微纳米加工技术及其应用综述

材料与结构在微纳米尺度展现了许多不同于宏观尺度的新特征，纳米技术已经成为当前科学研究与工业开发的热门领域之一。微小型化依赖于微纳米尺度的功能结构与器件，实现功能结构微纳米化的基础是先进的微纳米加上技术，文章对微纳米加上技术做了一个综合的介绍，简要说明了微纳米加工技术与传统加工技术的区别，在微纳米加工技术的应用方面提出了一些合理选择加工技术的原则，并对当前微纳米加工技术面临的挑战和今后发展的趋势作了预测。     

综合网管中基于模型驱动的元数据管理

提出了一种基于模型驱动的元数据管理方案．方案采用了基于模型的形式化描述方法，统一了专业网管子系统间的元数据模式；通过引入模型驱动技术，从元模型的抽象层次消除了不同专业网管子系统之间存在的“信息孤岛”；方案还对综合网管环境下的元数据理论和交换机制进行了研究，并给出了元数据的管理框架以及元数据交换的Java接口映射．     

掺铒光纤放大器中上转换过程的影响

掺杂浓度的提高影响了掺铒光纤放大器(EDFA)的性能,对经典Giles模型提出了新的要求。首先研究了高掺杂下铒离子距离较小引起的上转换过程的机理,通过优化速率方程模型分析了上转换过程对EDFA的影响,得出了在泵浦光和信号光远远大于ASE光的假设下泵浦光和信号光沿光纤长度变化的近似表达式,并将该近似分析解与解析解进行了比较。仿真结果表明上转换过程会降低随光纤传输的信号光和泵浦光,影响EDFA的放大性能,并得出了当掺铒浓度大于2.95×1025m-3时,上转换过程的影响不能忽略的结论。     

区域技术创新系统评估体系的研究

技术创新对提升企业竞争力、提高综合国力、促进经济增长和国家持续发展非常重要。本在研究了区域经济发展和国家创新系统的相关献基础上，建立了系统、量化的区域技术创新系统评估指标体系，提出了决定区域创新系统技术创新能力的主要因素，并用TOPSIS方法对指标的量化进行了尝试。     

A Framework for Monitoring Progress and Planning Teaching Towards the Effective Use of Computer Algebra Systems

This article suggests a framework to organise a cluster of variables that are associated with students' effective use of computer algebra systems (CAS) in mathematics learning. Based on a review of the literature and from the authors' own teaching experience, the framework identifies the main characteristics of students' interactions with CAS technology and how these may be used to monitor students' developing use of CAS; from this, the framework may be used to plan teaching in order to gain greater benefit from the availability of CAS. Four case studies describing students' development over a semester are reported. These demonstrate a variety of combinations of technical competencies and personal attributes. They indicate the importance of both the technical and personal aspects but suggest that negative attitudes rather than technical difficulties can limit the effective use of CAS. Finally practical suggestions are given for teaching strategies which may promote effective use of CAS.This revised version was published online in September 2005 with corrections to the Cover Date.     

光学非球面反射镜轻量化制造技术

新一代的空间相机一般通过采用轻质大尺寸的非球面光学元件来提高系统的成像质量，以降低系统复杂性。而空间相机中的结构件主要是用来支撑和定位主镜，如果主镜制作得更轻，则系统的其它结构将会设计得更加轻巧。受此趋势影响，大口径非球面镜的轻量化问题成为一个研究热点。     

热喷涂技术的现状和发展

介绍了热喷涂工艺的特点，喷涂方法的种类及其技术以及热喷涂技术的应用概况，并对热喷涂技术的发展方向给予了展望。     

WIDE RANGE DETECTOR USING PARABOLIC CYLINDRICAL MIRROR FOR THz APPLICATIONS

A new, wide-band, high-speed and high-sensitivity THz detector has been developed. The prototype detector consists of a parabolic cylindrical mirror, a long wire antenna and a Schottky barrier diode. Direct detection measurements have shown a stable sensitivity of 150 ± 50 V/W for 1–2 THz without any adjustments. The long wire antenna was fixed at the focus of parabolic cylindrical mirror then it has been realized less operation steps, easy coupling to the external THz signals and a dramatic enhancement in the practicality of this system. The optically polished mirror and frosted surface one showed comparable sensitivities, thus easy polishing and less cost mirror fabrication can be applied for this system. The radiation pattern showed a maximum radiation angle of approximately 23° with its dominant main lobe, which was attributed to the wire antenna character and confirmed good agreements with classical antenna theory.     

TERAHERTZ QUALITY CONTROL OF POLYMERIC PRODUCTS

We report on experiments that evaluate the potential of terahertz (THz) time-domain spectroscopy (TDS) for quality control of polymeric compounds. We investigate specimens out of a polyethylene compound with silver-coated titanium dioxide nanospheres and a glass-fiber reinforced epoxy composite. We further examine an industrial polymer product produced by injection molding. Our data demonstrates that THz imaging is a powerful tool for contactless quality control in the polymer industry.