等离子体辐照的聚乙烯表面接枝交联共聚合

聚合物利用低温等离子体预辐照进行表面接枝共聚合已有报道.此方法的优点是接枝层被限制在聚合物表面,辐照过程对基材本体性质无影响,且整个过程对环境无污染. 用等离子体使聚合物表面产生自由基,不需要表面具有不饱和键或特殊官能团,因而适用于任何聚合物,甚至于一些无机物如玻璃等.利用等离子辐照后暴露于空气的聚合物表面上生成的过氧自由基或过氧化物进行接枝反应,一般接枝量不大.本工作中,我们自己设计了反应器,以超高分子量聚乙烯(UHMWPE)为基材,以甲基丙烯酸甲酯(MMA)为接枝单体,在无氧条件下利用等离子体辐照产生的表面自由基进行了接枝聚合,产物接枝量高达10％.还用顺磁共振技术对表面自由基性质及其在接枝过程中的行为进行了跟踪研究.     

Modification of polysulfone membranes 4. Ammonia plasma treatment

The effect of NH₃ and NH₃/Ar plasma on ultrafiltration polysulfone membranes have been studied. Results of contact angle, FTIR-ATR and X-ray photoelectron spectroscopy experiments clearly showed that both plasmas introduced hydrophilic, nitrogen- and oxygen-containing moieties on the polymer surface and that NH₃/Ar plasma was more efficient. That plasma was also more aggressive--signs of strong etching could be seen on the SEM pictures. Redeposition of etched material seemed to take place inside the pores. On the contrary, ammonia plasma was soft and caused cleaning the surface and pores enlargement. Performance of ammonia plasma modified membranes was greatly improved and independent on solution pH. The last observation proved amphoteric character of the surface. NH₃/Ar plasma treatment gave membranes of acidic surface and filtration indices not so good as for ammonia plasma.     

Resistance to Surfactant and Protein Fouling Effects at Conducting Diamond Electrodes

Boron‐doped diamond thin‐film electrodes display negligible fouling effects in the presence of high levels of surface‐active materials, including proteins. Dramatic improvements in the stability of the analyte response (compared to common glassy carbon and carbon paste electrodes) are illustrated using bovine serum albumin (BSA), gelatin, and Triton X‐100 in connection with repetitive square‐wave voltammetric (SWV) measurements. The voltammetric response of ascorbic acid at the diamond electrode exhibits negligible shifts in peak potentials and minimal depressions of current signals over a wide range of surfactant concentrations (0–750 ppm). For example, the diamond electrode exhibited 70, 50 and 60 mV potential shifts for 10 repetitive voltammetric scans in the presence of 100 ppm BSA, gelatin and Triton X‐100, respectively, compared to 120, 190, and 280 mV shifts observed at the glassy carbon electrode. Furthermore, only 4.3 and 6.2% of the initial current decays were observed in the presence of 100 ppm Triton X‐100 and gelatin, respectively (compared to 45.2 and 34.4% diminutions at the glassy carbon electrode). Such improved performance was also confirmed from the SWV measurements of uric acid, dihydroxyphenylacetic acid, and catechol. The greatly improved resistance to surfactant interference reflects the fact that the as‐grown diamond thin film, composed of oxide‐free and hydrogen‐terminated surface, has a relatively lower surface energy and minimal electrostatic attributes, either specific or general, so that little adsorption of surface‐active agents occurs. The topographic AFM images of the diamond electrode surface confirm a negligible BSA fouling effect after repetitive SWV measurements. Such enhanced antifouling features make diamond electrodes very attractive for numerous real‐life electroanalytical applications.     

CHARACTERIZATION OF AMPHIPHILIC AND MICROPHASE SEPARATED GRAFT COPOLYMERS Ⅱ SURFACE CHARACTERIZATION AND IN VITRO BLOOD-COMPATIBILITY ASSESSMENT OF POLYSTYRENE-GRAFT-ω-STEARYLPOLY (ETHYLENE OXIDE)*

This paper reported the research results concerning the surface characterization ofpolystyrene-graft-w-stearyl poly(ethylene oxide) (PS-g-SPEO) by means of XPS,contactangle measurement and TEM, and its in vitro blood compatibility assessment by measuringthe plasma recalcification time (RT) and partial thromboplastin time (PTT). The XPSresults demonstrated that the surface and bulk composition of the PS-g-SPEO graftcopolymers differ remarkably from each other,and that SPEO component was constantlyenriched at the copolymer/air interface. Contact angle studies indicated that the surfacewater wettability can be adjusted effectively by changing the composition of the copolymer.PS-g-SPEO graft copolymers can undergo microphase separation as clearly illustrated byTEM photographs. The relationship between the surface properties of PS-g-SPEO graftcopolymer and its blood compatibility was also discussed.     

三氧化铬超微粒的制备与表征

我们曾首次报道了Fe_2O_3超微粒溶胶具有大的三阶光学非线性响应,其X~((3))值与商品用的掺杂CdS_(1-x)Se玻璃相近,并对其产生机制进行了初步研究.本文用微乳液法制备了经十二烷基苯磺酸钠(DBS)和硬脂酸(ST)表面修饰的Cr_2O_3超微粒,并用TEM、IR、XPS及紫外可见吸收光谱进行了表征.     

PHOTOEMISSION WITHIN AND BEYOND THE ONE-STEP MODEL

Photoemission in the vacuum ultraviolet photon regime has proved to be an effective tool for the investigation of valence band surface electronic structure. The interpretation cannot be exclusively confined to the valence bands but has to consider cross sections with realistic final states consistently designed within the one-step model. Therefore especially in the surface sensitive photoemission, several effects hide the final goal of deducing the energetic and wavefunction structure together with microscopic potential parameters through a convincing agreement of calculated with measured spectra. The final states band structure is much less well understood than the valence band structure under consideration. The optical potential, which controls the surface sensitivity through the underlying damping mechanisms, widely relies on empirical assumptions. Furthermore, the photon field is not only strongly influenced but in the vicinity of the plasma frequency also deteriorated by the electronic response. In view of high resolution spectroscopy the accuracy of the data interpretation is affected, and in fact, band-mapping methods are no longer valid. Examples of recent calculations to account for these effects are reviewed.     

锰—铈复合氧化物催化剂表面氧的性质

氧化锰催化剂广泛用于一氧化碳常温氧化及汽车尾气的净化等,CeO_2是氧化物催化剂的优良助剂。非贵金属催化剂中添加CeO_2能提高催化剂的氧化活性已有很多报道,但有关Ce对氧化锰结构及表面氧脱附性能影响的研究尚不多见。本文运用XRD、DTA和TPD-MS等手段对共沉淀法制得的Mn-Ce复合氧化物进行了物相结构和脱氧活性研究。     

金属离子对中位─四（4─N甲氧羰甲基吡啶）卟啉表面增强拉曼光谱的影响

研究了金属离子对吸附在银胶表面的中位－四（４－Ｎ甲氧羰甲基吡啶）卟啉表面增强拉曼光谱的影响。结果表明，中位－四（４－Ｎ甲氧羰甲基吡啶）卟啉可发生金属离子取代反应。金属离子嵌入卟啉大环，吸附在银胶表面的中位－四（４－Ｎ甲氧羰甲基吡啶）卟啉转变为金属配合物。给出了各种金属配合物主要拉曼峰的经验式归属。金属离子的半径，ｄ电子对卟啉环的排斥作用，金属卟啉骨架模式频率随孔穴大小，大环的平面性和π－π相互作用而相应变化的特性，都可用来解释不同金属离子配合物的结构灵敏特征峰为何存在着差异。     

Surface recombination in breakdown time delay experiments: Effect of different cathode materials

The late afterglow in nitrogen with iron electrode is studied by the breakdown time delay method, i.e., by measuring the breakdown time delay t_d as a function of the afterglow time . It is proposed that the cause of the secondary electrons initiating the breakdown is the energy of the surface recombination of nitrogen atoms on the iron electrode. The gas-phase and macrokinetic diffusive models are used to describe the experimental breakdown time delay data. By fitting the theoretical curve to the experimental data: (1) it has been confirmed that the recombination on the molybdenum glass is of the second order and the value of the surface recombination coefficient is determined at 4 mbar; (2) it has been shown that the surface recombination on the iron electrode is of the second order, and the effective recombination coefficients are determined; (3) the analytical form of the recombination coefficient as a function of the adsorption characteristics of surfaces and the pressure of the parent gas has been derived. In addition, the orders of surface recombination on the molybdenum-, aluminum-, and gold-plated electrode were determined by the same method.