Enhancement of pupil-masked wavelength-scale gas-filled flat acoustic lens based on anomaly apodization effect

In this letter, the improvement in focus by the use of a pupil mask produced in an acoustic mesoscale cuboid particle filled with CO₂ is reported. Thereby, the result shows that the pupil mask increases the sound intensity and also increases the resolution (or a reduction of the full width at half maximum, FWHM) in focus compared to the non-masked one. These results are important because they confirm the effect of abnormal amplitude apodization for a one-wavelength dimension acoustic lens and demonstrate that it is possible to improve sound focusing of a cuboid gas-filled lens with one wavelength dimension. This is the smallest size of an acoustic lens ever considered in this type of literature, with side dimensions of the cube equal to one wavelength and a diameter to focus ratio of 2.5, the sound amplification in focus is 5.4 dB at 4125 Hz, with the resolution near to the diffraction limit.     

基于深度约束的声速估算方法*

高精度的声速剖面数据是提高水下定位精度的关键。在无法精确获得声速剖面数据的情况下,该文提出了一种基于深度约束,同时根据浮标与水下目标的空间几何距离进行有效声速估算的方法。通过仿真模拟,将该文提出的方法与加权平均声速法、泰勒级数展开法和等效声速剖面法的定位结果进行对比分析。结果表明,新方法不需要依靠声速剖面数据,通过深度约束可有效地估算出声速值,其定位精度与等效声速结果相当,极大地提高了无声速剖面数据下的水下定位精度。     

膨胀腔类超材料的传递损失研究*

声学超材料及结构已被广泛研究,其超结构通常利用3D打印技术实现,当结构刚度较小或者面积较大时,由声固耦合所导致的声学效果与设计不符的情况广泛存在。本文针对含有膨胀腔类的超材料,研究了声固耦合对其声学性能的影响,采用有限元计算结合阻抗管实验的方法,得到其传递损失,分析了声固耦合现象对传递损失的影响。结果表明：薄壁膨胀腔结构的作用频率范围与只考虑声学理论计算的设计不符,声固耦合现象对传递损失产生显著影响;采用增加膨胀腔壁厚、减少膨胀腔内径或选择金属材料的方式,都可以使得声固耦合现象对传递损失的影响减小;仿真结果与实验结果基本吻合。该研究结果说明：对于膨胀腔类超材料,当刚度较小或者面积较大时,对其进行声固耦合分析是完全必要的。     

中国筝的声功率级测试

筝是中国古老的弹弦乐器。但迄今为止,对其声功率级一直未进行科学的测定。本文在一混响室内根据ISO及GB标准,对二十一弦筝的声功率级进行了首次测定。两位资深乐师在混响室内分别演奏各自的乐器,通过围绕乐师和乐器布置的四通道测试设备,对筝所辐射的声功率级和动态范围进行测定。测试结果表明,中国筝在以不同力度演奏单音、音阶和乐曲时所辐射的声功率级及其频率特性均有所不同。考虑到乐器演奏音阶时所辐射的声功率级及其动态范围与演奏乐曲时的声功率级接近,并且,音乐的空间感也大都在乐器以f力度演奏乐曲的强音标志乐段时最为显著,故此我们建议中国筝所辐射的声功率级用其以f力度演奏音阶时的平均声功率级表示。本文测试的两架中国筝以f力度演奏音阶时的平均声功率级为85.9dB。文中不仅首次公布了中国筝声功率级的测试结果,并且所介绍的测试方法对其它乐器声功率级测试也具有借鉴意义。民族乐器所辐射的声音性能的确定是民族音乐厅堂音质研究的基础。     

实验室隔声测量中试件洞填隙墙传声影响的检验

文章探讨了实验室建筑构件隔声测量中填隙墙传声影响的检验与修正方法。通过实验分析,给出了三种可用于不同隔声量构件的门、窗和玻璃试件隔声测量的填隙墙构造方式。     

用于超声悬浮场可视化的光学全息相位倍增方法研究

基于二次曝光全息干涉测量原理,采用四倍相位倍增光路对声悬浮声压场分布进行了可视化研究.拍摄了给定模式的超声悬浮场在不同超声换能器激励电流时的光学全息图并进行光学再现,由再现光波的全息干涉条纹图样得到了反映声压场分布的光波波前相位变化,并进行了对比分析.结果表明,与无相位倍增光路相比,采用四倍相位倍增光路可使同一声压场的全息干涉条纹数目大大增加,测量灵敏度明显提高,为进一步研究声悬浮场声压分布提供了一种有效方法.     

Sound propagation in soundproofing casement windows

Casement windows consisted of two wooden frames that can be opened and closed at various angles are widely used in developing countries with tropical climates. However, an annual increase in a number of motorcycles and automobiles and traffic noise level these countries have rendered these windows to be useless. In this paper, we present a model for manufacturing windows which are suitable for the developing tropical countries. These windows are capable of ventilating, regulating sunlight, protecting against coldness, and reducing traffic noise and fumes from motor vehicles. The ventilation and soundproofing unit hold an importance place in the design of the windows and are calculated using the wave equation and observations of higher-order mode waves. In order to maximize the soundproofing ability, the selection of size and placement of input and output openings in such a way that would minimize the effects of higher-order mode waves are considered in details.     

Numerical study on reduction of the elevated structure noise by surface absorption on plate girders

With the aim to propose a reasonable and effective countermeasure for the elevated structure noise, the sound field radiated by a steel plate girder, which is the main source of the elevated structure noise, have been theoretically analysed. In the present study, steel plate girders are modelled as infinitely long elastic plate strips placed in parallel and numerical examples on the sound field radiated by the steel plate girders are shown. In the analysis of the radiated sound field, the equivalent source method is employed. Effect of the surface absorption on the sound field radiated by the girders is discussed through numerical examples. The results show that the surface absorption is effective for reduction of the radiated sound field, especially in the area that increase of sound pressure due to reflection by adjacent plate girders is observed. Furthermore, to design for reasonable countermeasure, variation of the noise reduction effect due to changing the pattern of surface absorption area on plate girders is classified.     

Study on the effect of sound duration on the annoyance of helicopter noise by applying a technique of time compression and expansion of sound signals

The number of helicopter operations has rapidly increased during the last 20 years in Japan. Helicopter noise sounds different from other aircraft; the waveform of the sound pressure is impulsive and the signal duration is relatively long. The Environmental Agency of Japan implemented new guidelines for evaluating noise exposure around small airports, including heliports, in 1990. This study was executed in connection with the development of provisional guidelines. Psychoacoustic experiments were carried out to identify an evaluation index for helicopter noise. In order to examine the effect of duration independently, we not only used original sound recordings, but also synthesized sound signals. The durations of these sound signals were time compressed or expanded without degrading the quality of the original sound recording. The test results show that the effect of duration is significant, and that the A-weighted sound exposure level is a better index than the maximum A-weighted sound pressure level for the evaluation of helicopter noise.     

Evaluation of the acoustic performance of classrooms in public schools

This paper presents the results of an evaluation of acoustic comfort of classrooms built according to a standard design. Three constructive designs located in the metropolitan area of Curitiba (Brazil) have been evaluated, two schools built under each of these three designs, in a total of six schools. The acoustic quality of the classrooms have been analyzed based on measurements of the reverberation time, sound pressure level inside and outside the classrooms, and sound insulation. Measurements of ambient noise (external and internal) followed the Brazilian Standards NBR 10151 and NBR 10152. Measurement of reverberation time and sound insulation followed the international Standards ISO 140-4, ISO 140-5, ISO 717-1, and ISO 3382. Results (sound insulation and reverberation time) have been compared with reference values found in the Brazilian Standard NBR 1279, and in the Standards ANSI S12.60 and DIN 18041. Results reveal poor acoustical quality of the surveyed classrooms, for all 3 constructive designs studied. The surveyed designs do not meet the guidelines of either the Brazilian Standards or of the International Standards employed as references.