w), amplitude (20 μm) and frequency (20 kHz) were maintained constant.     

Reflection error correction of gas turbine blade temperature

Accurate measurement of gas turbine blades’ temperature is one of the greatest challenges encountered in gas turbine temperature measurements. Within an enclosed gas turbine environment with surfaces of varying temperature and low emissivities, a new challenge is introduced into the use of radiation thermometers due to the problem of reflection error. A method for correcting this error has been proposed and demonstrated in this work through computer simulation and experiment. The method assumed that emissivities of all surfaces exchanging thermal radiation are known. Simulations were carried out considering targets with low and high emissivities of 0.3 and 0.8 respectively while experimental measurements were carried out on blades with emissivity of 0.76. Simulated results showed possibility of achieving error less than 1% while experimental result corrected the error to 1.1%. It was thus concluded that the method is appropriate for correcting reflection error commonly encountered in temperature measurement of gas turbine blades.     

The investigation of neutralization process of gas-phase sewage sludge using thermal plasma method

The purpose of this research is to investigate the influence of plasma flow on the composition of gaseous phase organic waste. The experimental method and simulation program “Chemical Workbench” were used for this research. The gas phase waste was neutralized using air plasma in the temperature range of 1200–1700 K. The reactor simulation results showed that the amount of atomic oxygen and nitrogen decreases by 0.5%, meanwhile the amount of carbon monoxide increases by 0.5 percent, as the plasma forming gas is air. The investigation of percentage concentration results showed that as the temperature reaches 1700 K, the H₂ decreases by 4%, CO increases by 7%, CH₄ decreases by 0.4%, CO increases by 0.5%, N₂ decreases by 5%. The experimental measurement results of percentage concentration correlates sufficiently with simulation results for listed gas.     

基于PLC的环境模拟系统温度控制算法的研究与实现

针对环境模拟试验温度控制系统中被控对象存在的非线性、时滞等特点,本文采用区间限幅PID控制算法和模糊PID控制算法对传统控制方法进行了改进。首先为了解决模拟量三通粗调阀调节缓慢的缺点,建立了区间限幅PID控制算法的控制规则表,并将其在PLC中实现。其次提出用模糊PID控制算法来解决电加热器的非线性、大时滞性问题,并结合实际控制经验建立了模糊控制规则表,然后将模糊PID控制算法在PLC中进行实现。最后将限幅PID和模糊PID控制算法应用于某大型环境模拟试验控制系统,实验结果表明利用改进算法对温度控制具有良好的稳定性及精确度。