Use of the EUR LiB 15/5 data set for radiation shielding calculations in iron

Abstract

The shielding effect of an iron sphere assembly has been tested for a Pu-α-Be neutron source placed in the center of the shield assembly. Emergent neutron and gamma spectra were measured with a stilbene scintillation counter. Discrimination between neutrons and gammas was achieved by the pulse shape discrimination technique based on the zero crossing method. Calculations have been made using the one-dimensional transport code ANISN-Westinghouse version (ANISN-W) and the EUR LiB 15/5 cross section data set. The agreement between measurements and calculations indicates that the cross section set and the calculation model are suitable for studying the iron shielding experiments over the neutron energy range 1.35–10 MeV and the gamma energy range 0.3–6 MeV. Total macroscopic cross sections for fast neutrons, linear attenuation coefficients for gamma rays and half-value thicknesses for neutrons and gammas for the whole energy range and at different energies have been obtained.     

甲基环己烷在9∽15.5 eV能量区的真空紫外光电离研究

利用具有同步辐射源的反射式飞行时间质谱仪,研究甲基环己烷的真空紫外光电离和光解离. 观测到母体离子C₇H₁₄⁺和碎片离子C₇H₁₃⁺,C₆H₁₁⁺,C₆H₁₀⁺,C₅H₁₀⁺,C₅H₉⁺,C₄H₈⁺,C₄H₇⁺和C₃H₅⁺的光电离效率曲线. 测定甲基环己烷的电离能为9.80±0.03 eV,通过光电离效率曲线确定其碎片离子的出现势. 在B3LYP/6-31G(d)水平上对过渡态、中间体和产物离子的优化结构进行表征,并使用G3B3方法计算其能量. 提出主要碎片离子的形成通道. 分子内氢迁移和碳开环是甲基环己烷裂解途径中最重要的过程.     

Reaction mechanism of ammonia oxidation over RuO2(1 1 0): A combined theory/experiment approach

Combining state-of-the-art density functional theory (DFT) calculations with high resolution core level shift spectroscopy experiments we explored the reaction mechanism of the ammonia oxidation reaction over RuO₂(1 1 0). The high catalytic activity of RuO₂(1 1 0) is traced to the low activation energies for the successive hydrogen abstractions of ammonia by on-top O (less than 73 kJ/mol) and the low activation barrier for the recombination of adsorbed O and N (77 kJ/mol) to form adsorbed NO. The NO desorption is activated by 121 kJ/mol and represents therefore the rate determining step in the ammonia oxidation reaction over RuO₂ (1 1 0).     

Investigation of nanostructured Fe3O4 polypyrrole core-shell composites by X-ray absorbtion spectroscopy and X-ray diffraction using synchrotron radiation

In this article, we focus on the structural peculiarities of nanosized Fe₃O₄ in the core-shell nanocomposites obtained by polymerization of conducting polypyrrole shell around Fe₃O₄ nanoparticles. The local structure of Fe atoms was determined from the Extended X-ray Absorption Fine Structure analysis using our own package computer programs. An X-ray diffraction method that is capable to determine average particle size, microstrains, as the particle size distribution of Fe₃O₄ nanoparticles is presented. The method is based on the Fourier analysis of a single X-ray diffraction profile using a new fitting method based on the generalized Fermi function facilities. The crystallites size obtained by X-ray diffraction spectra analysis was estimated between 3.2 and 10.3 nm. Significant changes in the first and the second Fe coordination shell in comparison with standard bulk were observed. The global and local structure of the nanosized Fe₃O₄ are correlated with the synthesis conditions of the core-shell polypyrrole nanocomposites.     

Radiation damage from EELS and NEXAFS in diesel soot and diesel soot extracts

Carbon NEXAFS and EELS spectra of soot, and NEXAFS spectra of soot extracts, are presented. The EELS spectra of solid soot particles from a TEM-EELS show fewer structures than the corresponding NEXAFS spectra obtained at two different synchrotron beamlines. We attribute radiation damage in the TEM-EELS to the failure at resolving structures of surface functional carbon groups in or on soot. NEXAFS spectra of soot extracts studied with a scanning transmission X-ray microscope show alterations during X-ray exposure, which can be explained by a simple chemical model where oxygen apparently reacts with the sample. When the same extract is studied in an ultrahigh-vacuum beamline, no such alterations are observed.     

远紫外像增强器光谱响应特性研究

利用星载光学仪器对极光在远紫外波段进行形态探测是研究沉降粒子能量等空间环境参数的重要手段,而远紫外像增强器是进行空间极光远紫外形态探测仪器中所必不可少的光电成像器件,其性能的优劣将直接影响整个仪器的工作情况,其中光谱响应特性是像增强器的重要的特性之一。采用同步辐射真空紫外波段光作为光源,利用光电倍增管和硅光二极管分别测量同步辐射和像增强器光强,我们对研制的远紫外像增强器在135～250 nm波段范围进行了光谱响应测试,测试结果表明该器件在140～190 nm范围内有较好的响应,响应峰值在160 nm左右,符合远紫外极光成像探测的应用要求。     

Controlled Space Radiation concept for mesh-free semi-analytical technique to model wave fields in complex geometries

Numerical modelling of the ultrasonic wave propagation is important for Structural Heath Monitoring and System Prognosis problems. In order to develop intelligent and adaptive structures with embedded damage detector and classifier mechanisms, detailed understanding of scattered wave fields due to anomaly in the structure is inevitably required. A detailed understanding of the problem demands a good modelling of the wave propagation in the problem geometry in virtual form. Therefore, efficient analytical, semi-analytical or numerical modelling techniques are required. In recent years a semi-analytical mesh-free technique called Distributed Point Source Method (DPSM) is being used for modelling various ultrasonic, electrostatic and electromagnetic wave field problems. In the conventional DPSM approach point sources are placed along the transducer faces, problem boundaries and interfaces to model incident and scattered fields. Every point source emits energy in all directions uniformly. Source strengths of these 360° radiation sources are obtained by satisfying interface and boundary conditions of the problem. In conventional DPSM modelling approach it is assumed that the shadow zone does not require any special consideration. 360° Radiation point sources should be capable of properly modelling shadow zones because all boundary and interface conditions are satisfied. In this paper it is investigated how good this assumption is by introducing the ‘shadow zone’ concept at the point source level and comparing the results generated by the conventional DPSM and by this modified approach where the conventional 360° radiation point sources are replaced by the Controlled Space Radiation (CSR) sources.     

Swelling and structure of radiation induced near-surface damage in CR-39 and its chemical etching

Systematic measurements of swelling of CR-39 nuclear track detector (NTD) due to irradiation with fission fragments and alpha particles over a wide range of fluences from ²⁵²Cf are presented here. Precisely designed and optimized exposure and chemical etching experiments were employed to unfold the structure of radiation induced surface damage. Delays in the startup of the chemical etching of latent tracks in low radiation fluence detectors are measured and are found to contain important information about structure of the surface damage. Simple atomic scale pictures of radiation induced surface damage and its chemical etching are developed using measurements of radiation induced swelling of CR-39 detectors and nuclear track parameters. The computer code SRIM2010 was utilized for the calculations of basic features of latent tracks of fission fragments and alpha particles in CR-39. Another computer code TRACK_VISION was used to compute parameters of etched tracks. Computations and experimental findings in the paper coherently compose a realistic picture of radiation damage.     

Oxidation of Zn in UHV environment at low temperature

Thermal oxidation of polycrystalline Zn foils at 5 × 10⁻⁷ Torr oxygen pressure and at room temperature, 50 °C, 70 °C, 90 °C and 110 °C was studied. In situ photoemission spectroscopy using synchrotron light with photon energy of 57 eV was used to monitor the formation of ZnO and to determine the thickness of the oxide overlayer. At the initial oxidation, the oxidation rate follows a two-stage logarithmic equation and later trends to saturate at a certain thickness depending on the oxidation temperature. The saturated thickness was found to increase with the oxidation temperature. The two-stage oxidation process may be governed by two kinds of space charge presumably formed in the thin oxide overlayer.     

Attenuation of shock waves propagating over arrayed baffle plates

The paper reports results of shock tube experiments of the attenuation of shock waves propagating over arrayed baffle plates, which is motivated to simulate shock wave attenuation created accidentally at the acoustic delay line in synchrotron radiation factory upon the rupture of a metal membrane separating the acceleration ring at high vacuum and atmospheric test chambers. Experiments were carried out, by using double exposure holographic interferometry with double path arrangement, in a 100 mm×180 mm shock tube equipped with a test section of 180 mm×1100 mm view field. Two baffle plate arrangements were tested: Oblique and staggered baffle plates; and vertical symmetric ones. Pressures were measured along the shock tube sidewall at individual compartments for shock Mach numbers ranging from 1.2 to 3.0 in air. The results were compared with a numerical simulation. The rate of shock attenuation over these baffle plates was compared for vertical and oblique baffle plates. Shock wave attenuation is more pronounced in the oblique baffle plate arrangements than in the vertical ones. PACS 47.40.Nm; 42.40.Kw Communicated by C. Needham