Self-assembly formation of the ordered nanostructure arrays induced by Be interaction with Si(1 1 1) surface

Formation of the beryllium (Be) submonolayers on the Si(1 1 1)7 × 7 surface has been studied using scanning tunneling microscopy. It has been found that Be interaction with Si(1 1 1) at 500-700 °C results in a self-assembly formation of the four various types of the highly-ordered nanostructure arrays. The nanostructure arrays develop on top of the “soft” silicide layer, which period and orientation alter with the nanostructure growth: the shorter the nanostructure period, the larger the rotation angle. The main structural parameters of the silicide layer and nanostructure arrays have been established.     

表面润湿法合成β沸石体系中晶种作用的研究

系统研究了表面润湿法合成β沸石的体系中,干晶种、润湿态晶种、异晶晶种(Y沸石、ZSM 5沸石)以及碱处理β沸石晶种在此晶化体系中的作用.采用β沸石产品及异晶作晶种时,可使产品的相对结晶度稍有提高,但对沸石微晶核的结构导向作用不明显.经浓碱液处理20min后的β沸石产品(碱处理晶种)作晶种引入晶化体系后,可以显著提高产品的相对结晶度,降低模板剂的用量,缩短晶化诱导期,成为表面润湿法合成β沸石体系的有效晶种形式.     

Novel metrics and methodology for the characterisation of 3D imaging systems

The modelling, benchmarking and selection process for non-contact 3D imaging systems relies on the ability to characterise their performance. Characterisation methods that require optically compliant artefacts such as matt white spheres or planes, fail to reveal the performance limitations of a 3D sensor as would be encountered when measuring a real world object with problematic surface finish. This paper reports a method of evaluating the performance of 3D imaging systems on surfaces of arbitrary isotropic surface finish, position and orientation. The method involves capturing point clouds from a set of samples in a range of surface orientations and distances from the sensor. Point clouds are processed to create a single performance chart per surface finish, which shows both if a point is likely to be recovered, and the expected point noise as a function of surface orientation and distance from the sensor. In this paper, the method is demonstrated by utilising a low cost pan-tilt table and an active stereo 3D camera. Its performance is characterised by the fraction and quality of recovered data points on aluminium isotropic surfaces ranging in roughness average (Ra) from 0.09 to 0.46 µm at angles of up to 55° relative to the sensor over a distances from 400 to 800 mm to the scanner. Results from a matt white surface similar to those used in previous characterisation methods contrast drastically with results from even the dullest aluminium sample tested, demonstrating the need to characterise sensors by their limitations, not just best case performance.     

Polarization‐controlled surface plasmon holography

The ability of generating arbitrary surface plasmon (SP) profiles in a controllable manner is of particular interest in designing plasmonic imaging, lithography and forcing devices. During the past decades, holography has gained enormous interest and achievements in free‐space three‐dimensional displays. Here, by applying a two‐dimensional version of holography, we experimentally demonstrate a generic method to control the SP profiles. Through controlling the orientation angles of two separated slits under circular polarization incidence, the amplitude and phase of the excited SPs can be freely manipulated, which allows direct generation of the desired SP profiles. A series of controllable SP holography schemes are theoretically and experimentally demonstrated, where the holographic SP profiles with high imaging quality can be dynamically modulated by varying the circular polarization handedness or orientation angle of linear polarization. The universality and simplicity of the proposed design strategies would offer promising opportunities for practical plasmonic applications.

     

纳米晶硅的掺杂及表面改性研究(英文)

采用基于密度泛函理论的第一性原理方法(DMOL3程序),在广义梯度近似(GGA)下,计算了硅纳米晶(Si75H76)在B和P掺杂和乙基(—CH2CH3)、异丙基(—CH(CH3)2)表面改性等情形下态密度、结合能及能隙的变化。结果表明:掺杂对体系的禁带宽度(约3.12eV)几乎没有影响,但会引入带隙态;三配位的B掺杂,在禁带中靠近导带约0.8eV位置引入带隙态,三配位的P掺杂在禁带中靠近价带0.2eV位置引入带隙态;四配位的B掺杂,在禁带中靠近价带约0.4eV位置引入带隙态,四配位的P掺杂在禁带中靠近导带约1.1eV位置引入带隙态;且同等掺杂四配位时体系能量要低于三配位;适当的乙基或异丙基表面覆盖可以降低体系的总能量,且表面覆盖程度越高体系能量越低,但在表面嫁接有机基团过多将导致过高位阻,计算时系统不能收敛。     

Unoccupied band dispersion of Si(1 1 1):√3 × √3-Ag surface studied by time- and angle-resolved two-photon photoemission spectroscopy

Band dispersion and transient population of unoccupied electronic states on Si(1 1 1):√3 × √3-Ag surface have been studied by time-resolved (TR) and angle-resolved (AR) two-photon photoemission (2PPE) spectroscopy. The band dispersions originating from unoccupied electronic states have been identified from the comparison between AR-2PPE spectra and angle-resolved one-photon photoemission spectra with synchrotron radiation. A lifetime of unoccupied surface state has been determined from the TR-2PPE spectra.     

Coarsening of mass-selected Au clusters on amorphous carbon at room temperature

Low-energy cluster beam deposition was used to deposit mass-selected Au_n clusters (n = 4, 6, 13 and 20) on amorphous carbon (a-C) substrates. The resulting samples were stored at room temperature under ambient conditions for time periods up to 32 months to analyze the coarsening behaviour of the clusters. Cluster-size distributions were measured in regular time intervals by transmission electron microscopy (TEM). The TEM experiments show a significant increase of the average cluster size with time analogous to classical surface Ostwald ripening (OR). The coarsening of Au clusters can be well described by steady-state diffusion-limited kinetics. The derived surface mass-transport diffusion coefficients at room temperature range between 1.1 and 3.8·10⁻²⁵ m² s⁻¹ for our samples. A detailed analysis of values suggests that, the rate of the surface OR for mass-selected Au_n clusters increases with the cluster size in the sequence: Au₄ ≈ Au₆ < Au₁₃ < Au₂₀ for the investigated range of Au clusters. Given that the initial, on-surface cluster-size distributions are nominally monodisperse, classical OR with cluster coarsening based only on the Gibbs-Thomson effect cannot explain the observed coarsening. The activation of the coarsening process is rationalized by initial variations of the cluster sizes due to the deposition process itself and/or the interaction of the clusters with the substrate. Moreover, the presence of initial deposited Au clusters as different isomers with slightly different chemical potential on the substrate, may also initiate the coarsening by surface OR. Furthermore, we find that the coarsening is most pronounced for the paucidispersed sample with Au_m (10 ? m ? 20) clusters. A possible explanation of this behaviour is the presence of an initial distribution of different cluster sizes directly after deposition.     

Core-level shifts at the Pt/W(1 1 0) monolayer bimetallic interface

We have measured W and Pt 4f_7/2 core-level photoemission spectra from interfaces formed by ultrathin Pt layers on W(1 1 0), completing our core-level measurements of W(1 1 0)-based bimetallic interfaces involving the group-10 metals Ni, Pd, and Pt. With increasing Pt coverage the sequence of W spectra can be described using three interfacial core-level peaks with binding-energy (BE) shifts (compared to the bulk) of −0.220 ± 0.015, −0.060 ± 0.015, and +0.110 ± 0.010 eV. We assign these features to 1D, 2D pseudomorphic (ps), and 2D closed-packed (cp) Pt phases, respectively. For ∼1 ps ML the Pt 4f_7/2 BE is 71.40 ± 0.02 eV, a shift of +0.46 ± 0.09 eV with respect to the BE of bulk Pt metal. The W 4f_7/2 core-level shifts induced by all three adsorbates are semiquantitatively described by the Born-Haber-cycle based partial-shift model of Nilsson et al. [39]. As with Ni/W(1 1 0), the difference in W 4f_7/2 binding energies between ps and cp Pt phases has a large structural contribution. The Pt 4f lineshape is consistent with a small density of states at the Fermi level, reflective of the Pt monolayer having noble-metal-like electronic structure.     

Vacuum ultraviolet-induced surface modification of cyclo-olefin polymer substrates for photochemical activation bonding

The surface of cyclo-olefin polymer (COP) was treated with vacuum ultraviolet (VUV) light at 172 nm wavelength to improve the wettability and adhesion properties. Through VUV treatment in air, the terminal groups of the COP surface were oxidized into oxygen functional groups, containing CO, CO, and COO components, making the COP surface hydrophilic. The extent of oxygenation was evaluated by XPS and FTIR-ATR spectra, and it was shown that the surface properties, hydrophilicity, and functionalization were dependent on both VUV irradiation distance and irradiation time, which have an effect on the concentration of oxygen functional groups. VUV-light treatment with a short irradiation distance was more effective in introducing oxygen functional groups.