鸡骨素及其酶解液的美拉德反应产物挥发性风味成分比较分析

利用固相微萃取/气相色谱-质谱(SPME/GC-MS)联用与电子鼻(E-Nose)嗅探技术对鸡骨素美拉德反应产物(MRPs1)及鸡骨素酶解液美拉德反应产物(MRPs2)中的挥发性风味成分进行比较分析。在两种产物中共鉴定出77种挥发性化学成分,其中醇类18种、醛酮类23种、酸类3种、酯类10种、杂环类7种及其他类16种,两种产物中共有成分26种。与MRPs1相比,MRPs2中醛酮、杂环类化合物的相对含量较高,但前者的酯类物质含量更为丰富。(E)-2-辛烯-1-醇、(6Z,9Z)-十五碳二烯-1-醇、苯甲醛、辛醛、6-甲基-5-庚烯-2-酮、2-乙基-3-羟基-4(4H)-吡喃酮、2,3,5-三甲基-6-乙基吡嗪、2-[(甲基二硫基)甲基]呋喃构成了MRPs2的特有成分,γ-丁位十二内酯为MRPs1的特有成分。在两种反应产物中,除4-甲基-5-羟乙基噻唑的相对含量均较高外(MRP1相似文献   

Micro-CT参数对骨质疏松性椎体压缩性骨折术后复发的预测价值

本研究探讨Micro-CT参数对骨质疏松性椎体压缩性骨折(OVCF)患者术后复发的预测价值。选取OVCF患者127例,根据术后6个月骨折复发情况分为复发组(n=41)与未复发组(n=86)。患者均接受Micro-CT检查,对比两组Micro-CT参数,即骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)、骨小梁间隙(Tb.Sp)、结构模型指数(SMI),以及骨密度(BMD)、骨矿含量(BMC),分析各参数与BMD、BMC及术后复发相关性,并评价各参数对术后复发的预测价值。结果显示,复发组骨体积分数(BV/TV)、骨小梁厚度(Tb.Th)低于未复发组,骨小梁间隙(Tb.Sp)、结构模型指数(SMI)高于未复发组(P<0.05);BV/TV、Tb.Th与骨密度(BMD)、骨矿含量(BMC)呈正相关,Tb.Sp、SMI与BMD、BMC呈负相关(P<0.05);将年龄、BMD、BMC等其他因素控制后,BV/TV、Tb.Sp、Tb.Th、SMI与OVCF术后骨折复发显著相关(P<0.05);BV/TV、Tb.Sp、Tb.Th、SMI联合预测OVCF术后骨折复发的曲线下面积(AUC)最大,为0.888(P<0.05)。提示Micro-CT参数在OVCF患者中呈异常表达,采用Micro-CT检查可为临床预测OVCF术后骨折复发提供科学指导。     

In-bone protein digestion followed by LC-MS/MS peptide analysis as a new way towards the routine proteomic characterization of human maxillary and mandibular bone tissue in oral surgery

Proteomic characterization of alveolar bones in oral surgery represents an analytical challenge due to their insoluble character. The implementation of a straightforward technique could lead to the routine use of proteomics in this field. This work thus developed a simple technique for the characterization of bone tissue for human maxillary and mandibular bones. It is based on the direct in-bone tryptic digestion of proteins in both healthy and pathological human maxillary and mandibular bone samples. The released peptides were then identified by the LC-MS/MS. Using this approach, a total of 1120 proteins were identified in the maxillary bone and 1151 proteins in the mandibular bone. The subsequent partial least squares–discrimination analysis (PLS-DA) of protein data made it possible to reach 100% discrimination between the samples of healthy alveolar bones and those of the bone tissue surrounding the inflammatory focus. These results indicate that the in-bone protein digestion followed by the LC-MS/MS and subsequent statistical analysis can provide a deeper insight into the field of oral surgery at the molecular level. Furthermore, it could also have a diagnostic potential in the differentiation between the proteomic patterns of healthy and pathological alveolar bone tissue. Data are available via ProteomeXchange with the identifier PXD026775.     

L-Arginine/nanofish bone nanocomplex enhances bone regeneration via antioxidant activities and osteoimmunomodulatory properties

In this study,a promising strategy has been developed to promote bone regeneration by combining antioxidant activities and osteoimmunomodulatory properties.Herein,an L-arginine/nanofish bone(Arg/NFB) nanocomplex has been prepared and evaluated in vitro and in vivo.The Arg/NFB nanocomplex possesses good antioxidant activities and could modulate the polarization of non-activated macrophage into different types and induce the secretion of pre-inflammato ry,anti-inflammatory,osteogenic as well as angiogenic cytokines.Additionally,the regulated immune microenvironment can enhance the osteogenic differentiation of mouse embryo osteoblast precursor cells(MC3 T3-E1) and angiogenic capacity of human umbilical vein endothelial cells(HUVECs),leading to the improved formation of mineralized nodules,alkaline phosphatase activity and angiogenic effects.In vivo results with cranial defect models reveal that the treatment of Arg/NFB nanocomplex exhibited significant improvement of new bone formation and angiogenesis.All the results demonstrate Arg/NFB nanocomplex with antioxidant activities and osteoimmunomodulatory properties could be a new idea for developing the next generation of bone regeneration biomaterials.     

Bone Dimensional Change Following Immediate Implant Placement in Posterior Teeth with CBCT: A 6-Month Prospective Clinical Study

This prospective clinical study aimed to evaluate the peri-implant hard tissue dimensional change at 6 months of immediate implant placement with bone graft materials in the posterior area using cone-beam computed tomography (CBCT). Twelve dental implants were placed concurrently following tooth extraction in the posterior area and filled with xenograft particles. The CBCT images were taken immediately after surgical procedures and then at 6 months follow-up. To evaluate the hard tissue changes, the vertical and horizontal bone thickness were analyzed and measured using ImageJ software. Paired t-test or Wilcoxon match-pair signed-rank test was done to analyze the changes of hard tissue values at the same level between immediately and 6 months following immediate implant placement. Independent t-test or Mann–Whitney U test was used to analyze the dimensional change in the vertical and horizontal direction in buccal and lingual aspects. The level of significance was set at p value = 0.05. All implants were successfully osseointegrated. At 6 months follow-up, the vertical bone change at the buccal aspect was −0.69 mm and at the lingual aspect −0.39 mm. For horizontal bone thickness, the bone dimensional changes at 0, 1, 5, and 9 mm levels from the implant platform were −0.62 mm, −0.70 mm, −0.24 mm, and −0.22 mm, respectively. A significant bone reduction was observed in all measurement levels during the 6 months after implant placement (p value < 0.05). It was noted that even with bone grafting, a decrease in bone thickness was seen following the immediate implant placement. Therefore, this technique can be an alternative method to place the implant in the posterior area.     

交变电场作用下骨表面温升的实验研究

骨具有力电性质,这一性质可促进骨组织生长。骨既是生理器官又是介电材料,在交变电场作用下,其表现行为可能有生理作用。为此,本文测量了骨悬臂梁试样在交变电场下的表面温升与顶端挠度。发现在电压70V,频率为10~70kHz的交流电场下,最大表面温升达到2~4℃,最大挠度变化为9.0~78.7μm;在频率10kHz,电压为70~175V的交流电场下,最大表面温升达到4~6℃,最大挠度变化为13.0~114.3μm。同时测量了两种经典介电材料有机玻璃和聚乙烯在交变电场下的温升与顶端挠度,最大温升低于0.5℃,但是挠度与骨试样相当,所以相对高温升是骨特有的性质。将交流电压有效值替换成相同幅值的直流电压时,最大温升也低于0.5℃,基本没有挠度变化,所以相对的高温升反映了骨的交流性质。分析后认为,骨在交变电场作用下的温升由胶原的介电损耗引起。实验数据显示,骨在交变电场下,表面温度变化与加载电压的平方成正比,且在实验加载的10~70kHz频段内,骨的介电常数随频率的变化明显。     

Applications of Vibrational Spectroscopy for Analysis of Connective Tissues

Advances in vibrational spectroscopy have propelled new insights into the molecular composition and structure of biological tissues. In this review, we discuss common modalities and techniques of vibrational spectroscopy, and present key examples to illustrate how they have been applied to enrich the assessment of connective tissues. In particular, we focus on applications of Fourier transform infrared (FTIR), near infrared (NIR) and Raman spectroscopy to assess cartilage and bone properties. We present strengths and limitations of each approach and discuss how the combination of spectrometers with microscopes (hyperspectral imaging) and fiber optic probes have greatly advanced their biomedical applications. We show how these modalities may be used to evaluate virtually any type of sample (ex vivo, in situ or in vivo) and how “spectral fingerprints” can be interpreted to quantify outcomes related to tissue composition and quality. We highlight the unparalleled advantage of vibrational spectroscopy as a label-free and often nondestructive approach to assess properties of the extracellular matrix (ECM) associated with normal, developing, aging, pathological and treated tissues. We believe this review will assist readers not only in better understanding applications of FTIR, NIR and Raman spectroscopy, but also in implementing these approaches for their own research projects.     

丝素纤维/硫酸钙抗感染骨材料的制备及性能

通过控制丝素蛋白自组装过程制备了溶液状态下的丝素纳米纤维(silk fibroin nanofibers,SFFs),与硫酸钙、万古霉素(vancomycin,VCM)复合,制备了VCM/CS/SFFs抗菌骨材料。通过SEM、XRD、紫外分光光度计、万能力学试验机、抑菌圈、MTT等手段分别研究了复合材料的微观形貌与结构、药物释放、力学、抑菌及细胞相容性等性能。结果显示,与水作为固化液相比,随着SFFs溶液(0.017 5~2.1 mg·m L~(-1))的加入,复合材料凝固时间可控,降解率逐渐降低,抗水性增强,韧性提高;同时随丝素纳米纤维含量的增加骨材料抗压强度表现为先增加后减小的趋势,一周内药物释放速率降低;材料同时具有抑菌作用;MTT实验结果显示,加入丝素纳米纤维后与纯的硫酸钙相比MC3T3细胞增殖明显。     

丝素纤维/硫酸钙抗感染骨材料的制备及性能

通过控制丝素蛋白自组装过程制备了溶液状态下的丝素纳米纤维（silk fibroin nanofibers,SFFs）,与硫酸钙、万古霉素（vancomycin,VCM）复合,制备了VCM/CS/SFFs抗菌骨材料。通过SEM、XRD、紫外分光光度计、万能力学试验机、抑菌圈、MTT等手段分别研究了复合材料的微观形貌与结构、药物释放、力学、抑菌及细胞相容性等性能。结果显示,与水作为固化液相比,随着SFFs溶液（0.017 5~2.1 mg·mL^-1）的加入,复合材料凝固时间可控,降解率逐渐降低,抗水性增强,韧性提高;同时随丝素纳米纤维含量的增加骨材料抗压强度表现为先增加后减小的趋势,一周内药物释放速率降低;材料同时具有抑菌作用;MTT实验结果显示,加入丝素纳米纤维后与纯的硫酸钙相比MC3T3细胞增殖明显。