Size-dependent electron chemical potential: Effect on particle charging

Electrostatic charging of particles of identical composition, but different sizes, is a poorly understood phenomenon that may be of importance in dust storms, generation of lightning, numerous technological applications involving solid particulates, and in the agglomeration of lunar dust and inter-stellar dust clouds. We show that under optical excitation, the relative magnitude of surface to volume de-excitation gives size-dependent electron and hole concentrations. The consequent differences in chemical potentials can lead to charge transfer between particles of different size. The direction of charge transfer, from large to small or vice versa, depends critically on the properties of the materials.     

Transmission Electron Microscopic Investigation of the Morphology of High-Speed Spun Poly(Ethylene Terephthalate) Fibers

Permanganic etching was performed on high-speed spun (HSS) and regular fibers of poly(ethylene terephthalate) (PET), and their surface morphologies were investigated via the two-stage carbon replica method using a transmission electron microscope (TEM). The HSS PET fibers, with disordered amorphous regions, showed peculiar surface morphology; many small warts corresponding to the pits of etched disordered amorphous regions were observed. Such unevenness, however, was hardly observed on the surface of the permanganic-etched regular PET fibers, with well-oriented amorphous regions, or on the surface of alkali-etched HSS PET fibers. The permanganic etchant removed the disordered amorphous regions more preferentially compared with the alkali etchant.     

Ultrasonic evidence for short-range charge-ordering state in the low-doping regime of La1– x Sr x FeO3 (1/3 ≤ x ≤ 0.45)

The longitudinal ultrasonic velocity (V) and attenuation at a frequency of 10?MHz, as well as magnetization and resistivity, have been measured in the single-phase polycrystalline La_{1– x} Sr _x FeO₃ (x?=?1/3, 0.4, 0.45). Upon cooling down from high temperature, a slight softening in V and dramatic stiffening are observed in all samples, and this stiffening is coincided with a big attenuation peak. The relative increase of V is proportional to the Sr concentration, which implies that this anomaly is strongly correlated with Fe⁴⁺. However, no obvious changes in magnetic and electric properties are found at this temperature range. The analysis suggests that this feature may be caused by the Jahn–Teller effect of Fe⁴⁺ and correspond to the formation of short-range charge-ordering state.     

铋化物发光玻璃中银表面等离激元对铒离子的发光增强作用

局域表面等离激元可以由自由空间的光直接激发,这也是局域表面等离激元的优点所在。研究铋化物发光玻璃中纳米银颗粒的表面等离激元对铒离子发光的增强效应、进一步的提高铋化物发光玻璃中铒离子的发光性能很有意义。首先,测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃与(B)Er 3+(0.5%):铋化物发光玻璃样品的吸收谱,发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃在约600.0 nm处有一个较弱的宽的银表面等离激元共振吸收峰。同时发现两者都有典型的铒离子的吸收峰,它们的吸收几乎完全一样:在波峰形状、峰值强度和峰值波长等方面都很相近。测量了(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃和(B)Er 3+(0.5%):铋化物发光玻璃样品的激发谱,发现有位于379.0,406.0,451.0,488.0和520.5 nm的5个550.0 nm可见光的可见激发谱峰,和位于379.0,406.5,451.0,488.5,520.5,544.0,651.5和798.0 nm的8个1531.0 nm红外光的红外激发谱峰,容易指认出依次为Er 3+的4I 15/2→4G 11/2,4I 15/2→2H 9/2,4I 15/2→(4F 3/2,4F 5/2),4I 15/2→4F 7/2,4I 15/2→2H 11/2,4I 15/2→4S 3/2,4I 15/2→4F 9/2和4I 15/2→4I 9/2跃迁的吸收峰,通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外激发谱的最大增强依次分别是238%和133%。最后,测量了它们的发光谱,发现有位于534.0,547.5和658.5 nm的三组可见发光峰,容易指认出依次为Er 3+的2H 11/2→4I 15/2,4S 3/2→4I 15/2,4F 9/2→4I 15/2荧光跃迁。还发现红外发光峰位于978.0和1531.0 nm,依次为Er 3+的4I 11/2→4I 15/2和4I 13/2→4I 15/2的荧光跃迁。通过测量发现(A)Er 3+(0.5%)Ag(0.5%):铋化物发光玻璃相对于(B)Er 3+(0.5%):铋化物发光玻璃样品的可见和红外发光谱的最大增强依次分别是215%和138%。对于银表面等离激元增强铒离子发光的机理,认为主要为纳米银颗粒的局域表面等离激元共振,造成金属纳米结构附近产生的局域电场的强度要远大于入射光的电场强度,从而导致了金属纳米结构对入射光产生强烈的吸收和散射,进而导致了荧光的增强;即局域表面等离子体共振局域场的场增强效应。     

考虑地表反射类型的气溶胶散射偏振特性

采用逐次阶散射法求解矢量辐射传输方程来研究气溶胶在不同地表反射模型下的散射偏振特性.首先,选取单一地表反射模型和耦合地表反射模型两种地表反射模型.然后,根据地表反射模型计算得到相应的地表反射率,进而采用逐次阶散射法对矢量辐射传输方程进行求解,得到散射光的Stokes矢量.最后,由Stokes矢量计算得出散射光的偏振度.仿真结果表明,两种地表反射模型下气溶胶单次散射的散射辐射强度和线偏振度均相等;耦合地表反射模型的总散射辐射强度和线偏振度总是大于单一地表反射模型;单一地表反射模型的气溶胶单次散射相对总散射的贡献总是大于耦合地表反射模型.研究结果对气溶胶光学特性的反演具有一定意义.     

Mixed Fano-SP resonant absorption of THz electromagnetic waves in a photonic resonator contacting with a metal film

In terahertz frequency region, we have investigated theoretically the correlation between spectra of a free photonic structure and that deposited on a metal for several models of metal. It was found that for quasi-normal incidence of p-polarized electromagnetic field the presence of metal generates narrow spectral wells in the middle of reflection windows existing in a free photonic crystal. Quite another manifestation of metal-resonator inter-influence takes place at incident angles exceeding the Brewster angle when reflection spikes coincide with modes of photonic crystal resonator and they are absent throughout the stopband areas. The effects are strongly depended on polarization, number of periods and angle of incidence.     

Wettability and surface energy of parylene F deposited on PDMS

For the first time, the wettability and surface energy of parylene F were investigated. The results showed that parylene F had a hydrophobic surface with an eigen water contact angle of 104.7 ± 0.6°. We found that 3.5 μl probe liquid was an optimal value for the contact angle measurement of parylene F. Moreover, we found that the Lifshitz–van der Waals/acid–base approach was unsuitable for determining the surface energy of parylene F, whereas the Owens–Wendt–Kaelble approach and the limitless liquid–solid interface wetting system were compatible. The surface energy of parylene F was estimated to be 27.06 mJ/m² (Owens–Wendt–Kaelble) and 40.41 mJ/m² (Limitless liquid-solid interface wetting system). Furthermore, this investigation also provided a reference for the applications of empirical and physics-based semi-empirical approaches for the estimation of surface energy.     

Damage characteristics and surface description of near-wall materials subjected to ultrasonic cavitation

For the analysis of ultrasonic cavitation erosion on the surface of materials, the ultrasonic cavitation erosion experiments for AlCu4Mg1 and Ti6Al4V were carried out, and the changes of surface topography, surface roughness, and Vickers hardness were explored. Cavitation pits gradually expand and deepen with the increase of experiment time, and Ti6Al4V is more difficult to erode by cavitation than AlCu4Mg1. After experiments, the cavitation damage characteristics such as the single pit, the rainbow ring area, the fisheye pit, and some small pits were observed, which can be considered to be induced by a single micro-jet impact, ablation effect caused by the high temperature, micro-jet impingement with a sharp angle, and multibeam micro-jets coupling impact or negative pressure in the local area produced by micro-jet impact, respectively. The surface roughness and Vickers hardness of the material increase slowly after rapid growth at different points in time as the experiment time increases. With the increase of the ultrasonic amplitude, both of them first increase and then decrease after the ultrasonic amplitude is greater than 10.8 μm. The increases in surface roughness and Vickers hardness tend to decrease as the viscosity coefficient increases. Ultrasonic cavitation can cause submicron surface roughness and increase surface hardness by 20.36%, so it can be used as a surface treatment method.     

Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface

Muscovite mica is a widely accepted substrate for scanning probe microscopy (SPM) investigations. However, mica has intrinsic properties that alter samples and obstruct their analysis due to free charges build-up, ionic exchange and water adsorption taking place at the surface. In addition to interfacial phenomena, there is a growing interest in electrostatic charges on insulators as they are crucial in diverse applications. Despite the high demand for studies of this nature, experimental set-ups capable of resolving charge build-up at the micro-scale are still scarce and technically limited. Here, we report the imaging of surface charge dissipation on freshly cleaved mica by Kelvin-probe Force Microscopy (KPFM). A local electrostatic charge micro-domain was generated by friction between an atomic force microscope (AFM) tip and mica, and its decay was tracked by two-dimensional mapping using KPFM. We found time-dependent charge dissipation, which is attributed to the adsorption of water molecules on mica surface.     

限域量子态调控研究

电子、激子和声子等量子态在固体中的行为早已被人们所熟知. 然而,当体系的尺寸只有纳米量级的时候,已有的固体理论常常不能适用,需要新的低维物理理论的建立. 我们系统研究了低维体系限域量子态（包括电子、激子和声子）的行为对环境、应力、压力及光的响应和性质的调控. 较早认识到低维体系之显著的表面-体积比对量子态性质调控之有效性,系统地揭示了低维体系的一系列由表面和应力决定的新颖性质,证明了低维体系的表面和应力效应同量子限域效应同等重要. 本文概况了如下五个方面的结果：（1）一种使用应力效应调控电子能带结构的方法和（2）一种使用表面效应调控电子能带结构的方法（这两个方法都可将低维体系能带从间接能隙调控至直接能隙能带结构）;（3）一种低维体系表面掺杂方法,该方法将在低维体系掺杂中取代传统方法;（4）量子点表面诱导的光致异构现象;（5）基于表面自催化半导体低维结构的形成机理. 希望我们的研究工作有助于促进低维体系在光电子、纳电子、环境、能源、生物和医学等领域的应用.