高介电常数TiO2纳米晶的表面态研究

将钛酸四丁酯和硬脂酸在熔融状态下混合均匀后置于冷水浴中,使其凝固成凝胶,通过控制烧结过程中氧气的含量,成功地制备出粒度均匀、介电性能好的纳米晶TiO2.通过采用X射线光电子能谱和表面光电压谱对纳米晶TiO2表面状态的分析发现,材料表面存在大量的氧空位缺陷,暴露在粒子表面上的主要是一些金属Ti4+.纳米材料的这种表面状态对其极化性质具有重要的影响,使其在接近静态条件下的低频介电常数远大于常规材料的介电常数.     

接触角法研究医用聚醚聚氨酯材料表面自由能与界面自由能

<正> 表面性质在医用材料与生物体的相互作用中起着至关重要的作用,如血液相容性材料的表面对血细胞具有吸附、变形、凝血、溶血等作用。表面能和界面能是医用材料的重要研究内容之一,材料的表面能及其极性与非极性分量在影响或控制材料与生物体的相互作用之面一直是医用材料的重要课题。Raier曾提出当材料的临界表面张力在20-30erg/cm~2时,血液相容性好,也有人认为,血液与材料的界面自由能趋于零时,才能     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

贮氢合金材料电化学与表面性能的研究进展

贮氢合金材料电化学与表面性能的研究进展①杨勇李骏林祖赓（厦门大学化学系，固体表面物理化学国家重点实验室，厦门３６１００５）八十年代后期以来，人们对地球的环境保护提出了更高的要求，而便携式电器（如移动电话，摄像机与笔记本电脑等）对电池的需求也大量增加...     

RuO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed oxide composite coating for improvement of Al-alloy sacrificial anodes

It has been recently proved that RuO₂ can act as an effective surface activator of aluminum alloy sacrificial anodes. TiO₂ has the property of stabilizing RuO₂ coating and resisting biofouling on metal surfaces. Hence, a mixed oxide catalytic coating of TiO₂ and RuO₂ can enhance the galvanic performance of aluminum alloy sacrificial anodes and resists biofouling on the anode surface. In the present work RuO₂–TiO₂ mixed oxide was coated on aluminum alloy sacrificial anodes. The large and uniform porous nature of the coating was found to facilitate efficient ion diffusion. The coating was found to persist on the anode even after 3 months of galvanic exposure. The anode having an optimum combination of the mixed oxide had 70% TiO₂ as the major component in the coating. The catalytic coating significantly improved the performance of the anodes to a large extent.     

雷尼镍催化剂的吸附量热研究

雷尼镍催化剂的吸附量热研究王益沈俭一（南京大学化学系，南京２１００９３）ＨａｎｓＷａｒｌｉｍｏｎｔ（ＩｎｓｔｉｔｕｔｅｆｏｒＳｏｌｉｄＳｔａｔｅａｎｄＭａｔｅｒｉａｌｓＲｅｓｅａｒｃｈ，ＤｒｅｓｄｅｎＤ０１０６９，Ｇｅｒｍａｎｙ）关键词雷尼镍...     

On the physical adsorption of gases on carbon materials from molecular simulation

In this paper we present a series of work covering a range of aspects relating molecular simulation to experiment. The importance of surface mediation type effects to the adsorption of simple and complex gases is demonstrated. Coupled with the adsorption of simple gases is their projection area when used for surface area determination. The pressure dependence of a projection area is demonstrated for argon at 77 and 87.3 K. A simple model is used to account for the degree of graphitisation of a surface is demonstrated and used to account for the isosteric heat behaviour of non-graphitised carbon blacks. Turning from surfaces to porous solids, an alternative treatment of experiment data (either sub or super critical) is presented that avoids the ambiguity of excess amounts adsorbed. Using this method one is able to obtain pore size distributions and amounts adsorbed without relying on such things as helium expansion volumes. Since this type of method is usually applied to composite solids we also demonstrate the correct method for calculating the heat of adsorption using independent sets of simulations. The final topic covered in this paper is an example of the information that can be gained from the heat capacity of an adsorbed phase.     

Influence of surface treatments in the initial stages of anodizing Al–Ag alloys in neutral electrolytes

Using voltage-time responses and cyclic voltammetry, the initial stages of anodizing of Al–2.1 at.% Ag and Al–4 at.% Ag alloys are shown to depend upon the heat treatment of the alloys and the pre-treatment of the alloy surfaces. Chemical polishing of solution-treated alloys leads to relatively uniform anodic oxidation on a relatively smooth alloy surface, in the absence of significant effects of coarse, silver-rich intermetallics. In contrast, losses of current to oxygen generation arise for the roughened alloy surface from mechanical polishing. With ageing, secondary reactions at the relatively silver-rich intermetallics are more prevalent, although the effects on the voltage-time response depend upon the balance between processes occurring on the matrix and intermetallic regions, including film growth, oxygen generation within the anodic film, film damage due to release of oxygen, dissolution of silver species and re-growth of damaged film.     

异烟酸在银溶胶上的表面增强喇曼散射及影响因素

本文研究了异烟酸吸附在银溶胶表面的表面增强喇曼散射(SERS)光谱以及卤素离子、溶液pH值及溶液浓度对异烟酸SERS光谱的影响。文章提出了离子在银溶胶表面的吸附方式,即主要以—COO~-端吸附于银溶胶表面。最后,对所述实验现象作了定性讨论。