Breakdown limits of optical multimode fibers for the application of nanosecond laser pulses at 532 nm and 1064 nm wavelength

For many applications, optical multimode fibers are used for the transmission of powerful laser radiation. High light throughput and damage resistance are desirable. Laser-induced breakdown at the end faces of fibers can limit their performance. Therefore, the determination of laser-induced damage thresholds (LIDT) at the surface of fibers is essential.Nanosecond (1064 nm and 532 nm wavelength) single-shot LIDT were measured according to the relevant standard on SiO₂ glass preforms (Suprasil F300) as basic materials of the corresponding fibers. For 10 kinds of fused silica fibers (FiberTech) with core diameters between 180 μm and 600 μm, an illumination approach utilizing a stepwise increase of the laser fluence on a single spot was used. For both wavelengths, the LIDT values (0% damage probability) obtained by means of the two methods were compared. The influence of surface preparation (polishing) on damage resistance was investigated. For equal surface finishing, a correlation between drawing speed of the fibers and their surface LIDT values was found. In addition to the surface measurements, bulk LIDT were determined for the preform material.     

双椭圆纳米金属棒构成的表面等离子体波导的传输特性分析

设计了一种双椭圆纳米金属棒表面等离子体波导,采用频域有限差分法,对这种波导所支持的基模的能流密度分布、有效折射率和传播长度随几何结构参数和工作波长的依赖关系进行了分析.结果表明,沿纵向的能流主要分布在两个椭圆金属棒所形成的中间区域,且越靠近金属棒的弧形边,沿纵向的能流越大.通过调节两个金属棒的中心距离以及它们的两个半轴的大小,可以调节模式的有效折射率和传播长度.在工作波长确定的条件下,相对于a=b的情形来说,在a<b时,场与金属表面接触的面积较大,场 关键词： 集成光学 光波导 表面等离子体波导     

Time-resolved imaging of mode-conversion process of terahertz transients in subwavelength waveguides

We studied the mode-conversion process of terahertz pulses from a planar subwavelength waveguide to a tilted rectangular subwavelength waveguide. An unusual wavefront rotation, which led to an extra conversion time, was observed using a time-resolved imaging technique. We simulated the mode conversion process by a finite-difference time-domain method, and the results agreed well with the experiments. According to the simulations, the conversion time was demonstrated to become longer as the tilt angle or width of the rectangular waveguide increased. This work provides the possibility to optimize the future high-speed communications and terahertz integrated platforms.     

下一代直线对撞机失谐结构尾场的精确计算—盘荷波导电磁场的研究

利用变分法研究了周期性盘荷波导中零极模、二极模及更高极模式的电磁场特性.该方法考虑了栏片的圆弧,对真实结构没有做任何近似,是一种高精度方法,计算表明该方法的结果与实验测量值基本符合,与其它程序相比有很高的计算精度.这为下一步精确研究下一代直线对撞机失谐结构的尾场提供了一个很好的方法与工具.     

梯形截面脊波导的特性分析

提出了用有效折射率法结合转移矩阵理论对梯形截面脊波导进行数值分析的新方法。对梯形截面脊波导中模式传播常数和模式间耦合系数的分析表明,梯形截面脊波导与稍宽的矩形截面脊波导行为相同。这一结论有利于简化梯形截面脊波导的设计,提高实际器件的精度。     

Linear and Nonlinear Optical Characterization of PolyDCHD-HS Films

Waveguiding films of the highly soluble polycarbazolydiacetylene polyDCHD-HS were prepared by spin coating and characterized at different wavelengths: 5 dB/cm propagation losses were observed at 1321 nm.Measurements of the third order nonliearity at 1064nm with the surface plasmon resonance method gave the valueχ(3)= i4.4×10-17+3.5×10-18 m2/V2.     

Electro‐optic Polymer Ring Resonator Modulator on a Flat Silicon‐on‐Insulator

Optical polymers are a promising material of choice in the development of hybrid silicon photonics devices. Particularly, recent progress in electro‐optic (EO) active polymers has shown a strong Pockels effect. A ring resonator modulator is a vital building block for practical applications, such as signal processing, routing, and monitoring. However, the properties of the hybrid silicon and EO polymer ring modulators are still far from their theoretical limits. Here, we demonstrate a unique design of a hybrid ring resonator modulator simply located onto a silicon‐on‐insulator (SOI) substrate. Extra doping and etching of the SOI wafer is not required, even so we measured an in‐device electro‐optic coefficient r₃₃ = 129 pm/V. The ring modulator exhibited a high sensitivity of the electrically tunable resonance, which enabled a 3 dB bandwidth of up to 18 GHz. The proposed technique will enable efficient mass‐production of the micro‐footprint modulators and promote the development of integrated silicon photonics.     

Compact surface plasmon amplifier in nonlinear hybrid waveguide

Surface plasmon polariton(SPP), a sub-wavelength surface wave promising for photonic integration, always suffers from the large metallic loss that seriously restricts its practical application. Here, we propose a compact SPP amplifier based on a nonlinear hybrid waveguide(a combination of silver, LiNbO_3, and SiO_2), where a couple of Bragg gratings are introduced in the waveguide to construct a cavity. This special waveguide is demonstrated to support a highly localized SPP-like hybrid mode and a low loss waveguide-like hybrid mode. To provide a large nonlinear gain, a pumping wave input from the LiNbO_3 waveguide is designed to resonate inside the cavity and satisfy the cavity phase matching to fulfill the optical parametric amplification(OPA) of the SPP signal. Proper periods of gratings and the cavity length are chosen to satisfy the impedance matching condition to ensure the high input efficiency of the pump wave from the outside into the cavity. In theoretical calculations, this device demonstrates a high performance in a very compact scheme(~3.32 μm) and a much lower pumping power for OPA compared with single-pass pumping. To obtain a comprehensive insight into this cavity OPA, the influences of the pumping power, cavity length, and the initial phase are discussed in detail.     

Rigorous analysis of optical forces between two dielectric planar waveguides immersed in dielectric fluid media

This work presents a rigorous analysis of optical forces between planar waveguides immersed in an arbitrary background medium. This approach exploits the Minkowski stress tensor formulation, which is compared with a normalized version of the dispersion relation method, showing excellent results agreement for different dielectric fluid media. Due to slot‐waveguide effect, optical forces from TM modes are more sensitive to changes in the fluid refractive index than the TE counterparts. Furthermore, the repulsive optical force from the antisymmetric TM1 mode becomes stronger for higher refractive indexes, whereas the attractive force of the symmetric TM0 mode becomes weaker. The methodology and results presented in this work provide a rigorous analysis of nano‐optomechanical devices actuated by optical forces in a broad range of materials and applications. Therefore, this study may impact areas of light‐induced interactions presenting novel optofluidic and optomechanical functionalities, thus finding applications in nanoscale transport, sensing and manipulation.

     

Low loss smart hollow waveguides with new polymer coating material

A new kind of cyclic olefin polymer COP-E48R has been selected as the dielectric material for a silver hollow glass tube. Owing to its lower extinction coefficient at the wavelength of 10.6 μm, transmission losses for the CO₂ laser light has been reduced significantly in the COP-E48R-coated silver (COP-E48R/Ag) hollow glass waveguide. By properly selecting the film thickness of COP, Er:YAG and CO₂ laser light are shown to be transmitted with low loss simultaneously or independently. Delivery properties of red and green pilot beams were also evaluated.