Origin of the surface recombination centers in ZnO nanorods arrays by X-ray photoelectron spectroscopy

The surface composition of as-grown and annealed ZnO nanorods arrays (ZNAs) grown by a two-step chemical bath deposition method has been investigated by X-ray photoelectron spectroscopy (XPS). XPS confirms the presence of OH bonds and specific chemisorbed oxygen on the surface of ZNAs, as well as H bonds on surfaces which has been first time observed in the XPS spectra. The experimental results indicated that the OH and H bonds play the dominant role in facilitating surface recombination but specific chemisorbed oxygen also likely affect the surface recombination. Annealing can largely remove the OH and H bonds and transform the composition of the other chemisorbed oxygen at the surface to more closely resemble that of high temperature grown ZNAs, all of which suppresses surface recombination according to time-resolved photoluminescence measurements.     

Microstructure and high-temperature corrosion behaviors of aluminide coatings by low-temperature pack aluminizing process

Aluminide coatings were produced on carbon steel and Fe-5Cr-Mo alloy at a relatively lower temperature below 600 °C in shorter treatment time by a combination of surface refinement process and pack aluminizing process. Repetitive ball impact, generated by mechanical vibration, caused the top-layer refinement of substrates in a conventional pack aluminizing process. The effects of temperature and treatment time on the formation of aluminide coatings were analyzed. The microstructure of the coatings was investigated by SEM, AFM and XRD. The aluminide coatings were one-layer, compacted structure with ultrafine grains and uniform elemental distribution. High-temperature oxidation and sulphidation tests were carried out at 600 °C in air for 200 h and 10% SO₂ + Ar gas mixture atmosphere for 50 h, respectively. The mass gains and spallation indicated that the aluminide coatings significantly improved the high-temperature oxidation and sulphidation resistance.     

Band bending at the conducting polymer/indium tin oxide interfaces with and without ultraviolet treatment

In this study, the effect of ultraviolet treatment on the band bending at the poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate)/indium tin oxide (PEDOT:PSS/ITO) interfaces were researched. The authors suggested that ultraviolet treatment could lead to a reduction in the band bending at the PEDOT:PSS/ITO interface, owing to the removal of carbon contamination at the ITO surfaces and a decrease in the number of the trap-states at the PEDOT:PSS/ITO interface.     

A fluorine-contained copolymer ultra-thin film: Stability and electrochemical corrosion behavior

A novel fluorine-contained random copolymer (2,3,4,5,6-pentafluorostyrene)-r-poly(4-vinyl benzocyclobutene) (P(PFSt-r-4-VBCB)) was synthesized, and then spin-coated onto Si substrates followed by thermal cross-linking to produce the copolymer ultra-thin films. Although the surface modification with the P(PFSt-r-4-VBCB) film was simple and did not rely on special surface chemical reactions, the film could decrease the surface energy significantly, more importantly; the film demonstrated excellent stability and corrosion resistance. This random copolymer film could find broad applications in modifying various solid surfaces to enhance the properties such as corrosion resistance and solvent resistance.     

Comparative study of electrochemical capacitance of multi-walled carbon nanotubes before and after chopping

In the work, short multi-walled carbon nanotubes (S-CNTs) were synthesized by chopping conventional μm-long multi-walled carbon nanotubes (L-CNTs) under ultrasonication in H₂SO₄/HNO₃ mixed acids. A comparative electrochemical investigation performed in 6 M KOH solution demonstrated that a specific capacitance (SC) of ca. 14.6 μF cm⁻² was delivered by the S-CNTs with the specific surface area (SSA) of 207 m² g⁻¹, much larger than that of ca. 10.1 μF cm⁻² for the L-CNTs with the SSA of 223 m² g⁻¹, the reason for which was that S-CNTs with two open ends, due to good ion penetrability, provided more entrances for electrolyte ions to access the inner surface easily through their shorter inner pathway so as to enhance their SSA utilization and geometric SC. The surface structure disruption of S-CNTs, owing to ultrasonication and oxidation during chopping process, deteriorated their electronic conductivity and resulted in an inferior power property in contrast to L-CNTs.     

An investigation of structural phase transformation and electrical resistivity in Ta films

In this work, we report the effect of substrate, film thickness and sputter pressure on the phase transformation and electrical resistivity in tantalum (Ta) films. The films were grown on Si(1 0 0) substrates with native oxides in place and glass substrates by varying the film thickness (t) and pressure of the working gas (p_Ar). X-ray diffraction (XRD) analysis showed that the formation of α and β phases in Ta films strongly depend on the choice of substrate, film thickness t and sputter pressure p_Ar. A stable α-phase was observed on Si(1 0 0) substrates for t ≤ 200 nm. Both α and β phases were found to grow on glass substrates at all thicknesses except t = 100 nm. All the films grown on Si(1 0 0) substrates for p_Ar ≤ 6.5 mTorr had α-phase with strong (1 1 0) texture normal to the film plane. The glass substrates promoted the formation of β-phase in all p_Ar except p_Ar = 5.5 mTorr. The resistivity ρ was observed to decrease with t, whereas ρ was increased with p_Ar on Si(1 0 0) substrates. In all films, the measured resistivity ρ was greater than the bulk resistivity. The resistivity ρ was influenced by the effects of surface roughness and grain size.     

Stability and electronic properties of the O-terminated Cu2O(111) surfaces: First-principles investigation

The effect of different vacancies on the morphology of the O-terminated Cu₂O(111) surface has been studied through the first-principles calculations. Our results show that Cu and O vacancies trigger large relaxations and formation of two different facets. Our emulated STM images are in consistent with the experimental STM patterns. A sizeable magnetic moment (∼1.0 μ_B) was found for surfaces with either Cu or O vacancies. The calculated formation energies of surface vacancies indicate that the deficient surfaces are more stable than the stoichiometric O-terminated (1×1) surface, which is also in line with our results obtained from ab initio atomistic thermodynamics studies.     

Surface modification of pitch-based spherical activated carbon by CVD of NH3 to improve its adsorption to uric acid

Surface chemistry of pitch-based spherical activated carbon (PSAC) was modified by chemical vapor deposition of NH₃ (NH₃-CVD) to improve the adsorption properties of uric acid. The texture and surface chemistry of PSAC were studied by N₂ adsorption, pH_PZC (point of zero charge), acid-base titration and X-ray photoelectron spectroscopy (XPS). NH₃-CVD has a limited effect on carbon textural characteristics but it significantly changed the surface chemical properties, resulting in positive effects on uric acid adsorption. After modification by NH₃-CVD, large numbers of nitrogen-containing groups (especially valley-N and center-N) are introduced on the surface of PSAC, which is responsible for the increase of pH_PZC, surface basicity and uric acid adsorption capacity. Pseudo-second-order kinetic model can be used to describe the dynamic adsorption of uric acid on PSAC, and the thermodynamic parameters show that the adsorption of uric acid on PSAC is spontaneous, endothermic and irreversible process in nature.     

Investigation of host-to-activator energy transfer and surface losses in SrY2O4:Eu under VUV excitation

We have completed a study of the optical properties of SrY₂O₄:Eu³⁺ under vacuum ultraviolet (VUV) excitation. Reflectance measurements on the undoped material yield a calculated band gap of about 6.1 eV. Studies on the doped material indicate that Eu³⁺ occupies the Y(1) and Y(2) sites in this host. Host-to-activator energy transfer calculations indicate a preference for transfer to Eu³⁺ at the Y(2) site. Modeling of the transfer efficiency data leads us to estimate that about 35% of absorbed radiation is lost to the surface under excitation near the band edge.     

Adsorption of Pb on NiAl(1 1 0): energetics and structure

The adsorption of Pb onto a NiAl(1 1 0) single crystal surface at 300 K has been studied by Auger electron spectroscopy (AES), Low energy electron diffraction (LEED), molecular beam/surface scattering and single crystal adsorption calorimetry (SCAC). AES indicates a Stranski-Krastanov growth mode, i.e., Pb initially grows on NiAl(1 1 0) two-dimensionally until the first layer completes at 0.89 ML, where a superstructure is observed by LEED, followed by 3D islanding. Measurements of the Pb gas that does not stick indicate that Pb sticks on NiAl(1 1 0) with an initial probability of 0.99. The initial heat of adsorption of Pb on NiAl(1 1 0) is 249 ± 10 kJ/mol. Due to the repulsive interactions between Pb adatoms, the heat of adsorption decreases within the first layer to a value identical to the heat of sublimation of bulk Pb (195 kJ/mol), where it remains at higher coverages. This first application of adsorption calorimetry on such a thick sample (75 μm versus 0.2-8 μm previously) demonstrates that adsorption calorimetry can be extended to a wider range of surfaces, since this thickness can be achieved with nearly any single crystal material by simple mechanical thinning.