ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

A Home-made Simple Set-up for Measurement of Electrochemical Surface Tension Spectrum on a Mercury Drop Electrode

A setup for recording surface tension curves at a mercury drop during potential scanning is designed based on photo-sensitive detection system. Surface tension spectrum at Hg drop can be recorded by voltammetric study. A Yb(III)-NO2- catalytic reduction system was used for characterization. The simple, sensitive technique can be expected to provide fresh information on molecular interactions at electrode surfaces.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

煅烧温度对TiO2/SiO2混合氧化物表面酸量的影响

采用共沉淀法制备了高钛含量的复合氧化物TiO2／SiO2．用BET、XRD、FT-IR和正胺吸附等分析手段，研究了煅烧温度对TiO2／SiO2表面酸量的影响．研究发现，随着煅烧温度的升高，TiO2／SiO2表面羟基密度、比表面积逐渐减少，TiO2晶粒尺寸变大，造成TiO2／SiO2表面酸量降低．当煅烧温度达到600℃到800℃之间，表面酸量基本不再改变．     

Highly sensitive determination of haloperidol in human serum by capillary gas chromatography using a surface ionization detector

A method has been developed for highly sensitive determination of haloperidol in human serum involving a simple extraction procedure followed by gas chromatographic separation. Target components were separated from the extracting solvents with a Van den Berg type solventless sample injector before introduction Into a DB-1 capillary separation column. A surface ionization detector (SID), which has highly selective sensitivity for Substituted amines, was employed for quantitation using bromperidol as an internal standard. Chloroform proved to be the best extracting solvent, yielding a quantitative detection limit of 5 ng/ml (S/N = 2). Comparison of the response to target compounds obtained by the SID, FTD (flame thermionic detector), and FID (flame ionization detector) showed the SID to be superior.     

Monodisperse chloromethyl-functionalized macroporous polymer particles by seeded polymerization in aqueous media

This study presents a method to produce monodisperse chloromethyl-functionalized macroporous poly(styrene-co-divinylbenzene) polymer particles by seeded polymerization in aqueous media. We observed that the molecular structure of polystyrene seed particles, the composition of the secondary monomer mixtures, and the type of solvents were very important factors that determine the morphology and porosity of the final particles. This study proposes that the molecular chemistry of polystyrene seed polymers, increasing molecular weight or crosslinking, is another factor that can control the porosity of the final particles. Also, the selection of a poor solvent was effective in forming the larger surface area. In this study, it was confirmed that the chloromethyl groups introduced on the surface of porous particles were quantified chemically and their effective incorporation had a close relationship with the surface area.     

Synthesis, characterization and potential biomedical applications of N-succinimidyl ester functionalized, polypyrrole-coated polystyrene latex particles

N-Succinimidyl ester functionalized polypyrrole-coated polystyrene latex particles (PS_E-PPyNSE) were prepared by the in situ copolymerization of pyrrole and the active ester-functionalized pyrrole (pyrrole-NSE) in the presence of polystyrene latex particles. Polystyrene microspheres were prepared by emulsion polymerization (PS_E) leading to particles having a diameter of 450 nm. These PS_E particles were precoated with poly(N-vinylpyrrolidone) prior to the in situ copolymerization of pyrrole and pyrrole-NSE. The initial comonomer concentration fractions were 25/75, 50/50 and 75/25 for pyrrole and pyrrole-NSE, respectively. The PPy-coated PS_E particles were characterized in terms of morphology, particle size, electrophoretic mobility and chemical composition. The study of morphology by means of scanning electron microscopy showed roughening of the underlying PS_E particles owing to the addition of PPyNSE, the overlayer thickness of which was estimated to be around 7 nm. Moreover, loading PPyNSE overlayers resulted in a shift of the electrophoretic mobility from –5.31 m cm/V s to a very small but positive value (0.082–0.112 m cm/V s). X-ray photoelectron spectroscopy and IR spectroscopy permitted the detection of pyrrole-NSE repeat units at the surface indicating that pyrrole and pyrrole-NSE did indeed copolymerize. The PS_E-PPyNSE particles were further evaluated as bioadsorbents of human serum albumin used as a test protein. For this study, PS_E-PPyNSE₅₀ particles, synthesized from a comonomer feed ratio of 50/50 in pyrrole/pyrrole-NSE, were used and were shown to attach efficiently human serum albumin macromolecules with a maximum amount of 0.2 mg m^–2.

The adsorption of endothelin 1 to phospholipids is governed by electrostatic interactions: A monolayer and fluorescence study

In order to elucidate the influence on the lipidic environment on the recognition process of its membrane associated receptor, the interactions of the vasoconstrictor peptide endothelin 1 with various phospholipids have been investigated using different lipidic model membranes: monolayers at constant surface pressure, vesicles and micelles. A monolayer study of ET1 adsorbed onto the water surface has shown that the C-terminus of the peptide points towards the aqueous phase. Penetration measurements into lipidic monolayers indicate that ET1 adsorbs to phospholipids with an orientation similar to that of the air–water interface and fluorescence measurements are in agreement with such an orientation of the peptide. This adsorption is selective for neutral phospholipids and indicates that the nature of the phospholipid headgroups is of major importance for the approach of the membrane associated receptor.     

Interactions between gelatin and sodium dodecyl sulphate: binding isotherm and solution properties

The interaction between sodium dodecyl sulphate (SDS) and gelatin was studied at pH 4.5 and 6.5 where the gelatin is positively charged (i.e.p. 8). At pH 4.5 a SDS/gelatin concentration range was found where gelatin precipitates. At pH 6.5 the SDS-gelatin complex remains soluble although three SDS concentration domains were distinguished where the SDS-gelatin complex had very different affinities for the solvent. Below C₁ the complex was highly surface active but other measurements (viscosity, potentiometry, protons uptake) did not reveal any particular consequence of binding. Between C₁ and C₂ the molecular size decreased (viscosity lowering) upon charge neutralization and collapse about small SDS aggregates (17 SDS molecules per gelatin molecule). Above C₂ a cooperative binding mechanism lead to the formation of SDS aggregates; the complex stretched out and turned strongly hydrophilic (the viscosity increases, low surface activity). At saturation one gelatin molecule bound about 200 SDS molecules. Above the overlap concentration (about 3 wt%) SDS aggregates formed between several gelatin molecules, the viscosity increased continuously with SDS concentration and the binding ratio was lower than in dilute gelatin solutions. A very good correspondence was found between the different analytical data including turbidity, viscosity, surface tension, protons uptake and direct potentiometric SDS binding measurements.     

红外光谱研究甲烷和氧与SrO-La2O3/CaO表面的相互作用

在甲烷氧化偶联（ＯＣＭ）反应条件下，用原位红外光谱研究ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，结果表明，晶格氧使甲深度氧化，Ｌａ２Ｏ３和ＣａＯ具有活泼的晶格氧，ＳｒＯ的晶格氧比较稳定，气相氧通过催化剂表面消耗掉的晶格氧，加速甲烷了深度氧化，另一方面，催化剂表面的碳酸根物种在氧气氛下分解，在Ｌａ２Ｏ３和ＬＣ催化剂中，催化剂表面Ｌａ２Ｏ２（ＣＯ３）的分解形成配位不饱和的晶格氧Ｏ＾２－，并为气相氧吸附提供氧空