Improved water resistance of SrAl2O4: Eu2+, Dy3+ phosphor directly achieved in a water-containing medium

In this paper, a heterogeneous precipitation method utilizing urea hydrolysis was adopted to coat a SiO₂ layer on the surface of SrAl₂O₄:Eu²⁺, Dy³⁺ long persistence phosphors. To avoid phosphor hydrolysis in a water-containing coating medium, the hydrolysis and polymerization reactions of tetraethyl orthosilicate (TEOS) were concerned and carried out. The crystal phases, surface morphologies, hydrolysis stability and water resistance on afterglow properties of coated phosphors were investigated. Scanning electron microscopy, energy dispersive spectrum analysis, transmission electron microscope and Fourier transform infrared spectrum results confirmed that a continuous, uniform and compact SiO₂ coating layer was successfully obtained on the phosphors surface. A theoretical coating amount of 5% or higher was found to be good for hydrolysis stability. Photoluminescence results revealed the coated phosphors showed much better water resistance on afterglow properties than the uncoated phosphor. We also discussed and proposed the hydrolysis restriction mechanism of SrAl₂O₄:Eu²⁺, Dy³⁺ in the water-containing coating medium.     

Tuning the properties of a black TiO2-Ag visible light photocatalyst produced by a rapid one-pot chemical reduction

A highly efficient black TiO₂-Ag photocatalytic nanocomposite, active under both UV and visible light illumination, was synthesized by decorating the surface of 25 nm TiO₂ particles with Ag nanoparticles. The material was obtained via a rapid, one-pot, simple (surfactant and complexing agent free) chemical reduction method using silver nitrate and formaldehyde as a metal salt and reducing agent, respectively. The nanocomposite shows an increase of over 800% in the rate of photocatalytic methylene blue dye degradation, compared to commercial unmodified TiO_2, under UV-VIS illumination. Unlike pure TiO₂, the nanocomposite exhibits visible light activation, with a corresponding drop in optical reflectance from 100% to less than 10%. The photocatalytic properties were shown to be strongly enhanced by post-reduction annealing heat treatments in air, which were observed to decrease, rather than coarsen, silver particle size, and increase particle distribution. This, accompanied by a variation in the silver surface oxidation states, appear to dramatically affect the photocatalytic efficiency under both UV and visible light. This highly active photocatalyst could have wide ranging applications in water and air pollution remediation and solar fuel production.     

自由来流湍流与三维壁面局部粗糙诱导平板边界层不稳定T-S波的数值研究

采用直接数值模拟（DNS）方法,研究了在自由来流湍流与三维壁面局部粗糙作用下平板边界层内诱导产生不稳定T-S波的物理问题.数值结果可知,在平板边界层内发现了二维和三维T-S波组成的波包空间序列以及求得了波包向前传播的群速度大小,从而证明了自由来流湍流与三维壁面局部粗糙作用是激励平板边界层内诱导产生不稳定T-S波的一种机制.随后,建立了平板边界层内被激发的二维和三维T S波的初始幅值与自由来流湍流度,三维壁面局部粗糙的流向长度、展向宽度及法向高度之间的关系.这一问题的深入研究,进一步完善了流动稳定性与湍流理论.     

DIFFERENCE BETWEEN ARTIFICIAL AND COMMERCIAL PIPES IN TRANSITION ZONE1)

管路沿程损失是教学中要讲的内容。其中在过渡粗糙区,人工管和商业管的沿程损失系数存在差异。本文对此差异做了初步分析。从学生对此差异的理解和表面粗糙度的含义两方面探讨了表面粗糙度对此差异的影响。量化探讨表面粗糙度在过渡粗糙区的作用仍是个问题。     

MEASUREMENT OF ADHESION FORCES IN AIR WITH THE VIBRATION METHOD

The vibration method represents a practical method for the measurement of adhesion forces and adhesion force distributions. This method causes sinusoidally altemating stresses and yields detachment and contact forces between particles and substrate of the same order of magnitude. Alternating contact forces of the vibration method can cause an adhesion force intensification through flattening of asperities. The measuring principle of the vibration method and the analysis of experimental results are described in the article. Normal adhesion forces (pull-off forces) are measured using the vibration method and the colloidal probe technique. The results of both methods show good agreement for small particle sizes. The influence of the detachment force direction is shown by comparing tangential and normal adhesion forces measured using particle reentrainment in a turbulent air flow and the vibration method, respectively. The surface roughness of the substrate and the relative humidity are shown to significantly influence the measured adhesion forces. For the calculation of the adhesion forces, an approach by Rabinovich was combined with approximations of plastic micro asperity flattening. The Rabinovich approach accounts for roughness effects on the van der Waals force by incorporating the rms roughness of the interacting surfaces. rms-values of the particles and substrates were measured with atomic force microscopy at different scanning areas.     

Wave-like deformations for oscillating carbon nanotubes

Carbon nanostructures such as nanotubes and fullerenes, represent future materials because of their remarkable mechanical, electrical and thermal properties. Double-walled carbon nanotubes are widely studied as possible gigahertz oscillators, where the inner tube oscillates within the outer tube. These oscillators are believed to generate frequencies in the gigahertz range and typically of the order of 1–74 GHz. They are also known to generate wave-like formations on the outer surface. In this paper, we study such induced deformations on the surface of the outer tube, as generated by the moving inner tube. Following previous authors we assume that double-walled carbon nanotubes can be modelled as transversely isotropic linearly elastic materials. Using a previously derived approximate force distribution for the resultant van der Waals forces arising from the interatomic interactions, we solve a dynamic linearly elastic problem, and show that the resulting solution exhibits wave-like behaviour.     

Onset of Surface Damage in Modular Orthopedic Implants: Influence of Normal Contact Loading and Stress-assisted Dissolution

Surface damage at interfaces of modular implants results from repeated fretting contacts between metallic surfaces in a corrosive environment. As a first step in understanding this complex process, multi-asperity contact experiments were conducted to characterize roughness evolution due to action of contact loads and exposure to a reactive environment. Cobalt–chromium specimens with surface roughness similar to modular implant were first subjected to only contact loading and subsequently, to alternating contact loads and exposure to reactive environment. During repeated normal contact loading, amplitude of surface roughness reached a steady value after decreasing during the first few cycles. However during the second phase surface roughness amplitude continuously evolved—decreasing during contact loading and increasing on exposure to corrosive environment. The increase in roughness amplitude during surface reaction depended on the magnitude of applied contact loads. A damage mechanism that incorporates contact-induced residual stress development and stress-assisted dissolution is proposed to elucidate the measured surface roughness evolution.     

Transient Waves on the Free Surface of a Viscoelastic Anisotropic Half-Space

The Stroh formalism is employed to discuss the existence of transient surface waves on a viscoelastic anisotropic hall-space. The compatibility conditions, obtained using the integral formulation of Lothe and Barnett [13, 14], are examined on the basis of an asymptotic expansion of the viscoelastic kernel and a separation of space variables. Some previous results on elastic media are extended to viscoelasticity, exploiting the consequences of the second law of thermodynamics. It is found that all the allowed transient surface modes take the form of inhomogeneous plane waves whose amplitude exponentially decays along the propagation direction on the surface. Special solutions are derived explicitly for one-component surface waves where transient modes are admitted also in those cases in which stationary waves cannot occur. Mathematics Subject Classifications (2000) 74D05, 74J15.     

Analysis of dislocation nucleation from a crystal surface based on the Peierls-Nabarro dislocation model

Dislocation nucleation from a stressed crystal surface is analyzed based on the Peierls-Nabarro dislocation model. The variational boundary integral approach is used to obtain the profiles of the embryonic dislocations in various three-dimensional nucleation configurations. The stress-dependent activation energies required to activate dislocations from their stable to unstable saddle point configurations are determined. Compared to previous analyses of this type of problem based on continuum elastic dislocation theory, the present analysis eliminates the uncertain core cutoff parameter by allowing for the existence of an extended dislocation core as the embryonic dislocation evolves. Moreover, atomic information can be incorporated to reveal the dependence of the nucleation process on the profile of the atomic interlayer potential as compared to continuum elastic dislocation theory in which only elastic constants and Burgers vector are relevant. Finally, the presented methodology can also be readily used to study dislocation nucleation from the surface heterogeneities such as cracks, steps, and quantum structures of electronic devices.