载体化Et(Ind)2ZrCl2催化乙烯-苯乙烯共聚

用均相亚乙基二(1-茚基)二氯化锆(Et(Ind)₂ZrCl₂)催化乙烯和苯乙烯共聚时,所得共聚物中苯乙烯链节含量和聚合活性不能同时满足聚乙烯功能化的要求^[1,2].因此我们用SiO₂对Et(Ind)₂ZrCl₂进行载体化.     

双官能度引发剂引发苯乙烯聚合微观动力学

采用 2 ,5 二甲基 2 ,5 二己酰基过氧化己烷 (DMDEHPH)为引发剂 ,在 5 5～ 80℃下引发苯乙烯聚合 .通过研究影响聚合速率的各种因素 ,得出了聚合速率对单体浓度和引发剂浓度的级数分别为 1 0和 0 5次、聚合活化能为 92 0kJ mol、引发效率为 0 5 5± 0 0 3.温度一定 ,引发效率随引发剂浓度的增加而减小 .求得 6 0和70℃下DMDEHPH向引发剂的链转移常数分别为 0 0 37和 0 0 4 8、向单体的链转移常数分别为 0 5 9× 10 - 4和0 75× 10 - 4.     

苯乙烯/马来酸酐和苯乙烯/甲基丙烯酸二甲氨基乙酯二元体系在聚四氟乙烯多孔膜上的γ辐射接枝

在氮气的氛围下用γ辐照的方法在聚四氟乙烯多孔膜上接枝苯乙烯 马来酸酐、苯乙烯 甲基丙烯酸二甲氨基乙酯二元单体 .并且研究了剂量、剂量率、溶液中单体的浓度和二元单体的摩尔比等条件对接枝率的影响 .探讨了两种单体的竞聚率对接枝率、接枝膜的组成及性能的影响 .结果表明 ,苯乙烯 马来酸酐二元体系对接枝率有协同效应 ,苯乙烯 甲基丙烯酸二甲氨基乙脂二元体系对接枝率表现为加合效应 .制备的二元接枝的聚四氟乙烯多孔膜可以进一步磺化来制备用于质子交换膜燃料电池的质子交换膜 .     

CATALYTIC COPOLYMERIZATION OF STYRENE AND ETHYLENE BY NEUTRAL NICKEL(Ⅱ) COMPLEXES IN EMULSION

Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of th...     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Synthesis and properties of novel liquid crystalline materials with super high birefringence: styrene monomers bearing diacetylenes, naphthyl, and nitrogen-containing groups

Three new liquid crystal asymmetrical styrene monomers bearing diacetylenes, naphthyl, and nitrogen-containing groups were successfully synthesized from 2-(bromoethynyl)-6-(hexyloxy)naphthalene, 4-(4-bromo-2-vinylphenyl)-2-methylbut-3-yn-2-ol, and derivatives of 4-ethynylaniline. The molecular structures of these compounds were confirmed by FTIR, ¹H NMR spectroscopy, elemental analysis, and mass spectrometry. The liquid crystalline properties of monomers were characterized by differential scanning calorimetry and polarized light microscopy. Results indicated that all the compounds exhibited the nematic phase in liquid crystal state and super high optical birefringence of 0.5-0.8. The change of terminal nitrogen-containing group affected the birefringence values in the order of -N(CH₃)₂<-NH₂<-NCS. Moreover, measurements using UV-vis and fluorescence spectroscopy showed their good photoluminescence properties and high quantum efficiency of 0.4-1.0.     

Effect of nanoclay and macroinitiator on the kinetics of atom transfer radical homo- and copolymerization of styrene and methyl methacrylate initiated with CCl3-terminated poly (vinyl acetate) macroinitiator

Effect of nanoclay on the kinetics of atom transfer radical bulk homo- and copolymerization of styrene (St) and methyl methacrylate (MMA) initiated with CCl₃-terminated poly (vinyl acetate) macroinitiator at 90 °C was investigated. CuCl/PMDETA was used as a catalyst system. Results showed that nanoclay significantly enhances the homopolymerization rate of MMA. It was attributed to the activated conjugated CC bond of MMA monomer via interaction between the carbonyl group of MMA monomer and the hydroxyl moiety (AlOH) of nanoclay as well as to the effect of nanoclay on the dynamic equilibrium between the active (macro)radicals and dormant species. Homopolymerization rate of St (a noncoordinative monomer with nanoclay) decreased slightly in the presence of nanoclay. It could be explained by inserting of a portion of macroinitiator into the clay galleries, where no sufficient St monomer exists due to the low compatibility or interaction of St monomer with nanoclay to react with the macroinitiator. Controlled/living characteristic of all the reactions were confirmed by GPC results. More reliable reactivity ratios of the St and MMA in the presence of nanoclay were calculated by using the cumulative average copolymer composition at the moderate to high conversion to be r_St = 0.290 ± 0.082, r_MMA = 0.443 ± 0.093 (extended Kelen-Tudos method) and r_St = 0.293 ± 0.071, r_MMA = 0.447 ± 0.080 (Mao-Huglin method). Results indicated that the rate of incorporation of MMA comonomer into the copolymer increases in the presence of nanoclay, verifying the existence of interaction between the carbonyl group of MMA comonomer and the hydroxyl moiety of nanoclay. It was found that in the presence of nanoclay, tendency of the random copolymerization of St and MMA toward an alternating copolymerization increases.     

Synthesis and styrene polymerization properties of dinuclear half-titanocene complexes with xylene linkage

The new dinuclear half-sandwich complexes of titanium with xylene bridge, [Ti(η⁵-cyclopentadienyl)Cl₂L]₂[CH₂-C₆H₄-CH₂] (L = Cl (3), L = O-2,6-iPr₂C₆H₃ (4), L = N(SiMe₃)(2,6-Me₂C₆H₃) (5)), have been synthesized. The complexes 4 and 5 have been prepared by the reaction of the complex 3 with the corresponding lithium salts of aryloxy and anilide. Structure of these complexes has been characterized by ¹H and ¹³C NMR. The change of substituent from chloride, 3, to anilide, 5, at titanium resulted in chemical shift change of cyclopentadienyl protons from 6.92 and 6.79 to 6.13 and 5.95 ppm probably due to the positive electron density delivery from the anilide group. It was found that all three half-titanocenes were effective catalyst for the generation of SPS (syndiotactic polystyrene). Xylene bridged dinuclear catalyst (4) with aryloxy substituent exhibited very high activity (458 kg of SPS/(mol of [Ti])h), at 40 °C, whereas the analogous hexamethylene bridged dinuclear half-titanocene catalyst (7) showed a lower activity (80.7 kg of SPS/(mol of [Ti])h) under the same conditions. While the catalyst 3 was the most active catalyst among three complexes less than 40 °C the catalyst 5 exhibited the highest activity at 70 °C. Xylene linkage was suggested to be too stiff to permit any kind of intramolecular interaction between two active centers. Lack of steric disturbance due to the rigidity of the xylene bridge might give rise to the similar properties of dinuclear metallocene to the corresponding mononuclear metallocene to result in not only the facile coordination of monomer at the active center to lead high activity but also the easier β-H elimination comparing to the dinuclear catalysts with the flexible bridge to result in the formation of lower molecular weight polymer.     

液体顶空-气相色谱法测定食品接触苯乙烯聚合物中单体及溶剂残留

提出了液体顶空-气相色谱法测定食品接触苯乙烯聚合物中残留单体及溶剂的方法。采用N,N-二甲基乙酰胺溶解聚合物,使其中残留单体及溶剂完全释放,并在优化的工作条件下,以基体匹配校正法绘制工作曲线,有效消除基质效应。7种分析物检出限(3S/N)在0.2～4.1mg.kg-1之间。测得方法的回收率在93.2%～103.2%之间,测定值的相对标准偏差(n=6)在1.1%～5.6%之间。     

GMA和共单体对聚乙烯木塑复合材料的直接反应增容

通过甲基丙烯酸缩水甘油酯(GMA)、聚乙烯(PE)、木粉和其它助剂的熔融挤出,实现了GMA及GMA与共单体对PE和木粉的直接反应增容.通过扫描电镜(SEM)观测了PE基木塑复合材料(WPC)的冲击断面形貌.测试了WPC经抽提后所得木粉的傅立叶变换红外光谱(FTIR)和WPC的力学性能及热变形温度(HDT).研究了共单体苯乙烯(St)和抑交联剂亚磷酸三苯酯(TPP)对反应增容的影响.结果显示,经GMA和引发剂反应增容后,有部分PE分子键合到了木粉粒子上,从而增强了木塑两相的结合力;St的加入有利于提高GMA的接枝率,导致更多PE分子键合到了木粉粒子上,而TPP的加入则使GMA的接枝率有所下降.经GMA和引发剂直接反应增容后,WPC的力学性能和HDT均明显改善;St的加入有助于抑制PE的交联,但并未造成WPC力学性能和HDT的明显劣化;同时加入St和TPP后,WPC的HDT有所下降,而断裂伸长率和冲击强度则明显提高.