Hierarchy of rational order families of chaotic maps with an invariant measure

We introduce an interesting hierarchy of rational order chaotic maps that possess an invariant measure. In contrast to the previously introduced hierarchy of chaotic maps [1–5], with merely entropy production, the rational order chaotic maps can simultaneously produce and consume entropy. We compute the Kolmogorov-Sinai entropy of these maps analytically and also their Lyapunov exponent numerically, where the obtained numerical results support the analytical calculations.     

Size dependence of the thermo-electrodynamics states of composite high-Tc superconductors and its effect on the current instability conditions

The effect of transverse geometries of the slab of composite high-T_c superconductors on their stable and unstable thermal and electrodynamics transient states in the incomplete and complete penetration modes during the current charging are discussed. The transient period when the electric field that is induced by the charged current becomes more homogeneous during the initial stage of the complete penetration mode in the sub-critical voltage range is studied. In the over-critical voltage range, the cross-section shape of the slab affects its stable and unstable temperature variation. As a result, the current instability condition is not identical for high-T_c superconducting composite tapes that have the same cross-sectional area with various shapes of the cross-section. The condition depends on their thickness: the less thickness, the more stable the current distribution in the composite superconductors with the same cross-sectional area. This feature is a result of the unavoidable reduction of the current-carrying capacity of a high-T_c superconducting composite by the temperature increase. This reduction is caused by the relevant temperature dependence of electrodynamics states of the composite. This temperature dependence happens even during a stable stage of the current charging. These mechanisms must be considered during experiments at which the critical or quenching currents are defined.     

滑动移除小波分析法在动力学结构突变检验中的应用

标度指数计算的即时性与准确性对相关时间序列的动力学结构突变分析至关重要,然而现有方法在即时性与准确性上一直无法兼顾.将小波分析方法与滑动移除窗口技术相融合,提出一种新的动力学结构突变检测方法——滑动移除小波分析法.通过选取不同的滑动移除窗口,分别对构建的线性、非线性理想时间序列进行动力学结构突变分析,结果表明不论是线性时间序列还是非线性时间序列,滑动移除小波分析能够准确地检测到序列的动力学结构突变点及突变区间,对于滑动移除窗口长度依赖性较小,具有很强的稳定性,而且在计算速度上明显优于滑动移除重标极差和滑动移除方差分析方法,将在大数据处理中具有一定的优势.同时分别对线性、非线性理想时间序列添加高斯白噪声,结果表明滑动移除小波分析具有很强的抗噪能力,能够准确地检测到加噪后序列的突变点.对佛坪站日最高温度实测资料的动力学结构突变的准确检测进一步验证了该方法的有效性.滑动移除小波分析法可为具有相关性的系统动力学结构突变的快速、准确检测提供一种途径.     

基于复合腔的波长可调谐连续橙红色激光器

设计并研制了一种基于复合腔结构的波长可调谐、瓦级连续输出的橙红色激光器.该激光器是由半导体激光侧泵Nd∶GdVO_4晶体产生p-偏振1 062.9nm基频光的谐振腔和使用周期性极化晶体MgO∶PPLN(三个极化周期为29.0μm、29.8μm和30.8μm)的单共振光学参量振荡器组成.在两个谐振腔的重叠区域,利用Ⅱ类临界相位匹配KTP晶体对s-偏振信号光与p-偏振1 062.9nm基频光进行腔内和频.通过对MgO∶PPLN晶体进行三个不同极化周期的调谐和30℃~200℃范围内的温度调谐,在三个波段(613.4~619.2nm@29.0μm、620.2~628.9nm@29.8μm和634.4~649.1nm@30.8μm)获得了波长可调谐的橙红色激光连续输出,并在相应波段(3 980.0~3 758.5nm@29.0μm、3 714.2~3 438.3nm@29.8μm和3 278.0~2 940.2nm@30.8μm)获得了波长可调谐的中红外闲频光的连续输出.在30℃最低调谐温度,通过改变晶体的极化周期,在613.4nm、620.2nm和634.4nm处测得最大连续输出功率分别为1.52 W、2.21 W和3.03 W,对应的三束闲频光最大连续输出功率分别为2.36 W@3 980.0nm、3.17 W@3 714.2nm和4.13 W@3 278.0nm.     

机载成像光谱仪CCD制冷系统设计与实现

为减小紫外成像光谱仪中CCD暗电流噪声,提高系统信噪比,需要对CCD进行制冷.为此采用模拟比例-积分-微分电路设计了CCD制冷电路,利用Zregler-Nicholas经验整定方法确定比例-积分-微分参量,以实现降温速率不大于5℃/min、温度稳定度为±0.05℃,满足最大制冷温差.将该制冷系统应用于机载成像光谱仪进行了测试,结果表明:环境温度变化不会影响制冷效果,在达到制冷目标温度-20℃后,CCD探测器暗背景下光谱维噪声平均灰度响应值为1 072,暗背景信号非均匀性下降到0.5%,满足光谱数据反演要求.     

光声光谱技术在多组分气体浓度探测中的应用

CO和CH_4气体作为判断变压器运行状态的故障气体,对其浓度的探测在变压器维护中具有重要意义.为了准确探测变压器运行过程中产生的CH_4和CO气体浓度,本文利用光声光谱技术,设计了一套基于宽带光源的多组分气体探测系统,和共振型光声系统相比,该系统中所用的非共振型光声池体积小,易加工,池内各处信号强度相同,降低了对声学信号探测器的安装要求.系统的性能通过对CO和CH_4气体的探测进行评估.首先,从理论上分析了信号强度与调制频率呈反比,然后根据宽带光声系统在不同调制频率下的响应,确定系统的最佳调制频率为22 Hz.在最佳调制频率下,根据温度与待测气体光声信号的关系,对光声信号进行温度补偿,消除温度变化对光声信号的影响,进一步提高了系统的稳定性.最后,通过不同浓度的CH_4和CO气体对系统进行标定.实验表明,温度补偿前后,光声信号随温度的漂移分别为0.023 23V/℃和8.383 48×10~(-5) V/℃,通过对不同浓度CH_4和CO气体的探测,系统的线性度分别达到0.995和0.998 4.在一个大气压下,积分时间为1s时,宽带光声探测系统对CO和CH_4气体的探测极限浓度能够达到1μL/L.该系统成本低,线性度好,探测灵敏度符合国标对变压器维护过程中CO和CH_4气体的探测要求.     

������״��ͭ�����߹���Ȧ��ȴЧ����Ӱ��

采用Fluent和ANSYS Workbench软件对水冷铜基螺线管线圈进行了流体分析及热流耦合分析.得到了水冷铜基螺线管线圈内壁面温度随曲率角和曲面角的变化关系.分析了3种不同流道截面(圆形、椭圆形、三叶形)的螺旋管线圈在同样工况下的出口及交界面的最大温度、平均温度和最小温度,发现流道形状会严重影响螺线管线圈的换热,椭圆截面和三叶形截面的螺旋管线圈相比圆形截面的螺旋管线圈具有更好的冷却效果,如平均壁表面温度均降低了近70℃,管壁上的最高温度也控制在了100℃以内,最大温差也控制在了60℃以内.     

Temperature effect on qubit in RbCl quantum rod

We change the ellipsoidal boundary in a quantum rod (QR) into a spherical one by a coordinate transformation, and then study the influences of the ellipsoid aspect ratio and polaron radius on the probability density (PD) and oscillation period (OP) of an electron with the variational method of Pekar type (VMPT). By employing the quantum statistics theory (QST), we investigate the temperature effects on the PD and the OP. Numerical results denote that the electron probability density and the oscillation period increase (decay) with raising temperature in lower (higher) temperature regime. The electron probability density increases (decreases) with increasing ellipsoid aspect ratio when the temperature is in lower (higher) regime. The electron probability density decays (enhances) with increasing polaron radius when the temperature is in lower (higher) temperature regime. The oscillation period is an increasing function of the ellipsoid aspect ratio, whereas it is a decreasing one of the polaron radius.     

Macrokinetic study on ozone boundary concentration. Effect of temperature

The process of ozone production in pure oxygen using the tubular, high voltage pulse supplied ozonizer was studied. The unusual methodology of conducting kinetics measurements of the ozone synthesis process was presented. It was shown how the process rate changes along the discharge gap. The effect of power density and gas residence time in the discharge gap on the process rate was analysed. The temperature influence on the course of the process, particularly on the ozone boundary concentration and ozone decomposition rate constant, was discussed.     

多喷嘴氦冷偏滤器的优化与分析

利用ANSYS/CFX对聚变堆氦冷多喷嘴冷却偏滤器模块在相同高热负荷条件但不同冷却条件下进行了有限元数值分析,得到了偏滤器冷却单元的温度和换热系数分布图,将该温度场作为结构力学分析的加载条件,利用ANSYS/Mechanical对冷却模块进行了稳态条件下的结构应力分析,得到了具有不同结构参数的偏滤器模块的应力分布。通过分析各结构参数对偏滤器模型的热应力的影响,对结构参数进行筛选,得到内应力相对较低的结构设计,从而优化多喷嘴氦冷偏滤器结构。