Mixed valency in the high-temperature phases of transition metal molybdates, A MoO4 ( A =Fe, Co, Ni)

Transition metal molybdates of the formulaAMoO₄ whereA=Fe, Co or Ni exhibit a first-order phase transition between 670K–970K. An investigation of the lowtemperature (lt) and high-temperature (ht) phases by x-ray photoelectron spectroscopy, x-ray absorption spectroscopy, magnetic susceptibility and other physical methods shows that the phase transition is associated with a valence change of the typeA ²⁺+Mo⁶⁺αA ³⁺+Mo⁵⁺ in the cases of iron and cobalt molybdates. Contribution No. 311 from the Solid State and Structural Chemistry Unit.     

Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.     

Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography

Silica particles have been used as supports for the preparation of three different propazine-imprinted polymer formats. First format refers to grafting of thin films of molecularly imprinted polymers (MIPs) using an immobilised iniferter-type initiator (inif-MIP). The other two new formats were obtained by complete filling of the silica pores with the appropriate polymerisation mixture leading to a silica-MIP composite material (c-MIP) followed by the dissolution of the silica matrix resulting in spherical MIP beads (dis-MIP). These techniques offer a mean of fine-tuning the particle morphology of the resulting MIP particles leading to enhanced capacity in chromatographic applications. Porous silica (specific surface area S = 380 m² g⁻¹, particle size p_s = 10 μm, pore volume V_p = 1.083 ml g⁻¹ and pore diameter d_p = 10.5 nm), methacrylic acid and ethylenglycol dimethacrylate were used for the preparation of the materials. All the MIP formats imprinted with propazine have been characterised by elemental analysis, FT-IR spectroscopy, nitrogen adsorption and scanning electron microscopy. Further, the materials were assessed as stationary phases in HPLC. Capacity factors, imprinting factors and theoretical plate numbers were calculated for propazine and other related triazines in order to compare the chromatographic properties of the three different stationary phases. For the inif-MIPs the column efficiency depended strongly on the amount of grafted polymer. Thus, only the polymers grafted as thin films of ca. 1.3 nm average thickness show imprinting effects and the highest column efficiency giving plate numbers (N) of 1600 m⁻¹ for the imprinted propazine. The performance of the c-MIP stationary phase decreases as result of the complete pore filling after polymerisation and increases again after the removal of the silica matrix due to a better mass transfer in the porous mirror-image resulting polymer. From this study can be concluded that the inif-MIP shows the best efficiency for use as stationary phase in HPLC for the separation of triazinic herbicides.     

Correlation between excess adsorption data measured for solvent mixture/adsorbent systems and RM values obtained for different solutes chromatographed in binary mobile phases

This paper concerns the application of excess adsorption isotherms, measured for solvent mixture/adsorbent systems, to the characterization of TLC data. For this purpose the excess adsorption isotherms for three liquid mixtures: cyclohexane/ benzene, benzene/acetone, and carbon tetrachloride/ethyl acetate on silica gel at 20°C have been measured. These mixtures have been used as binary mobile phases in TLC measurements. It has been shown for a given solute in binary mobile phase that the quantity R_M is a simple function of the excess adsorption. Parameters of this function have been used to characterize chromatographic systems with binary mobile phases.     

Cholesterol modulates amiodarone-membrane interactions in model and native membranes

The effects of cholesterol, a lipid mostly found in the sarcolemmal membranes, on the interaction of amiodarone with synthetic models of dimyristoylphosphatidylcholine (DMPC) and with native models of mitochondria and brain microsomes was studied. Alterations on the structural order of lipids were assessed by fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) probing the bilayer core, and of the propionic acid derivative 3-(p-(6-phenyl)-1,3,5-hexatrienyl)phenylpropionic acid (DPH-PA) probing the outer regions of the bilayer. As detected by the probes and according to classic observations, cholesterol progressively increased the molecular order in the fluid phase of DMPC. Additionally, it modulated the type and extension of amiodarone effects. For low cholesterol concentrations (≤10–15 mol%), amiodarone (50 μM) ordered DMPC bilayers and the effects were almost identical to those observed in pure DMPC. For higher cholesterol concentrations, amiodarone ordering effects decreased slightly and faded for cholesterol concentrations as high as 25 and 30 mol%, when detected by DPH-PA and DPH, respectively. Above these high cholesterol concentrations, a crossover from ordering to disordering effects of amiodarone was apparent, either in the upper region of the bilayer or the hydrophobic core. The effects of amiodarone in native membranes of mitochondria and brain microsomes, in which "native" cholesterol accounts for about 0 and 25 mol%, respectively, correlated reasonably with the results in models of synthetic lipids. There is a close relationship between cholesterol concentration and amiodarone effects, in either synthetic models or native model membranes. Therefore, it may be predicted that the lipid physicochemical properties regulated by cholesterol concentration will also modulate the effects of amiodarone in sarcolemma.     

Micelles as pseudo-stationary phases in micellar electrokinetic chromatography

This review article describes some general comments on micellar electrokinetic chromatography (MEKC) from the viewpoint of pseudo-stationary phases and presents a compiled list of surfactants used for MEKC, prepared from published papers. We tried to give comments on some typical surfactants from the practical point of view.     

Cyclodextrins with heterocyclic substitution as GC stationary phases

Summary Two new cyclodextrin (CD) derivatives, heptakis{2,6-di-O-pentyl-3-O-[3′-(2″-chloro-4″,5″-dioxylmethene)-phenyl-5′-iso-oxazolylmethyl]}-β-CD (CD I) and heptakis{2,6-di-O-methyl-3-O-[3′-(2″-chloro)-phenyl-5′-iso-oxazolylmethyl]}-β-CD (CD II) were synthesized and coated on fused-silica capillary columns. Their chromatographic characteristics, including column efficiency, polarity, selectivity and phase transition were studied and compared with similar β-CD stationary phases. It was found that the heterocycle group has a significant effect on the selectivity of the CD stationary phases. Both stationary phases can be successfully used to separate many di- and trisubstituted benzene positional isomers and show stronger separation ability in separating low-polarity benzene positional isomers than other β-CD stationary phases.     

Chiral stationary phases for LC and SFC obtained by “Polymer coating”

Summary Chirally substituted Si–H-containing polysiloxanes were synthesized, which can be immobilized on small particle silica gel as well as on the smooth surfaces of fused silica capillaries. Immobilization is achieved either by crosslinking or by chemical bonding to the surfaces via silanol groups; both reactions can only be performed by addition of H₂PtCl₆, which acts as catalyst for hydrosilylation and as stoichiometric reagent for crosslinking. Chiral substituents of systematically varied chemical structure were introduced into the polysiloxanes by hydrosilylation. The mechanism of immobilization was investigated by spectroscopic methods, notably²⁹Si-NMR. Homogenous stationary-phase coatings of variable film thickness and corresponding retentivity can easily be achieved. The enantioselectivity of the phase systems was characterized in dependency on the chemical structure of the chiral selectors attached to the polysiloxane chain of the chiral stationary phases and also in terms of the functional groups introduced into the solutes by derivatisation.     

The effect of the structure of bonded cyanoalkyl stationary phases on their selectivity in the liquid chromatographic separation of polynuclear aromatic hydrocarbons

Summary The paper discusses the effect of the length and structure of the hydrocarbon chain connecting the nitrile group to the silica gel surface on the chromatographic properties of cyanoalkyl phases.When using non-polar and polar mobile phases, the selectivity of the cyanodecyl phases toward PAHs is higher than of the cyanopropyl phase and of hydroxylated silica gel.Polar additives to the mobile phase drastically decrease the retention on silica gel and on the cyanopropyl phase while affect the properties of cyanodecyl phases only to a considerably less degree. Newly synthesized phases with different structures of the hydrocarbon chain are compared with the commerical cyano-and ODS-phases. The retention mechanism on the cyanoalkyl phases is discussed.     

Comparison of enantiomer separation on two chiral stationary phases derived from (+)-18-crown-6-2,3,11,12-tetracarboxylic acid of the same chiral selector

Liquid chromatographic comparisons for enantiomer resolution of α-amino acids and chiral primary amino compounds were made using chiral stationary phases (CSPs) prepared by covalently bonding (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid (18-C-6-TA) of the same chiral selector. The resolution of all α-amino acids on CSP 1 developed in our group was found to be better than that on CSP 2 reported by Machida et al. All α-amino acids examined in this study were well enantioseparated on CSP 1 (α=1.22–2.47), while four analytes were not resolved or all the other analytes were poorly resolved on CSP 2 than on CSP 1. However, in resolving the primary amino compounds without a carbonyl group, CSP 1 was comparable with CSP 2. Although (+)-18-C-6-TA of the same chiral selector was used to prepare CSP 1 and CSP 2, this study showed that different connecting methods for the CSPs might influence their ability to resolve the analytes depending on their structures related to the chiral recognition mechanism.