Ba-La-O-(F)催化剂的碱性及其OCM反应性能

采用XRD,TPD和高温原位IR光谱对La₂O₃,BaO/La₂O₃,BaF₂/La₂O₃,LaOF和BaF₂/LaOF等催化剂的组成、结构和CO₂在催化剂上的吸附状况进行了表征,并结合催化剂性能评价结果对该系列催化剂的碱性及其与OCM反应性能的关系进行了考察.结果表明,催化剂OCM反应性能与其酸碱性的强弱无简单的对应关系.     

以Liq作为电子注入层的高效有机电致发光器件

利用Liq(8-hydroxy-quinolinato lithium)作电子注入层，制备了结构为ITO(indium tin oxide)／TPD(N，N′-diphenyl-N，N′—bis(3—methylphenyl)—1，1′biphenyl-4，4′diamine)／Alq3(tris-(8-hydroxy-quinolinato)aluminum)／Liq／Al的电致发光器件。实验表明，以Liq作为电子注入层器件的效率约为无Liq器件的5倍。其原因可归于Liq在金属铝电极与Alq3有机层之间产生偶极层，从而形成铝与有机层间的欧姆接触，使电子注入效率大幅提高。     

The adsorption geometry of sulphur on Ir{1 0 0}: A quantitative LEED study

A quantitative low energy electron diffraction (LEED) analysis has been performed for the p(2 × 2)-S and c(2 × 2)-S surface structures formed by exposing the (1 × 1) phase of Ir{1 0 0} to H₂S at 750 K. S is found to adsorb on the fourfold hollow sites in both structures leading to Pendry R-factor values of 0.17 for the p(2 × 2)-S and 0.16 for the c(2 × 2)-S structures. The distances between S and the nearest and next-nearest Ir atoms were found to be similar in both structures: 2.36 ± 0.01 Å and 3.33 ± 0.01 Å, respectively. The buckling in the second substrate layer is consistent with other structural studies for S adsorption on fcc{1 0 0} transition metal surfaces: 0.09 Å for p(2 × 2)-S and 0.02 Å for c(2 × 2)-S structures. The (1 × 5) reconstruction, which is the most stable phase for clean Ir{1 0 0}, is completely lifted and a c(2 × 2)-S overlayer is formed after exposure to H₂S at 300 K followed by annealing to 520 K. CO temperature-programmed desorption (TPD) experiments indicate that the major factor in the poisoning of Ir by S is site blocking.     

Heterogeneity of OH Groups in H-Mordenites TPD and IR studies of ammonia desorption

We have investigated the temperature-programmed desorption (TPD) of ammonia during the activation of NH4Na-mordenites of different exchange degrees. Using a regularization method, desorption energy distribution functions have been calculated. The obtained results indicate the heterogeneity of the bridging Si-OH-Al groups in HNa-mordenites. This was concluded from the width of the distribution functions and from the presence of submaxima. For HNa-mordenites of exchange degrees below 50%, containing only hydroxyls in the broad channels, two distinct submaxima are present, thus suggesting the presence of at least two kinds of bridging hydroxyls of various acid strengths. In HNa-mordenites of exchange degrees above 50%, the hydroxyls appear in narrow channels and the distribution of ammonia desorption energy broadens on the side of higher energies. This may be related to a strong stabilization of ammonium ions inside narrow channels. The maximum concentrations of hydroxyls of desorption energies between 95 and 135 kJ mol_-1 and between 135 and 165 kJ mol_-1 calculated from TPD data were 3.9 and 3.3 OH per unit cell (u.c.). These values agree well with our previous IR results of concentrations of hydroxyls in broad and in narrow channels (3.7 and 2.8 OH per u.c.). The TPD data obtained for the heterogeneity of OH groups in HNa-mordenites are in accordance with the IR data concerning ammonia desorption. The IR band of OH groups restoring upon saturation of all the hydroxyls with ammonia and subsequent step-by-step desorption at increasing temperatures shifts to lower frequencies indicating that there are hydroxyls of various acid strengths and the less acidic hydroxyls restore first at lower desorption temperatures. This revised version was published online in July 2006 with corrections to the Cover Date.     

The interactions of thiophene with polycrystalline UO2

We have studied the adsorption and desorption of thiophene on polycrystalline UO₂ as function of coverage, over the temperature range 100-640 K, using X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD) and electron stimulated desorption (ESD). Thiophene is found to adsorb molecularly on stoichiometric UO₂. C 1s and S 2p XPS spectra are measured at different thiophene exposures and at different temperatures; they show no evidence for the presence of dissociation fragments, confirming that thiophene adsorbs and desorbs molecularly on a polycrystalline stoichiometric UO₂ surface. The variation of the S 2p and C 1s intensity as function of exposure, together with ESD measurements of O⁺ as function of exposure, can be connected to the growth mode of a thiophene film on UO₂; the thiophene film converts from a flat-lying configuration to an inclined structure as coverage increases. The effects of X-rays, UV, and electron irradiation on thiophene films have been studied in two different coverage regimes, monolayer and multilayer. Irradiation leads to a modification of thiophene films, and appreciable concentrations of species stable to 640 K are present on the surface for both regimes. The XPS results suggest that irradiation induces polymerization and oligomerization, as well as formation of thiolates and dissociation fragments of thiophene. The adsorption and reactivity of thiophene on defective UO₂ surfaces have also been studied. The O vacancies and defects in the oxide surface cause cleavage of C-H and C-S bonds leading to the dissociation of thiophene at temperatures as low as 100 K. These results illustrate the important role played by O vacancies in the chemistry of thiophene over an oxide surface.     

铁系复合氧化物催化性质的研究

合成出一系列La_(1-s)A′_sFeO_3(A′=Ca、Sr、Ba;0≤2≤1)复合氧化物催化剂,并研究了Ca、Sr、Ba部分取代La后催化剂对CO氧化活性的影响。以XRD测定其晶体结构。结果表明,除含Ca>0.5和Ba=1.0外均生成钙钛矿型结构。用XPS和TPD法研究了吸附性能。指认吸附氧是CO氧化的活性物种,并初步解释了活性规律的成因。     

Surface composition of alloys

The practical importance of alloy surfaces in catalysis, corrosion andother aspects of materials performance is widely recognized. What is needed now is sufficient knowledge of the relationship between externally controllable factors — alloy composition, temperature, environment — and surface properties — composition, structure, chemical activity — to control materials performance in these applications. Our purpose here is to review progress in determining and predicting the relationship between one surface property, composition, and certain externally controllable variables: overall composition, temperature, environment and physical form.We find that theoretical treatments of metal alloy surface composition now include essentially all significant physical effects and can predict values for most parameters of interest. Though improvements are still possible, the accuracy of predictions is more often limited by uncertainties or absence of the basic data for the calculations (e.g., thermochemical values) than by the models themselves.Alloy surface composition can now be measured well. The first monolayercomposition of large alloy slabs can be determined quantitatively over a wide temperature range in ultra-high vacuum. Difficulties with specimens of practical interest still challenge experimentalists. Among these are supported catalysts, surfaces under chemisorbed layers and composition of layers below the first. Significant progress is being made and we expect the next few years will see success.     

改性丝光沸石上甲醇胺化的研究─—水汽处理对沸石性能的影响

采用吡啶饱和中毒、ＮＨ３－ＴＰＤ、静态吸附、ＩＲ、ＸＲＤ和分子探针反应等方法，研究了用于甲醇胺化反应的改性丝光沸石催化剂性质．结果发现，丝光沸石水汽处理脱铝后的孔道结构基本不变，晶胞的收缩和非骨架铝在孔道内的沉积，不足以严重限制甲醇胺化产物三甲胺在孔道内的进出；且在改性后，由于非骨架铝在孔道内的沉积，分子筛内表面的微环境发生了变化，致使有些活性位不利于三甲胺的吸附和生成，从而有利于进一步提高目的产物二甲胺的选择性．     

Synthesis and electronic energy‐level regulation of imide‐fused poly(thienylene vinylene) derivatives

A series of novel poly(thienylene vinylene) derivatives (PTVs), P20‐P24 , with imide substituents were designed and synthesized by palladium‐catalyzed Stille coupling polymerization, wherein the imide substituent density was decreased gradually, which allowed us to explicitly study the effect of electron‐deficient substituent on the optical, electrochemical, and photovoltaic properties of the PTVs. All of the four polymers showed broad absorption bands with optical bandgaps between1.66 and 1.78 eV. By reducing density of electron‐deficient imide group, the LUMO energy levels of the polymers could be tuned gradually from ?3.75 to ?3.43 eV, with HOMO levels upshifted from ?5.64 to ?5.16 eV. Bulk heterojunction solar cells with the polymers as donor and PC₇₁BM as acceptor demonstrated very different excitons dissociation behavior. With decreasing the imide‐fused unit density, the open‐circuit voltage (V_OC) values in the devices decreased from 0.78 to 0.62 V, whereas the short‐circuit currents (J_SC) increased from 0 to 2.26 mA cm^?2 and then decreased to 1.01 mA cm^?2. By adjusting the electron‐withdrawing imide substituent density, power conversion efficiency of the PTVs‐based solar cells can be increased to four times, reached 0.86%. To the best of our knowledge, this is the first systematic study of the relationship between molecular energy level and photovoltaic properties of PTVs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4975–4982     

A TPD‐MS study of the interaction of coumarins and their heterocyclic derivatives with a surface of fumed silica and nanosized oxides CeO2/SiO2, TiO2/SiO2, Al2O3/SiO2

The interactions between coumarins and the surface of fumed SiO₂, CeO₂/SiO₂, TiO₂/SiO₂ and Al₂O₃/SiO₂ were assessed by means of temperature‐programed desorption mass spectrometry. The different stages of the thermolysis of coumarin were identified and an analysis of the underlying reactions was performed. The kinetic parameters of the involved reactions were thus obtained. The decomposition of thiazolyl‐substituted coumarins was found to proceed through a ‘thiazole–thiazine’ ring expansion in the adsorbed state. A linear correlation between the sigma constants (Σσ) of the coumarin substituents and the activation energy of CO₂ formation was obtained. Copyright © 2010 John Wiley & Sons, Ltd.