A two-point calibration method for quantifying organic binary mixtures using secondary ion mass spectrometry in the presence of matrix effects

Quantification of the composition of binary mixtures in secondary ion mass spectrometry (SIMS) is required in the analyses of technological materials from organic electronics to drug delivery systems. In some instances, it is found that there is a linear dependence between the composition, expressed as a ratio of component volumes, and the secondary ion intensities, expressed as a ratio of intensities of ions from each component. However, this ideal relationship fails in the presence of matrix effects and linearity is observed only over small compositional ranges, particularly in the dilute limits. In this paper, we assess an empirical method, which introduces a power law dependence between the intensity ratio and the volume fraction ratio. A previously published physical model of the organic matrix effect is employed to test the limits of the method and a mixed system of 3,3′-bis(9-carbazolyl) biphenyl and tris(2-phenylpyridinato)iridium (III) is used to demonstrate the method. This paper introduces a two-point calibration, which determines both the exponent in the power law and the sensitivity factor for the conversion of ion intensity ratio into volume fraction ratio. We demonstrate that this provides significantly improved accuracy, compared with a one-point calibration, over a wide compositional range in SIMS quantification and with a weak dependence on matrix effects. Because the method enables the use of clearly identifiable secondary ions for quantitative purposes and mitigates commonly observed matrix effects in organic materials, the two-point calibration method could be of significant benefit to SIMS analysts.     

Recent Progress in High-Performance Lithium Sulfur Batteries: The Emerging Strategies for Advanced Separators/Electrolytes Based on Nanomaterials and Corresponding Interfaces

Lithium-sulfur (Li−S) batteries, possessing excellent theoretical capacities, low cost and nontoxicity, are one of the most promising energy storage battery systems. However, poor conductivity of elemental S and the “shuttle effect” of lithium polysulfides hinder the commercialization of Li−S batteries. These problems are closely related to the interface problems between the cathodes, separators/electrolytes and anodes. The review focuses on interface issues for advanced separators/electrolytes based on nanomaterials in Li−S batteries. In the liquid electrolyte systems, electrolytes/separators and electrodes system can be decorated by nano materials coating for separators and electrospinning nanofiber separators. And, interface of anodes and electrolytes/separators can be modified by nano surface coating, nano composite metal lithium and lithium nano alloy, while the interface between cathodes and electrolytes/separators is designed by nano metal sulfide, nanocarbon-based and other nano materials. In all solid-state electrolyte systems, the focus is to increase the ionic conductivity of the solid electrolytes and reduce the resistance in the cathode/polymer electrolyte and Li/electrolyte interfaces through using nanomaterials. The basic mechanism of these interface problems and the corresponding electrochemical performance are discussed. Based on the most critical factors of the interfaces, we provide some insights on nanomaterials in high-performance liquid or state Li−S batteries in the future.     

An infrared small target detection algorithm based on high-speed local contrast method

Small-target detection in infrared imagery with a complex background is always an important task in remote sensing fields. It is important to improve the detection capabilities such as detection rate, false alarm rate, and speed. However, current algorithms usually improve one or two of the detection capabilities while sacrificing the other. In this letter, an Infrared (IR) small target detection algorithm with two layers inspired by Human Visual System (HVS) is proposed to balance those detection capabilities. The first layer uses high speed simplified local contrast method to select significant information. And the second layer uses machine learning classifier to separate targets from background clutters. Experimental results show the proposed algorithm pursue good performance in detection rate, false alarm rate and speed simultaneously.     

基于PLC的环境模拟系统温度控制算法的研究与实现

针对环境模拟试验温度控制系统中被控对象存在的非线性、时滞等特点,本文采用区间限幅PID控制算法和模糊PID控制算法对传统控制方法进行了改进。首先为了解决模拟量三通粗调阀调节缓慢的缺点,建立了区间限幅PID控制算法的控制规则表,并将其在PLC中实现。其次提出用模糊PID控制算法来解决电加热器的非线性、大时滞性问题,并结合实际控制经验建立了模糊控制规则表,然后将模糊PID控制算法在PLC中进行实现。最后将限幅PID和模糊PID控制算法应用于某大型环境模拟试验控制系统,实验结果表明利用改进算法对温度控制具有良好的稳定性及精确度。     

微小型组合导航系统软硬件协同设计

针对机载制导武器对组合导航系统小体积、低功耗、高实时性以及高可靠性的要求,设计了组合导航系统双CPU总体方案。基于Zynq全可定制平台搭建了组合导航系统硬件环境。在分析组合导航系统软件结构的基础上,对任务块、任务优先级以及任务间的同步机制进行了合理设计;同时基于对组合导航滤波器内数据交换的分析,通过设置消息队列实现了任务间通信,且在保证数据一致性的同时,避免了“死锁”问题的出现。     

基于单神经元PID控制器的压电陶瓷控制方法

卫星地面综合测试是卫星研制过程中的重要环节,对系统功能验证及性能评估具有重要作用。传统的卫星地面综合测试系统存在研制周期长、投入较大、自动化流程不够完整、可重用性较差等不足。而北斗导航卫星地面综合测试系统采用分布式、高实时性、可配置、多主机的集成体系结构,是集计算机通讯、实时控制、实时数据处理、事后分析等功能于一体的测试系统,适用于从卫星总装集成到发射各个阶段的电气测试。通过卫星系统级的各项接口、功能、性能指标测试,表明该系统满足支持系统论证、状态确认、问题排查等测试需求,有力支撑了北斗导航卫星的成功发射和在轨运行。     

基于非同步替代光谱定标的地表下垫面影响分析

对760nm附近的氧气吸收带,选用植被、枯萎植被、人工地物、沙地和雪地五种典型地表类型,基于模拟数据进行非同步替代光谱定标方法的误差分析,比较不同地表类型得到的光谱定标准确度,为高光谱成像仪的非同步替代光谱定标提供定标图像选择策略.结果表明:运用两种光谱匹配方法——光谱角度匹配和欧氏距离法得到的定标误差基本一致;730~800nm的地表反射率曲线标准差在0.05nm以内时,定标误差集中在±0.5nm范围内;人工地物类型中个别地物如橄榄绿光泽涂料和植被大面积覆盖的图像数据不适合用于非同步替代光谱定标.     

光栅投影相位法系统模型及标定方法

本文针对传统投影光栅相位法的光学三角法模型进行了改进,采用直入射光路并配合使用一种简便易行的标定方法,只需使用相移公式求取相位差,而不会引入与系统几何位置关系有关的量,简化了求取高度矩阵的要求。实验结果表明,新系统模型精度良好,测量误差为0.107 mm。采用该模型和标定方法可以克服传统方法系统模型的局限性,最大限度减少误差源并提高抗干扰性。     

天文/卫星组合点校捷联惯性导航系统算法研究

捷联式惯性导航系统通常采用卫星导航系统的位置、速度信息对惯导解算误差进行校正,但对于水下载体惯性导航系统而言,由于只能获得点位置信息,对惯导的校正精度以及校正参量有限。针对上述问题,提出了基于天文/卫星组合校正捷联式惯导技术,通过卫星精确定位信息和天文快速观测信息,全面修正惯导系统误差、提高导航精度。仿真结果表明,基于天文/卫星组合校正算法对惯导进行校正,相对于传统校正算法精度可提高约50%。     

多组分烟用香精定量分析方法的研究进展

综述了近年来烟用香精、香料各组分化合物的定量分析方法的研究进展。面积归一化法、内标法、外标法和标准加入法等常用色谱定量分析方法主要用于烟用香精、香料中目标化合物或单个组分的测定;多标定量法、特征峰-内标定量法和多元校正法能深入剖析烟用香精复杂体系中各组分含量(引用文献48篇)。