The effect of surfactants on the magnetic and optical properties of Co-doped SnO2 nanoparticles

A series of Co-doped SnO₂ nanoparticles have been synthesized by the co-precipitation route. Different amounts of surfactant have been used in order to study the effect of surfactants (CTAB) on the magnetic and optical properties. Structural analyses reveal that Co dopants are substituted into rutile SnO₂ nanoparticles without forming any secondary phase. The increase of the surfactant promotes the adsorption of organic molecules on the surfaces of nanoparticles. Meanwhile, both the ferromagnetism and the orange emission drop progressively. The dependence of ferromagnetic properties on the surfactant concentration could be explained based on the bound magnetic polaron, where the carriers are provided by oxygen vacancies. XANES spectra reveal that the electrons transfer from Co 3d bands to the surfactant ions. Such electron-transfer process suppresses the formation of oxygen vacancies and leads to the decline of the ferromagnetism and optical emission.     

Effect of β-cyclodextrin, surfactants and solvent on the reactions of the recently synthesized Schiff base and its Cu(II) complex with cyanide ion

The kinetic of the reactions of the recently synthesized Schiff base (PABST) and its complex with Cu(II) (Cu-PABST) with CN⁻ in a 30:70 (v/v) mixture of DMF:water was investigated at pH 6.0 and 10.0, respectively, using multivariate curve resolution alternative least squares (MCR-ALS) method. The effects of different parameters such as volume percent of DMF, pH and surfactants and β-cyclodextrin (β-CD), on observed rate constant of the reactions were investigated. Cetyltrimethylammonium bromide (CTAB) decreased the rate constant of PABST reaction and increased the rate constant of Cu-PABST reaction with CN⁻. Sodium dodecyl sulfate (SDS) and Triton X-100 decreased the rate constant of both reactions. Also the stability constant for the inclusion complexes of PABST and Cu-PABST, and observed rate constants for the reactions of β-CD-PABST and β-CD-Cu-PABST) with CN⁻ were determined. β-CD decreased the rate constant of PABST reaction with CN⁻ by protecting iminium groups of the Schiff base, while β-CD increased the rate constant of the reaction of Cu-PABST with CN⁻.     

Roles of oleic acid during micropore dispersing preparation of nano-calcium carbonate particles

In the present work, nano-calcium carbonate powder was prepared by micropore dispersion method with assistance of oleic acid as surfactant. CO₂ gas was dispersed into the Ca(OH)₂/H₂O slurry via a glass micropore-plate with the diameter of micropore about 20 μm. To investigate the effect of oleic acid on the size of CaCO₃ particles, different amount of oleic acid was added in Ca(OH)₂/H₂O slurry at 5 °C and 25 °C, respectively. XRD patterns show that cubic calcite is the only crystalline phase in all cases. ZPA data and TEM photo indicate that the average particle size synthesized at 5 °C without oleic acid is of about 40 nm, slightly smaller than that of prepared at 25 °C, and that the dispersity of sample prepared at 5 °C is better than that of 25 °C. When oleic acid is added in both temperatures, the average particle size decreases a little. FT-IR spectra demonstrate that oleic acid interacts with Ca²⁺ and carbon-carbon double bond existed on the surface of particle. Consequently, two opposite roles of oleic acid during the process of preparation of nano-CaCO₃ were proposed, namely preventing nanoparticles from growing during reaction and making nanoparticles reunite to a certain extent after reaction.     

Analysis of abuse drugs in urine using surfactant-assisted dispersive liquid-liquid microextraction

The process of surfactant-assisted dispersive liquid-liquid microextraction (SA-DLLME) followed by high-performance liquid chromatography-UV detection was successfully applied for the extraction and determination of selected cannabinoids (cannabidiol, Δ(9)-tetrahydrocannabinol, and cannabinol) in urine samples. The effective parameters on the extraction efficiency were studied and optimized utilizing two different optimization methods: one variable at a time (OVAT) and face center design (FCD). Under the optimum conditions (extraction solvent and its volume, toluene, 85 μL; disperser agent and its concentration, 1.0 mL of ultra-pure water containing 0.5 mmol/L tetradecyl tremethyl ammonium bromide (TTAB); sample pH, 2.0 and salt concentration, 11% w/v NaCl), the limits of detection of the method were in the range of 0.1-0.5 μg/L and the repeatability and reproducibility of the proposed method, expressed as relative deviation, varied between 4.1 and 8.5% and 6.7 and 11.6%, respectively. Linearity was found to be in the range of 1.0-200 μg/L and under the optimum conditions, the preconcentration factors (PFs) were between 190 and 292. This proposed method was successfully applied in the analysis of three male advocate urine samples and good recoveries were obtained.     

三乙醇胺月桂酸单酯的合成、表面活性及防雾性能

用等摩尔比的月桂酸和三乙醇胺为原材料合成了三乙醇胺月桂酸单酯,并对其酯化过程进行了优化,利用红外和核磁共振氢谱对其酯化产物进行了分析和表征．结果表明,三乙醇胺月桂酸单酯的产率高达69%,其在水溶液中的临界胶束浓度及表面张力分别为0.91 μg/mL和22.1 mN/m,其在低密度聚乙烯薄膜上的第一滴流滴时间和十滴流滴时间分别为257和86 s,高温持续期超150 h．     

The Synthesis of Hydrophobically Modified Water‐Soluble Polyzwitterionic Copolymers and Responsiveness to Surfactants in Aqueous Solution

Abstract

A novel zwitterionic surfactant monomer containing a carboxybetaine moiety and a 10 carbon aliphatic tail was synthesized and copolymerized with acrylamide to yield a water‐soluble, hydrophobically modified zwitterionic polymer [Poly(acrylamide‐co‐(3‐(N,N‐dimethyl‐N‐3′‐(N′‐acryloyl)aza‐tridecyl) ammonio butanoate))]. The response of aqueous polymer solutions to the addition of various classes of surfactant was investigated and compared to that of an analogous novel polymer containing the sulfobetaine zwitterion [Poly(acrylamide‐co‐(N,N‐dimethyl‐N‐3′‐(N′‐acryloyl) aza‐tridecyl) ammonio propane sulfonate))]. It was found that the addition of sodium dodecyl sulfate (SDS) produced a pronounced maximum in viscosity, while dodecyltrimethylammoniumbromide (DTAB), N‐dodecyl‐N,N‐dimethylammonio‐1‐propanesulfonate (SB3‐12), and Triton X‐100 either had no effect, or produced a decrease in viscosity. The effect of pH on polymer–SDS interaction was also studied. Lowering pH increased the SDS–polymer interaction and significantly shifted viscosity enhancement to a higher SDS concentration.     

Dye aggregation and influence of pre-micelles on heterogeneous catalysis: A photophysical approach

Common cationic dyes used for laser and fluorescent probes present low solubility in water. In order to increase the dye concentration in aqueous solutions, anionic surfactant can be added. The strong interaction between anionic surfactant and cationic dye can affect drastically the dye absorption and fluorescence properties. Here we observed that the fluorescence of the species in aqueous solution is maximized at condition of complete micellization of surfactants at critical micelle concentration (CMC). In addition, combined measurements of absorption, emission and fluorescence lifetime provide fundamental information on the critical concentration of H-aggregates formation and monomer separation, induced by pre-micelles and homomicelles on different surfactant sodium dodecylsulphate (SDS) concentration. The experimental results show how to find precisely the critical concentration of H-aggregates by optical method in two different xanthene-derived molecules: rhodamine 6G and rhodamine B. The adequate transference of electron from excited dye to the conduction band of semiconductor (TiO₂) promotes the creation of reactive species that provides the degradation of dye with advantage of use of irradiation in the visible region and strong photobleaching with direct exposure to the visible light irradiation in a scale of time of 10 min.     

Application of derivatized magnetic materials to the separation and the preconcentration of pollutants in water samples

Monitoring pollutants in water samples is a challenge to analysts. In recent years, separation technology based on magnetic materials has received considerable attention. This article reviews the literature dealing with the application of magnetic materials, combined with other materials (e.g., silica, octadecylsilane, polymers and surfactants), to the separation and the preconcentration of pollutants in water samples. The magnetic extraction method is not only convenient, economical and highly efficient, but it also overcomes problems with conventional solid-phase extraction, (e.g., packing of sorbent into the column and time-consuming loading of large-volume samples).     

Effects of surfactants on morphology in synthesis of α-Mn2O3 nanostructures

Cubic and chain-like structure of α-Mn₂O₃ with a high surface area was prepared by air oxidation of manganese chloride through sol process by adding hexamine and mercaptosuccinic acid as wetting agent, respectively. The as-synthesized products were characterized with X-ray powder diffraction (XRD), Energy Dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), and selected area electron diffraction (SAED). The possible formation mechanism of α-Mn₂O₃ cubic and chain-like nanostructures has been proposed and discussed.     

Triton X-100/甲苯/水三元体系界面张力的耗散颗粒动力学模拟

采用耗散颗粒动力学方法在介观层次上模拟了非离子表面活性剂Triton X-100 在油/水界面上的分布行为, 并把用于油/水二元体系界面张力的计算方法拓展到含表面活性剂的三元体系. 利用该方法可以得到与实验数值吻合的界面张力数据. 另外, 模拟结果直观展示了表面活性剂界面张力与界面密度的关系, 为表面活性剂复配增效理论提供了依据. 该模拟方法给出的微观信息可以为驱油体系配方筛选和表面活性剂有效应用提供指导.