Photoemission study of the modification of the electronic structure of transition-metal overlayers on TiO2 surfaces II. Cr on TiO2(0 0 1)

The electronic states of the Cr overlayers on TiO₂(0 0 1) surfaces have been investigated using angle-resolved and resonant photoemission spectroscopy with synchrotron radiation. At lower coverages, Cr deposition on TiO₂(0 0 1) creates two well separated in-gap emissions due to the formation of surface Ti³⁺ (3d¹) ions and Cr³⁺ (3d³) ions. At higher coverages, the in-gap emission is developed into the 2-peak-structure emission of Cr 3d character. The corresponding state is considered to be of metallic nature from the viewpoint of the high ability of oxygen adsorption, but has no Fermi edge, indicating a possibility of forming small Cr clusters on TiO₂(0 0 1) at this stage.     

Amine‐blocked polyisocyanates. I. Synthesis of novel N‐methylaniline‐blocked polyisocyanates and deblocking studies using hot‐stage fourier transform infrared spectroscopy

A series of substituted N‐methylaniline‐blocked polyisocyanates based on 4,4′‐methylenebis(phenyl isocyanate) and poly(tetrahydrofuran) were prepared and characterized thoroughly with FTIR, ¹H NMR, and ¹³C NMR spectroscopy methods. Compared with unsubstituted N‐methylaniline, a blocking agent with an electron‐releasing substituent at the para position took a shorter time, whereas those with an electron‐releasing substituent at the ortho position or an electron‐withdrawing substituent at the ortho and para positions took longer times for the blocking reaction. The thermal dissociation reactions of blocked polyisocyanates were carried out with an FTIR spectrophotometer attached to hot‐stage accessories under dynamic and isothermal conditions. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate the deblocking kinetics and activation parameters. The cure times of blocked polyisocyanates with hydroxyl‐terminated polybutadiene were also determined. The deblocking temperatures, the results of cure‐time studies, and the kinetic parameters revealed that the thermal dissociation of the N‐methylaniline‐blocked polyisocyanates was retarded by electron‐donating substituents and facilitated by electron‐withdrawing substituents. The action of N‐methylanilines as blocking agents for isocyanate was explained by the formation of a four‐center, intramolecularly hydrogen‐bonded ring structure during the thermal dissociation of the blocked polyisocyanates. The formation of such a hydrogen‐bonded ring structure was confirmed and supported by variable‐temperature ¹H NMR studies and entropy parameters, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1557–1570, 2007     

First-principles study of indium on silicon (1 0 0)—the structure, defects and interdiffusion

The atomic structures of indium (In) on silicon (Si) (1 0 0)-(2 × 1) surface are investigated by the local density approximation using first-principles pseudopotentials. Total energy optimizations show that the energetically favored structure is the parallel ad-dimer model. The adsorption energy of In on ideal Si(1 0 0)-(1 × 1) surface is significantly higher than that on reconstructed Si(1 0 0)-(2 × 1) surface, suggesting that In adsorption does not break the Si-Si dimer bond of the substrate. When Si surface contains single dimer vacancy defects, In chain will be interrupted, leading to disconnected In nanowires. Displacive adsorption of In on Si(1 0 0) is also considered, and the calculation suggests that interdiffusion of In into Si substrate will not be favorable under equilibrium conditions.     

Foams and surface rheological properties of β-casein, gliadin and glycinin

Interfacial rheological properties and their suitability for foam production and stability of two vegetable proteins were studied and compared to β-casein. Proteins used ranged from flexible to rigid/globular in the order of β-casein, gliadin and soy glycinin. Experiments were performed at pH 6.7. Network forming properties were characterised by the surface dilational modulus (determined with the ring trough) and the critical falling film length (L_still) at which a stagnant protein film will break. Gliadin had the highest dilational modulus, followed by glycinin and β-casein, whereas glycinin formed the strongest film against fracture in the overflowing cylinder. The rate of decrease in the surface tension was studied at the air–water (Wilhelmy plate method) and the oil–water interface (bursting membrane) and the dynamic surface tension during compression and expansion in the caterpillar. Gliadin had the lowest equilibrium interfacial tensions and β-casein the lowest dynamic surface tension during expansion. Hardly any foam could be formed at a concentration of 0.1 g/l by shaking. At a concentration of 1.4 g/l most foam was formed by β-casein, followed by gliadin and glycinin. It seems that in the first place the rate of adsorption is important for foam formation. For the vegetable proteins, adsorption was slow. This resulted in lower foamability, especially for glycinin.     

Characterization of electrodeposited nickel film surfaces using atomic force microscopy

Microstructures of nickel surfaces electrodeposited on indium tin oxides coated glasses are investigated using atomic force microscopy. The fractal dimension D and Hurst exponent H of the nickel surface images are determined from a frequency analysis method proposed by Aguilar et al. [J. Microsc. 172 (1993) 233] and from Hurst rescaled range analysis. The two methods are found to give the same value of the fractal dimension D∼2.0. The roughness exponent α and growth exponent β that characterize scaling behaviors of the surface growth in electrodeposition are calculated using the height-difference correlation function and interface width in Fourier space. The exponents of α∼1.0 and β∼0.8 show that the surface growth does not belong to the universality classes theoretically predicted by statistical growth models.     

一种新颖的测定和分析羟自由基氧化损伤RNA及其分子机理的化学发光体系

近年来，羟自由基（^.OH)对DNA氧化损伤已受到广泛关注，但是很少研究^.OH对RNA的氧化损伤。其实，RNA与DNA一样，也是核酸的两大组分之一，也有许多重要功能。所以^.OH攻击RNA也会引起重后果，会造成细胞功能衰退甚至细胞死亡等。为此，我们建立了Vit.C-CuSO4-Phen-H2O2-PNA这一产生和测定^.OH氧化损伤RNA的化学发光体系，以便加强^.OH氧化损伤RNA的研究。通过对本体系测定条件的研究，得出了本体系最佳组方是：Vit.C,CuSO4,Phen,H2O2和RNA，浓度分别为350μmol/L,55μmol/L,350μmol/L,0.2mol/L和20μg/mL,体系pH为5．5，体系终体积为1mL。随后，利用本体系检测了槲皮素，咖啡酸，黄芩甙和芦丁抗^.OH氧化损伤RNA的作用，发现这四种抗氧化剂均能有效抑制^.OH氧化损伤RNA的分子机理，结果发现，^.OH清除剂硫脲几乎抑制全部发光，推测是因硫脲清除了引发剂^.OH所致；O^-.2清除剂SOD只能抑制小部分发光；^1O2清除剂叠氮化钠和苯甲酸都能抑制绝大部分发光。这些事实提示，^.OH是RNA氧化损伤的引发剂；O^-.2只是导致RNA氧化损伤的次要因素，^1O2才是导致RNA氧化损伤的最主要因素。     

Some results from 50 years' research on surface forces

A review is presented about research on surface forces and surface interactions conducted over the past half-century, with some emphasis on the pioneering contributions of the Department of Surface Phenomena at the Institute of Physical Chemistry of the USSR Academy of Sciences.     

Interdiffusion of hydroxyl groups and of doping additions between a bearing pipe and a deposited layer in billets of fiber light guides

Using Raman spectroscopy, a quantitative analysis of the distribution of OH⁻ ions on the boundary between a bearing pipe and a glass layer deposited from chlorides in billets for quartz fiber light guides is carried out. Water penetrated into the light-reflecting shell to a depth of several tenths of a millimeter, depending on the composition of the doping layer (i.e., ultimately on the temperature of the depsoition process). A. F. Ioffe Physical-Technical Institute, Academy of Sciences of Russia, 26, Politekhnicheskaya St., St. Petersburg, 194021, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 4, pp. 548–550, July–August, 1997.     

Inhibition of the reduction of Cr(VI) at the magnetite–water interface by calcium carbonate coatings

The effect of calcium carbonate coatings on the reduction of aqueous chromate on the magnetite(1 1 1) surface has been investigated using a combination of synchrotron based X-ray photoemission spectroscopy (PES) and X-ray absorption near edge structure (XANES) spectroscopy, along with laboratory-based powder X-ray diffraction (XRD) and scanning electron microscopy (SEM). CaCO₃ coatings (dominantly calcite with minor quantities of aragonite and vaterite) of thicknesses ranging from 10 Å to 20 m were grown on magnetite(1 1 1) surfaces by exposure to supersaturated aqueous solutions followed by evaporation of the solution—a process that mimics pore-water evaporation in vadose zones leading to the formation of caliche and calcium carbonate coatings on mineral grains. Coating thicknesses were determined from attenuation of the Fe 2p photoemission signal by the carbonate coating. For coatings less than 15 Å thick, Cr 2p photoemission and Cr L_II, L_III-edge XANES spectra show that chromate is reduced by the underlying magnetite surface; however, as the minimum coating thickness increases beyond 15 Å, the magnetite surface becomes passivated and further chromate reduction ceases. Our findings suggest that carbonate coatings on natural magnetite grains can significantly reduce or eliminate their ability to reduce Cr(VI), which is a toxic and highly mobile environmental contaminant.     

AFM, SEM and GIXRD studies of thin films of red polycarbazolyldiacetylenes

In this paper we report the results of a morphological and structural investigation on film properties of a soluble polydiacetylene, the poly[1,6-bis(3,6-dihexadecyl-N-carbazolyl)-2,4-hexadiyne] (polyDCHD-HS). The red films of this polymer, prepared by standard spin-coating techniques, revealed absence of linear dichroism and birefringence in contrast with the ordered mesophases detected by powder X-ray studies. In order to interpret the optical behavior of this polymer, we performed AFM and SEM studies of polyDCHD-HS films spun on hydrophylic and hydrophobic glass substrates. We found the presence of surfaces organized in rod-like particles, more regularly oriented on the hydrophylic substrate. GIXRD studies, carried out on films sufficiently thick to allow the observation of the diffraction pattern, reveled the presence of a lamellar structure with a spacing of 3.22 nm. The low intensity of the diffraction peaks and the isotropic linear optical properties of the films show that the lamellar mesophases are not extended over large areas. These findings were compared with the data obtained from AFM and SEM studies on films of two other polydiacetylenes, the poly[1-(3,6-dihexadexyl-N-carbazolyl)-6-(N-carbazolyl)-2,4-hexadyine] (polya-DCHD) and the poly[1,6-bis(3,6-dipalmitoyl-N-carbazolyl)-2,4-hexadyine] (polyDPCHD), spun on hydrophylic glass substrate. The results confirmed the presence of nodular morphologies which seem to be a general characteristic of this class of materials. The particles organization appears instead related to the chemical nature of the substituents on the carbazolyl rings.