Classification Performance of a Low Pressure Differential Mobility Analyzer for Nanometer-sized Particles

Size distribution measurements and classification tests by a low pressure differential mobility analyzer (LPDMA) for nanometer-sized silver particles and cesium iodide particles under low pressure conditions (123–300 Torr) were performed using a transmission electron microscope (TEM) and the tandem DMA technique. When the ratio of the sheath gas flow rate and the aerosol gas flow rate was set at 5 : 1, the targeted sizes calculated from the classification voltage applied to the LPDMA at 160 Torr are found to be in good correlation with the count mean Feret diameter obtained from the TEM observation of the particles collected after a classification ranging from 6 to 25 nm, although the targeted sizes set by the LPDMA were approximately 15% greater than the count mean Feret diameter measured by the TEM after classification. The geometric standard deviations of DMA-classified particles measured by TEM and those obtained from the tandem DMA method ranged from 1.08 to 1.17 and from 1.05 to 1.13, respectively. They were slightly greater than the ideal geometric standard deviations (1.05) of the particles classified with the LPDMA, which was calculated by neglecting the broadening effects due to Brownian diffusion. We experimentally demonstrated the validity of our LPDMA system for size measurements and classification of the nanometer-sized particles under low pressure conditions.     

Microdeformation behavior in nanotemplated epoxy thermosets: A study with in situ tensile deformation technique in transmission electron microscopy

Microdeformation behavior in nanostructured block copolymer‐toughened epoxy resins, or templated epoxy thermosets, was studied using an in situ tensile deformation technique performed directly in a transmission electron microscope. The observed microdeformation modes were found to correlate well with the macroscopic mechanical properties of the materials. In the order of decreasing macroscopic fracture toughness, the microdeformation modes were observed to change from large uniform plastic deformation over an extensive area, to localized plastic deformation bands, to little plastic deformation observed in the most brittle material. A similar trend was also observed when samples of the same material were tested at different temperatures, reflecting changes in the deformation mechanism as a function of temperature. Structural defects were observed in nanotoughening phases when plastic deformation was observed. The implication of the observed microdeformation modes to the macroscopic toughening mechanisms is discussed in the context of the micromorphology of the nanometer sized toughening phases and parameters of the epoxy matrix chemistry such as bromination, molecular weight, and interfacial miscibility. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 393–406, 2009     

A variable-gain radiating horn using groove guide

A radiating horn of continuously variable gain using groove-guide is proposed. The beam width in both planes is varied. Some experimental measurements at 100 GHz confirm the behaviour.Work carried out at the University of Wales Institute of Science and Technology, Cardiff, U.K.     

Interfacial structure of oxidized inner pores in precursor-derived Si–C–N ceramics

Inner pore channels were commonly found in precursor-derived Si–C–N ceramics. After annealing in air at 1420 °C, their oxidation structures were investigated by analytical TEM. A carbon-rich ring was frequently observed under the silica layer inside the pore channels, which consisted of graphite-like clusters in size of 20–30 nm. Origin of such interfacial structure is due to the excessive free-carbon in the amorphous Si–C–N matrix that had survived the oxidation process. This graphitic interface could further improve the oxidation resistance of the SiO₂ over-layer. This novel interfacial structure was also found by annealing in N₂, reaffirming the effect of composition of Si–C–N matrix.     

Toxic effect of triphenyltin chloride on the alga Spirulina subsalsa

A previous study on the deleterious effect of triphenyltin chloride (TPTCl) on the alga Spirulina subsalsa reported on four physiological and biochemical indices (or parameters): growth rate, chlorophyll content, phycocyanin content and nitrate reductase activity. In the present study, further research was performed to confirm the findings reported in the previous paper, using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The SEM images show significant changes in the screw‐pitch of S. subsalsa, suggesting that TPTCl may damage the inheritance characteristics of S. subsalsa. The TEM images illustrate that the external pectin theca, limiting membrane and inter photosynthetically active lamella in the S. subsalsa cell are those targets that can be easily damaged. Reversible and irreversible cell damage (cell necrosis) are also observed. Copyright © 2002 John Wiley & Sons, Ltd.     

Effect of Oxide Coverage on the Growth of Amorphous Al2Pt Phase on an Al Surface

 In the present experiments the high temperature successive deposition (HTSD) of Al and Pt and the half shadowing technique producing wedge shaped area with increasing quantity of deposited Pt are applied for studying the initial stages of solid phase reaction producing amorphous Al₂Pt phase. The nucleation of Al₂Pt phase results in a decoration pattern which could be related to the characteristic local oxide coverage of the Al crystal surface developing by kinetic segregation of oxygen species during the Al film deposition. In the area of larger amount of deposited Pt, where the Al₂Pt phase is continuous Kirkendall voids are present. The samples were investigated in plane by transmission electron microscopy (TEM) and selected area electron diffraction (SAED) and analysed by energy dispersive X-ray spectroscopy (EDX).     

主三镜一体化离轴三反光学天线设计

为提高空间激光通信离轴三反光学天线的装调效率,需要对反射镜总的装调自由度进行优化设计。基于共轴三反无焦系统的设计原理,提出一种主三镜一体化的设计方法,并推导了光学系统结构参数之间的关系,利用Zemax光学软件设计了一种结构紧凑、主三镜一体化的离轴三反光学天线。设计结果表明:全视场光学像质优于衍射极限,主镜和三镜空间位置相接近,可共母板加工和面形共基准检测,为主三镜的一体化加工提供了方法。光学天线的装调自由度减少了6个,降低了装调难度,提高了装调效率。     

In-situ TEM observation of the evolution of helium bubbles in Mo during He+ irradiation and post-irradiation annealing

The evolution of helium bubbles in purity Mo was investigated by in-situ transmission electron microscopy (TEM) during 30 keV He⁺ irradiation (at 673 K and 1173 K) and post-irradiation annealing (after 30 keV He⁺ irradiation with the fluence of 5.74×10¹⁶ He⁺/cm² at 673 K). Both He⁺ irradiation and subsequently annealing induced the initiation, aggregation, and growth of helium bubbles. Temperature had a significant effect on the initiation and evolution of helium bubbles. The higher the irradiation temperature was, the larger the bubble size at the same irradiation fluence would be. At 1173 K irradiation, helium bubbles nucleated and grew preferentially at grain boundaries and showed super large size, which would induce the formation of microcracks. At the same time, the geometry of helium bubbles changed from sphericity to polyhedron. The polyhedral bubbles preferred to grow in the shape bounded by {100} planes. After statistical analysis of the characteristic parameters of helium bubbles, the functions between the average size, number density of helium bubbles, swelling rate and irradiation damage were obtained. Meanwhile, an empirical formula for calculating the size of helium bubbles during the annealing was also provided.     

Precipitates originating from tungsten crucible parts in AlN bulk crystals grown by the PVT method

In order to evaluate the possible involvement of crucible materials in the growth of AlN bulk crystals grown by physical vapor transport, we applied growth conditions with a high vertical thermal gradient and hence high supersaturation of aluminum vapor. Under these conditions, precipitates formed causing diffuse grayish substructures at the initial growth interface and in the crystal body, decorating dislocations. Electron microscopy studies revealed that the precipitates are elongated, single‐phase particles with sizes of 50–500 nm of commensurate structure, oriented along the <110> direction. Chemical analysis of the precipitates showed tungsten as well as carbon and oxygen. The lattice parameters of the precipitates are in close agreement to hexagonal tungsten hemicarbide (W₂C). The possible transport from the tungsten parts and its conversion into tungsten hemicarbide precipitates is discussed. We thus conclude that the W₂C precipitates may contribute to the decoration of dislocations, even in growth with moderate thermal gradients.     

High resolution detection of high mass proteins up to 80,000 Da via multifunctional CdS quantum dots in laser desorption/ionization mass spectrometry

CdS quantum dots (∼5 nm) are used as multifunctional nanoprobes as an effective matrix for large proteins, peptides and as affinity probes for the enrichment of tryptic digest proteins (lysozyme, myoglobin and cytochrome c) in laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS). The use of CdS quantum dots (CdS QDs) as the matrix allows acquisition of high resolution LDI mass spectra for large proteins (5000-80,000 Da). The enhancement of mass resolution is especially notable for large proteins such as BSA, HSA and transferrin (34-49 times) when compared with those obtained by using SA as the matrix. This technique demonstrates the potentiality of LDI-TOF-MS as an appropriate analytical tool for the analysis of high-molecular-weight biomolecules with high mass resolution. In addition, CdS QDs are also used as matrices for background-free detection of small biomolecules (peptides) and as affinity probes for the enrichment of tryptic digest proteins in LDI-TOF-MS.