Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Free‐energy differences between states with different conformational ensembles

Multiple conformations separated by high‐energy barriers represent a challenging problem in free‐energy calculations due to the difficulties in achieving adequate sampling. We present an application of thermodynamic integration (TI) in conjunction with the local elevation umbrella sampling (LE/US) method to improve convergence in alchemical free‐energy calculations. TI‐LE/US was applied to the guanosine triphosphate (GTP) to 8‐Br‐GTP perturbation, molecules that present high‐energy barriers between the anti and syn states and that have inverted preferences for those states. The convergence and reliability of TI‐LE/US was assessed by comparing with previous results using the enhanced‐sampling one‐step perturbation (OSP) method. A linear interpolation of the end‐state biasing potentials was sufficient to dramatically improve sampling along the chosen reaction coordinate. Conformational free‐energy differences were also computed for the syn and anti states and compared to experimental and theoretical results. Additionally, a coupled OSP with LE/US was carried out, allowing the calculation of conformational and alchemical free energies of GTP and 8‐substituted GTP analogs. © 2013 Wiley Periodicals, Inc.     

Contact Angle Determined by Spontaneous Imbibition in Porous Media: Experiment and Theory

In this paper, a theoretical model was established to determine the contact angle by introducing a new defined effective capillary radius into the Lucas–Washburn equation. Based on the theoretical model, capillary rise experiments of water imbibed by different glass beads were carried out to measure the contact angle; the results were similar to the available data published in the literature. In addition, the model was modified to take account of the dynamic contact angle, according to the experimental data. The influence of the dynamic contact angle on the movement of the spontaneous imbibition was studied.     

Contact Angle Measurement for Dispersed Microspheres Using Scanning Confocal Microscopy

Abstract

Scanning confocal microscopy was used for contact angle measurement of individual microspheres. The measurements were carried out by using different laser‐scanned layers of the particle floating on the air–water interface. The ratio of the diameter for the cross‐section of the protruded area of the particle at the air–water interface to the actual diameter of the particle is used for contact angle measurements. Two systems, i.e., glass and polystyrene microspheres with diameters of 3–10 and 6 µm, respectively, with water were used for this investigation (this size range of particles are most relevant to inhalation applications). Using the developed methodology, contact angles of 27° and 41° were measured (with water) for glass and polystyrene particles, respectively. The theoretical error in contact angle measurement for the developed methodology is determined to be generally about 1° with a maximum of 3° for contact angle of particles ranging from 2 to 24 µm in size; the experimental error was 4–6°. The contact angles of glass and polystyrene particles were compared to those obtained from pendant drop method and confirmed.     

Effect of Octadecanol on the Interfacial Dilational Properties of Surfactant/Polymer Systems

The effect of octadecanol on dilational properties of 4,5-diheptyl-2-propylbenzene sulfonate and partly hydrolyzed polyacrylamide at the decane-water interface has been examined by means of longitudinal method. The octadecanol plays different roles in influencing the structure of adsorbed layers at different bulk concentration. A small quantity of octadecanol may enhance the dilational modulus by forming densely packed mixed-adsorption layer with surfactant molecules through hydrophobic interaction, which leads to the increase of dilational modulus. However, due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules by the intercalation of octadecanol, the superfluous addition of octadecanol could decrease the dilational modulus. In the case of polymer/octadecanol system, the addition of the polymer may enhance the dilational modulus due to the slow diffusion-exchange process of the polymer.     

Influence of Interfacial Tension on Seeded Calcium Carbonate Scale Precipitation: Effect of Adsorbed Asphaltenes

Clay particles with adsorbed asphaltenes, which are commonly found in produced water, have been used as seed particles during precipitation of calcium carbonate in order to determine whether such particles may influence the kinetics of precipitation. The results show that the presence of the adsorbed asphaltenes accelerates the precipitation, and there is also a significant difference between different types of adsorbed asphaltenes. The adsorption of asphaltenes at the seed surface leads to a significant increase in the interfacial tension between the seed surface and the aqueous solution, and calcium carbonate therefore precipitates at the seed surface in order to reduce this high interfacial tension.     

Small‐Angle Neutron Scattering (SANS) Study of Magneto‐Vesicles

Small‐angle neutron scattering from magneto‐vesicles (MVs) prepared by extrusion was studied. Contrast variation allowed the determination of structure and sizes of the vesicles and the encapsulated magnetic nanoparticles, respectively. The results from MVs synthesized with a 0.3% volume fraction of citrate‐coated magnetic nanoparticles are compared to those of similarly prepared vesicles of the neutral lipid 1,2‐Dioleoyl‐sn‐Glycero‐3‐Phosphocholine (DOPC) (without magnetic particles), and magnetic particles not encapsulated in vesicles. It is observed that the bilayers of the as‐prepared MVs, and the encapsulated nanoparticles retain their structural properties, highlighting the suitability of the MVs for applications.     

Swelling of Water/Nonionic Surfactant Lamellar Liquid Crystals: A Model

A model is presented to provide quantitative measures to estimate the trends of the change in the penetration of the added component into the polar part of the amphiphile layer in lamellar liquid crystals of water and ethoxylated surfactants with added water (or polar solvents). The total thickness of the bi‐layer is treated as composed of an aqueous layer, of a layer of the polar groups from the surfactant and of the hydrocarbon chains of the latter. A fraction α of the added water is assumed penetrating the polar group layer leading to its expansion. The evaluation is built on the fact that experimental determinations of the interlayer spacing in the overwhelming majority of cases show a first order linear dependence on the ratio of added water. In the model this linearity is obtained by variation of the degree of penetration of water. The model indicated a reduction in the degree of penetration with added water, which is a rational trend. The model demonstrates the earlier interpretation of a structure, whose interlayer spacing is invariant with water contents as nonswelling; for example, in which all added water penetrates the amhiphile layer, is not appropriate. The model demonstrates the constancy of the interlayer spacing to be a consequence of a balance between the expansion of the amphiphile layer and the increase of a “free water” layer.     

A transflective and viewing angle controllable blue-phase liquid crystal display

A polymer-stabilised blue-phase liquid crystal display (PSBP-LCD) with double-side in-plane switching (DS-IPS) electrode structure is proposed. This structure shows the transflective characteristics because the bottom electrodes are made by aluminium material. For transflective displays, it exhibits a well-matched voltage-dependent transmission and reflection curves through designing the width and gap of the top electrodes. When a bias voltage is applied on the top electrodes, it exhibits as a good viewing angle controllable display.     

Molecular dynamics and conformational behaviour of mesogenic resorcinarenes

The dynamic and conformational behaviour of four mesogenic resorcinarenes exhibiting columnar mesophases have been studied by a combination of broadband dielectric spectroscopy and deuterium solid state NMR. Broadband dielectric spectroscopy provided evidence for two relaxation processes present both in the mesophase and in the isotropic liquid. The high frequency process II, common to all mesogens, has been assigned to the libration of the carbonyl groups of the ester junctions between the core and the side chains. The low frequency process I, present in conformationally mobile mesogens 1 and 2, has been attributed to the ring inversion process of the macrocyclic core associated with dipole inversion along the columnar axis. Deuterium solid state NMR performed on 4, the deuteriated analogue of 1, confirmed the molecular dynamics attribution for process I, assigning the ring inversion to the interconversion of the two equivalent crown conformations.