SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

A PENNY-SHAPED CRACK IN A MAGNETOELECTROELASTIC LAYER UNDER RADIAL SHEAR IMPACT LOADING

This paper analyzes the dynamic magnetoelectroelastic behavior induced by a penny- shaped crack in a magnetoelectroelastic layer.The crack surfaces are subjected to only radial shear impact loading.The Laplace and Hankel transform techniques are employed to reduce the prob- lem to solving a Fredholm integral equation.The dynamic stress intensity factor is obtained and numerically calculated for different layer heights.And the corresponding static solution is given by simple analysis.It is seen that the dynamic stress intensity factor for cracks in a magnetoelec- troelastic layer has the same expression as that in a purely elastic material.And the influences of layer height on both the dynamic and static stress intensity factors are insignificant as h/a>2.     

Evaluation of the Lazarus-Leblond constants in the asymptotic model of the interfacial wavy crack

The paper addresses the problem of a semi-infinite plane crack along the interface between two isotropic half-spaces. Two methods of solution have been considered in the past: Lazarus and Leblond [1998a. Three-dimensional crack-face weight functions for the semi-infinite interface crack-I: variation of the stress intensity factors due to some small perturbation of the crack front. J. Mech. Phys. Solids 46, 489-511, 1998b. Three-dimensional crack-face weight functions for the semi-infinite interface crack-II: integrodifferential equations on the weight functions and resolution J. Mech. Phys. Solids 46, 513-536] applied the “special” method by Bueckner [1987. Weight functions and fundamental fields for the penny-shaped and the half-plane crack in three space. Int. J. Solids Struct. 23, 57-93] and found the expression of the variation of the stress intensity factors for a wavy crack without solving the complete elasticity problem; their solution is expressed in terms of the physical variables, and it involves five constants whose analytical representation was unknown; on the other hand, the “general” solution to the problem has been recently addressed by Bercial-Velez et al. [2005. High-order asymptotics and perturbation problems for 3D interfacial cracks. J. Mech. Phys. Solids 53, 1128-1162], using a Wiener-Hopf analysis and singular asymptotics near the crack front.The main goal of the present paper is to complete the solution to the problem by providing the connection between the two methods. This is done by constructing an integral representation for Lazarus-Leblond's weight functions and by deriving the closed form representations of Lazarus-Leblond's constants.     

横观各向同性压电材料中裂纹问题的边界元法

采用Somigiliana公式给出了三维横观各向同性压电材料中的非渗漏裂纹问题的一般解和超奇异积分方程,其中未知函数为裂纹面上的位移间断和电势间断．在此基础上,使用有限部积分和边界元结合的方法,建立了超奇异积分方程的数值求解方法,并给出了一些典型数值算例的应力强度因子和电位移强度因子的数值结果,结果令人满意．     

地表温度对颗粒跃移轨迹的影响

为了研究由地表温度变化引起的向上的垂向气流对沙粒跃移运动的影响,本文给出了考虑近地表温度变化和水平来流风场作用下的沙粒的跃移运动。在定量给出不同时刻的近地表温度和垂向风速的基础上,计算了由于太阳辐射所引起的近地表层垂向气流对沙粒跃移运动的影响,发现:垂向风速在午后可达到1.5m/s并使得沙粒跃移轨迹的最大高度和长度分别增加55.56%和73.68%;同时,与不考虑温度效应的情况不同的是,沙粒跃移轨道最大高度将随粒径变化。     

Variation of the stress intensity factor along the front of a 3-D rectangular crack subjected to mixed-mode load

Summary  The singular integral equation method is applied to the calculation of the stress intensity factor at the front of a rectangular crack subjected to mixed-mode load. The stress field induced by a body force doublet is used as a fundamental solution. The problem is formulated as a system of integral equations with r ⁻³-singularities. In solving the integral equations, unknown functions of body-force densities are approximated by the product of polynomial and fundamental densities. The fundamental densities are chosen to express two-dimensional cracks in an infinite body for the limiting cases of the aspect ratio of the rectangle. The present method yields rapidly converging numerical results and satisfies boundary conditions all over the crack boundary. A smooth distribution of the stress intensity factor along the crack front is presented for various crack shapes and different Poisson's ratio. Received 5 March 2002; accepted for publication 2 July 2002     

Residual stress field and reduction of stress intensity factors in cold-worked holes

Closed-form and semi-analytical solutions are obtained for the residual stress distributions in a plate caused by pressure acting on a central circular hole, representing the cold-work process. The material is elastic–perfectly plastic. Both Tresca and von Mises yield criteria are used and the corresponding residual stress distributions are compared. The relation between the dimension of the plastic zone and the value of internal pressure is presented. The relation between the magnitude of the residual stresses and the remote uniform tensile stress required to open symmetrical radial cracks is also presented. The reduction of the stress intensity factors of cracked open and riveted holes as a function of the internal pressure applied (or mandrel radial displacement) is investigated using numerical models for both an elastic–perfectly plastic material and for an Al 2024-T3 Alclad aluminum alloy.     

A study on stress intensity factors and singular stress fields of three-dimensional interface crack

By using the finite-part integral concepts and limit technique, the hypersingular integrodifferential equations of three-dimensional (3D) planar interface crack were obtained; then the dominant-part analysis of 2D hypersingular integral was further used to investigate the stress fields near the crack front theoretically, and the accurate formulae were obtained for the singular stress fields and the complex stress intensity factors. After that, a numerical method is proposed to solve the hypersingular integrodifferential equations of 3D planar interface crack, and the problem of elliptical planar crack is then considered to show the application of the method. The numerical results obtained are satisfactory. Project supported by the Foundation of Solid Mechanics Open Research Laboratory of State Education Commission at Tongji University and the National Natural Science Foundation.     

Green function and its application for a piezoelectric plate with various openings

Summary For a two-dimensional piezoelectric plate subjected to mechanical and electric load, a Green function satisfying traction free and exact electric boundary conditions along a hole is developed using Lekhnitskii's formalism and the technique of conformal mapping. The critical points for the mapping function used is investigated numerically, and the study indicates that the transformation of a polygonal hole in a piezoelectric plate into a unit circle is nonsingle-valued. A simple approach is presented to treat such a situation. Based on the Green function developed in this paper, a system of singular integral equations for the unknown dislocation defined on crack faces is presented to study the interaction between cracks and holes. Numerical results are presented to elucidate the effects of crack orientation on stress and electric displacement (SED) intensity factors and to illustrate the application of the proposed formulation. Received 4 June 1998, accepted for publication 15 July 1988     

Experimental caustics analysis in fracture mechanics of anisotropic materials

The originally developed reflection method of caustics is presented for application to cracks in mechanically anisotropic materials such as fiber-reinforced composites. The derived solutions for the combination of crack-opening modes I and II show that the size of the dark spot depends on the load intensity, whereas its shape depends strongly on the mechanical properties of the material, the orientation of the crack tip and the mixed-mode mixture. The evaluation of optical effects is possible using the diameter-measuring method or the advanced multipoint overdeterministic data reduction method. To find the exact position of caustics, the experimental images are analyzed by the simple boundary value method and a more sophisticated differential method, which is accomplished by shifting the real image onto the gradient image. The standard experimental testing procedure is performed for cracks oriented 0 deg, 45 deg and 90 deg to the material axes in carbon-fiber-reinforced polymer composites.