基于185例肺小结节CT图像灰度共生矩阵纹理特征的多水平模型研究

为探讨基于肺小结节CT图像灰度共生矩阵纹理特征的多水平模型,对北京友谊医院和宣武医院提供的185例2137张肺小结节CT图像提取4种灰度共生矩阵纹理特征。根据该类资料具有层次结构的特点,拟合多水平统计模型。结果表明,能量,熵和惯性矩,在患者水平上具有聚集性,且在良恶性肺小结节间的差异有统计学意义(P值均小于0.001),提示多水平模型可以灵活有效地处理肺小结节CT图像这类具有层次结构的数据,在一定程度上有利于早期肺癌的鉴别诊断。     

Growth and characterization of highly c‐axis textured SrTiO3 thin films directly grown on Si(001) substrates by ion beam sputter deposition

Highly c‐axis textured SrTiO₃ (STO) thin films have been directly grown on Si(001) substrates using ion beam sputter deposition technique without any buffer layer. The substrate temperature was varied, while other parameters were fixed in order to study effect of substrate temperature on morphology and texture evolution of STO films. X‐ray diffraction, pole figure analysis, atomic force microscope, and high‐resolution electron microscopy were used to characterize and confirm quality and texture of the STO films. The experimental results show that optimum substrate temperature to achieve highly c‐axis textured films is at 700 °C. The full width at half maximum (FWHM) of 002_STO was found to be 2° and fraction of (011) orientation was as low as 1%. The surface morphology was Volmer‐Weber growth mode with a small roughness ∼1 nm. The lowest leakage current density (5.8 μA/cm² at 2 V) and the highest dielectric constant (ε_STO ∼ 98) were found for highly c‐axis textured films grown at 700 °C. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

小波基的选取对图像去噪的影响

小波图像去噪方法是现代图像处理中的重要组成部分，小波基的不同选取直接影响到去噪的效果．本文在全局阈值的标准下，通过对噪声水平和图像纹理特征的估计，讨论了小波基的正交性和线性相位性对去噪结果的不同影响，提出了选取小波基的近似标准．     

Texture development during cold rolling of Fe–Cr–Ni alloy-experiments and simulations

Abstract

In the present work, evolution of microstructure and crystallographic texture during cold rolling of two phase Fe–Cr–Ni alloy was investigated. Fe–Cr–Ni alloy (in initially solution annealed condition) was uni-directionally cold rolled in a laboratory rolling mill to different thickness reductions. Scanning electron microscopy was used to observe the changes in microstructure, while X-ray diffraction was used to investigate changes in crystallographic texture of austenite and ferrite (through changes in orientation distribution function). Crystallographic texture was also simulated using different crystal plasticity models (Full constraint Taylor, relaxed constraint Taylor (lath and pancake) and co-deformation Visco Plastic Self Consistent (VPSC)). With the increase in plastic deformation, there were morphological as well as crystallographic changes in the microstructure. Strong α-fibre (RD//〈1?1?0〉) texture was developed in ferrite, while brass ({1?1?0}〈1?1?2〉) and Goss ({1?1?0}〈0?0?1〉) was dominant in austenite after 80% cold rolling. The formation of brass type texture after deformation has been attributed to the formation of shear bands and presence of strong crystallographic texture in the initial solution annealed material. Both Taylor as well as VPSC models could not capture the changes in texture with deformation accurately. For ferrite: γ-fibre (ND//〈1?1?1〉) and for austenite: Cu ({1?1?2}〈1?1?1〉) component was always present in the simulated textures. Possible reason for this could be the pining effect of interface boundaries and non-incorporation of non-crystallographic shear banding in the Taylor and VPSC models.     

Effect of thermomechanical processing on microstructural evolution and deformation behaviour of polycrystalline magnesium under quasi-static and high strain rate conditions

Abstract

The effect of thermomechanical processing on microstructure evolution and room temperature flow behaviour of polycrystalline magnesium in compression at strain rates of ~10^?2 and ~10³ s^?1 was investigated. Different initial microstructures were produced by optimising rolling and annealing cycles. Prior to annealing for 1 h at 350 °C, Mg samples were processed by two different treatments such as (i) hot rolling at 350 °C and (ii) hot rolling at 350 °C plus cold rolling at room temperature. Introduction of cold working step led to an increased fraction of hard oriented grains with a marginal grain size difference in post-annealed samples. A profound effect of thermomechanical processing on strain hardening rate as well as rate-sensitive flow behaviour of Mg was observed. The influence of prior processing history and strain rate on flow behaviour of Mg was clearly reflected in terms of texture strengthening/weakening phenomena and formation of microstructural deformation bands.     

The effect of clamped and free boundaries on long range strain coupling in structural phase transitions

In ferroelastic structural phase transitions, the atomic ordering in one cell creates a local strain field which is propagated elastically throughout the material, resulting in an effective or indirect coupling J(R _ij ) between the ordering in cells i and j. With free boundaries on the sample, the J(R _ij ) contains a Zener-Eshelby term J _Z of infinite range, which largely determines the transition temperature T _c. The present paper shows what happens when the boundaries are clamped. On cooling from a high temperature an anomaly takes place at more or less the same temperature as the phase transition for free boundaries. Cooling results in an irregular pattern of domains with positive and negative order parameter whose long range strains cancel. Two cases are distinguished. In the “tweed” case coherent domain boundaries form easily and result in fine lamellar domains. When coherent domain boundaries are not possible (the “non-Sapriel”) case, larger less regular domains are formed. In either case the macroscopic net strain adds up to zero.     

Gd2Ba4CuWOx掺杂对单畴GdBCO超导块材性能的影响

本文采用顶部籽晶熔融织构方法(TSMTG)制备出了具有不同纳米Gd2Ba4CuWOx(GdW2411)掺杂量的系列单畴GdBCO超导块材,并研究了GdW2411的掺杂量对其微观形貌以及磁悬浮力大小的影响.研究结果表明,通过添加GdW2411粒子,可以成功的在单畴GdBCO超导块材中引入纳米GdW2411磁通钉扎中心,其粒径约在50～200nm之间;随着GdW2411掺杂比例的增加,纳米粒子的密度逐渐变大,粒度也有所变大;GdBCO超导块材磁悬浮力的大小与GdW2411掺杂量密切相关,只有当GdW2411的掺杂比例达到最佳值时,样品的磁悬浮力才达到最大.这些结果对进一步提高GdBCO超导块材性能具有重要的指导意义.     

零视距地物长波红外特征场景仿真研究

为仿真地物长波红外场景图像,根据地表温度随时间变化的规律,并结合气象状况、背景材质、热特性参量、热状态等参数,在对太阳辐射、大气长波辐射、大气温度和地表热传导等影响地表温度变化的因素进行分析的基础上,建立了基于热平衡理论和热传导过程的方程。解算出多种常见地表一日之中的温度变化情况,并将其应用于由相同景物可见光纹理图像反演出的相应红外纹理图像中。在考虑景物表面自身发射、反射的辐射计算模型的前提下,生成了具有相似红外纹理细节的地表红外场景。结果表明,该方法可生成接近真实感的红外场景,有效地模拟仿真地物的长波红外特征。     

Thermal and optical characterization of a novel series of supramolecular liquid crystals

Supramolecular hydrogen bonded liquid crystal (SMHBLC) homologous series is synthesized and characterized. Hydrogen bond is formed between p-n-alkyloxy benzoic acids (nOBA, where n=7 to 12) and Iodo substituted benzoic acid (I_mBA) respectively. The isolated homologs are characterized by various techniques like Polarizing Optical Microscopy (POM), Differential Scanning Calorimetry (DSC), ¹H Nuclear Magnetic Resonance Spectroscopy (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). From the POM and DSC studies phase diagram has been constructed and discussed. A new smectic ordering, labeled as smectic R, has been characterized which exhibits a ribbon like texture. This phase is observed in a complex pertaining to the undecyloxy carbon number. Tilt angle in smectic R phase and in traditional smectic C of all the complexes have been experimentally deduced and the results are fitted and so obtained β value concurrences with the Mean field theory predicted value.     

Elastic constant anisotropy,core structure of wedge disclinations and optical texture of main-chain P-4-BCMU liquid crystals

The elastic constant anisotropy and the core structure of wedge disclinations with strengths s = ±½ of lyotropic liquid crystals of a soluble polydiacetylene, P-4-BCMU (M _w = 5.15 × 10⁵, M _n = 2.16 × 10⁵, and M _w/M _n = 2.4), in chloroform was studied. The Frank elastic constant anisotropy defined by ε = (k₁₁ ? k₃₃)/(k₁₁ + k₃₃) for this polymer was determined by three different methods. The results show that the value of ε for this polymer is 0.5 (±0.05) in solid state and/or in liquid crystal state, indicating that the splay constant k₁₁ is three time higher than the bend constant k₃₃. This result further implies that splay is unfavorable in the liquid as it requires greater energy than bend. In the area adjacent to the core of a singularity the value of ε increases with decreasing distance to the core, indicating increasing anisotropy of the elastic constants toward the core. The influence of the elastic constant anisotropy on the optical texture of the LC polymer when viewed by polarizing light microscope is studied. © 1994 John Wiley & Sons, Inc.