Determination of trace impurities in boron nitride by graphite furnace atomic absorption spectrometry and electrothermal vaporization inductively coupled plasma optical emission spectrometry using solid sampling

Two digestion-free methods for trace analysis of boron nitride based on graphite furnace atomic absorption spectrometry (GFAAS) and electrothermal vaporization inductively coupled plasma spectrometry optical emission (ETV-ICP-OES) using direct solid sampling have been developed and applied to the determination of Al, Ca, Cr, Cu, Fe, Mg, Mn, Si, Ti and Zr in four boron nitride materials in concentration intervals of 1–23, 54–735, 0.05–21, 0.005–1.3, 1.6–112, 4.5–20, 0.03–1.8, 6–46, 38–170 and 0.4–2.3 μg g^− 1, respectively. At optimized experimental conditions, with both methods, effective in-situ analyte/matrix separation was achieved and calibration could be performed using calibration curves measured with aqueous standard solutions. In solid sampling GFAAS, before sampling, the platform was covered with graphite powder and, for determination of Si, also the Pd/Mg(NO₃)₂ modifier was used. In the determination of all analyte elements by solid sampling ETV-ICP-OES, Freon R12 was added to argon carrier gas. For solid sampling GFAAS and ETV-ICP-OES, the achievable limits of detection were within 5 (Cu)–130 (Si) ng g^− 1 and 8 (Cu)–200 (Si) ng g^− 1, respectively. The results obtained by these two methods for four boron nitride materials of different purity grades are compared each with the other and with those obtained in analysis of digests by ICP-OES. The performance of the two solid sampling methods is compared and discussed.     

A Self‐Sampling‐and‐Flow Biosensor for Continuous Monitoring

A self‐sampling‐and‐flow biosensor was fabricated by sandwiching a nitrocellulose strip on the working electrode side of the double‐sided microporous gold electrodes and a wicking pad on the counter electrode side. The double‐sided microporous electrodes were formed by plasma sputtering of gold on a porous nylon substrate. Sample was taken up to the enzyme‐immobilized working electrode by the capillary action of the front nitrocellulose strip dipped into the sample solution, analyzed electrochemically at the enzyme‐immobilized electrode, and diffuses out to the backside wicking pad through the micropores of the electrodes, constituting a complete flow cell device with no mechanical liquid‐transporting device. Biosensor was formed by co‐immobilizing the glucose oxidase and electron transfer mediator (ferrocene acetic acid) on the thioctic acid self‐assembled monolayer‐modified working electrode. A typical response time of the biosensor was about 5 min with the sensitivity of 2.98 nA/mM glucose, providing linear response up to 22.5 mM. To demonstrate the use of self‐sampling‐and‐flow biosensor, the consumption rate of glucose in the presence of yeast was monitored for five days.     

Determination of airborne isocyanates as di-n-butylamine derivatives using liquid chromatography and tandem mass spectrometry

A method for the determination of isocyanates as di-n-butyl amine (DBA) derivatives using tandem mass spectrometry (MS/MS) and electrospray ionisation (ESI) is presented. Multiple-reaction monitoring (MRM) of the protonated molecular ions and corresponding deuterium-labelled d₉-DBA derivatives resulted in selective quantifications with correlation coefficients >0.998 for the DBA derivatives of isocyanic acid (ICA), methyl isocyanate (MIC), ethyl isocyanate (EIC), propyl isocyanate (PIC), phenyl isocyanate (PhI), 1,6-hexamethylene diisocyanate (HDI), 2,4-, 2,6-toluene diisocyanate (TDI), isophorone diisocyanate (IPDI), 4,4′-methylenediphenyl diisocyanate (MDI), 3-ring MDI, 4-ring MDI, HDI-isocyanurate, HDI-diisocyanurate, HDI-biuret and HDI-dibiuret. The instrumental precision for 10 repeated injections of a solution containing 0.1 μg ml⁻¹ of the studied derivatives was <2%. Performing MRM of the product ion [DBA + H]⁺ (m/z = 130) from the protonated molecular ion resulted in the lowest detection limits, down to 10 amol (for TDI). Quantification of concentrations below 10⁻⁶ of the occupational exposure limit (OEL) for TDI during 10 min of air sampling was made possible. In an effort to control the formation of alkali adducts, addition of lithium acetate to the mobile phase and monitoring of lithium adducts was evaluated. Having lithium present in the mobile phase resulted in complete domination of [M + Li]⁺ adducts, but detection limits for the studied compounds were not improved. Different deuterium-labelled derivatives as internal standards were evaluated. (1) DBA derivatives of deuterium-labelled isocyanates (d₄-HDI, d₃-2,4-TDI, d₃-2,6-TDI and d₂-MDI), (2) d₉-DBA derivatives of the corresponding isocyanates and (3) d₁₈-DBA derivatives of the corresponding isocyanates. An increase in number of deuterium in the molecule of the internal standard resulted in an increase in instrumental precision and a decrease in correlation within calibration series.     

Determination of aliphatic amines in air by membrane enrichment directly coupled to a gas chromatograph

Summary A method is described for the determination of shortchain aliphatic amines in ambient air based on impinger sampling in dilute H₂SO₄, selective enrichment across a PTFE gas membrane and quantification by gas chromatography. The enrichment step is carried out in a flow system directly connected to the chromatograph. The separation is performed on a packed column with nitrogen selective detection. The enrichment per sample volume was in the range 7.3 to 8.2 mL^–1 for C₁–C₆ amines. Detection limits were ca 3–10 nM with enrichment of a 2.9 mL liquid sample. After impinger sampling of 5 m³ air in 10 mL absorption solution, this corresponds, to 0.4–0.8 ng/m³ (ca 0.2–0.5 ppt by volume) in air.     

N-Heterocyclic carbene-palladium complex on polystyrene resin surface as polymer-supported catalyst and its application in Suzuki cross-coupling reaction

A poly(imidazoliummethyl styrene)-surface grafted-polystyrene resin was prepared by suspension polymerization. This was used as the polymer-supported carbene precursor for the palladium complex, which efficiently catalyzed the Suzuki cross-coupling of aryl halides and phenylboronic acid.     

Measurement of unbound cocaine in blood, brain and bile of anesthetized rats using microdialysis coupled with liquid chromatography and verified by tandem mass spectrometry

To investigate the disposition of unbound cocaine in the rat blood, brain and bile, we demonstrate an in vivo multiple sampling microdialysis system coupled with liquid chromatography for cocaine assay and verified by tandem mass spectrometry. Three microdialysis probes were concurrently inserted into the jugular vein, bile duct and brain striatum of each anesthetized rat. After a period of 2 h post-surgical stabilization, cocaine (10 mg kg(-1)) was administered through the femoral vein. Separation of unbound cocaine from various biological fluids was applied to a reversed-phase C(18) column (250 x 4.6 mm I.D., 5 microm). The mobile phase consisted of acetonitrile--10 mm potassium dihydrogen phosphate buffer (25:75, v/v, pH 4.0) and 0.8% diethylamine at a flow rate of 1 mL min(-1). The UV detector wavelength was set at 235 nm. The results indicate that cocaine penetrates the blood--brain barrier with a rapid distribution. However, unbound cocaine in the bile dialysate was not detectable in the UV detection. We therefore use LC--tandem mass spectrometry to detect the bile fluid after cocaine administration (3 mg kg(-1), i.v.). The results indicate that cocaine goes through hepatobiliary excretion.     

Detection of ethanol in human body fluids by headspace solid-phase micro extraction (SPME)/capillary gas chromatography

Summary Ethanol has been found extractable from human whole blood and urine samples by headspace solid-phase micro extraction (SPME) with a Carbowax/divinylbenzene-coated fiber. After heating a vial containing the body fluid sample with ethanol, and isobutanol as internal standard (IS) at 70°C in the presence of (NH₄)₂SO₄, a Carbowax/divinylbenzene-coated SPME fiber was exposed in the headspace of the vial to allow adsorption of the compounds. The fiber needle was then injected into a middle-bore capillary gas chromatography (GC) port. The headspace SPME-GC gave intense peaks for both compounds; a small amount of background noises appeared, but did not interfere with the detection of the compounds. Recoveries of ethanol and IS were 0.049 and 0.026% for whole blood, respectively, and 0.054 and 0.085% for urine, respectively. The calibration curves for ethanol showed excellent linearity in the range of 80–5000 mg L^–1 for whole blood and 40–5000 mg L^–1 for urine; the detection limits for both samples were 20 and 10 mg L^–1, respectively. The data on actual determination of ethanol after the drinking of beer are also presented for two subjects.     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

二次乳化法(W/O)/W制备蛋白质流通色谱固定相的研究

以甲基丙烯酸缩水甘油酯为单体,二甲基丙烯酸乙二醇酯为交联剂,甲苯与正庚烷为有机致孔剂,20%的甘油水溶液为内水相(超孔致孔剂),利用二次乳化法制备了(W/O)/W乳液,通过紫外光引发悬浮聚合生成两类孔型高分子微球(BiPB).BiPB孔径为双峰分布,范围分别在10~100nm和1000~7300nm之间;而其体积平均粒径、比表面积、湿密度、静态吸附容量与不含超孔的微孔介质(MiPB)接近.修饰相同二乙胺密度的BiPB和MiPB介质虽在较低流速(5cm/min)下有相近的动态吸附容量,但在高流速(40cm/min)下BiPB的动态吸附容量约为MiPB的动态吸附容量的3倍,表明BiPB介质的超孔结构对孔内传质的强化作用,因而其更适合于高速的蛋白质色谱分离.     

Freon (CHF<Subscript>3</Subscript>)-assisted atomization for the determination of titanium using ultrasonic slurry sampling–graphite furnace atomic absorption spectrometry (USS–GFAAS): a simple and advantageous method for solid samples

A simple and advantageous method for the determination of titanium using graphite furnace atomic absorption spectrometry with slurry sampling has been developed. Titanium is one of the refractory elements that form thermally stable carbides in the graphite tube, which leads to severe memory effects. Trifluoromethane (Freon-23) was applied in the purge gas during the atomization step or alternatively just prior to the atomization to successfully eliminate the problems of carbide formation and increase the lifetime of the furnace tube which could be used for more than 600 heating cycles. A flow rate of 40 mL min^–1 (5% of Freon in argon) was used to obtain symmetrical peaks with no tailing. However, when the gas flow rate was too high (250 mL min^–1) the peak-tailing and memory effects reappeared. Ti was determined in various materials covering a wide range of concentrations, from 2.8 g g^–1 to 12% (m/m) Ti. The accuracy of the method was confirmed by analyzing certified reference materials (CRMs) or by comparing the results with those obtained using inductively coupled plasma–atomic emission spectrometry (ICP–AES) after decomposition of the samples. The materials analyzed were soil, plant, human hair, coal, urban particulate matters, toothpaste, and powdered paint.