Filler effects on the thermomechanical response of stretched rubbers

This paper deals with the calorimetric analysis of deformation processes in filled styrene-butadiene rubbers. More especially, the study focuses on the effects of the addition of carbon black fillers on the calorimetric response of “demullinized” SBR. Temperature variations are measured by infrared thermography during cyclic uniaxial tensile tests at ambient temperature. Heat sources¹ produced or absorbed by the material due to deformation processes are deduced from temperature fields by using the heat diffusion equation. First, the results show that no mechanical (intrinsic) dissipation is detected for weakly filled SBR, meaning that the heat produced and absorbed over one mechanical cycle is the same whatever the stretch ratio reached. Second, the mechanical dissipation in highly filled SBR is significant. The quantitative analysis carried out highlights the fact that it increases quasi-linearly with the stretch ratio. Finally, a simplified framework is proposed to discuss the identification of the heat sources, in particular the mechanical dissipation.     

苯乙烯和N-乙烯基吡咯烷酮共聚物/Ag复合微球的制备及性能研究

首先用无皂乳液聚合法制备了单分散聚苯乙烯(PSt)乳液,以此为种子乳液,使用N,N-亚甲基双丙烯酰胺(MBA)为交联剂,过硫酸钾(KPS)为引发剂,进行苯乙烯和N-乙烯基吡咯烷酮(NVP)共聚合制备了以PSt为核、St和NVP共聚物为壳的具有核-壳结构的聚合物微球(P(St-NVP)).以此微球为模板通过化学沉积法得到了粒径分布均匀、单分散的P(St-NVP)/Ag复合微球.傅里叶红外光谱、X-射线衍射、扫描电镜、透射电镜、激光粒度仪和紫外-可见光谱对复合微球的结构、形貌、物相及催化性能进行了表征.结果表明,P(St-NVP)/Ag复合微球具有规则的球形结构,粒径在400～700 nm之间,随交联剂浓度或种子乳液浓度的增加,复合微球粒径减小.粒径在十几个纳米左右的银粒子均匀分布在微球表面和内部.载银复合微球在NaBH4还原4-硝基苯酚为4-氨基苯酚的模型反应中表现出较高的催化活性.     

Synthesis and thermal properties of a new styryl-functionalized pentafulvene glassy carbon precursor

The first preparation of a styryl-functionalized aryl pentafulvene 4 was carried out. In the crystal structure of 4, the packing of fulvene molecules results in the shortest intermolecular contacts between aligned vinyl groups. Thermal reactivity studies of 4 (DSC and TGA, under N₂) revealed a small difference between the melting point (120 °C) and the T_onset for cross-linking (125 °C), and provided strong evidence for the production of a network material (net4) due to reactivity of the attached styryl group. Pyrolysis of net4 under N₂ gave a glassy carbon product in low yield as revealed by powder X-ray and TGA analyses (carbon yield (TGA) of 38% (900 °C)).     

采用反应挤出三次加料法合成苯乙烯/异戊二烯/苯乙烯

以同向啮合双螺杆挤出机为反应器,采用苯乙烯和异戊二烯为聚合单体,以正丁基锂为引发剂,采用三次加料法合成苯乙烯/异戊二烯/苯乙烯(SIS)三嵌段热塑性弹性体.氢核磁共振(1H NMR)谱分析结果表明,共聚物中聚异戊二烯嵌段以1,4-结构为主.采用四氧化锇催化双氧水氧化降解聚合物分子链,利用凝胶渗透色谱对氧化降解后的聚苯乙烯碎片进行分析,证明共聚物分子为(聚苯乙烯-聚异戊二烯-聚苯乙烯)(PS-PI-PS)三嵌段结构.动态力学分析(DMA)及透射电子显微镜(TEM)分析结果表明,SIS具有两相分离结构.拉伸试验结果表明,共聚物拉伸强度与苯乙烯含量有关.     

苯乙烯与4-氨基苯酚的氢氨甲基化反应研究北大核心CSCD

氢氨甲基化反应(HAM)是由简单烯烃、胺和合成气一锅法合成有价值胺的方法,具有较高的原子经济效率.然而,4-氨基苯酚作为一种特殊的反应底物,因其同时具有羟基和胺基官能团,在羰基化反应过程中能够选择性地在不同位点发生反应获得不同的产物.因此,我们系统研究了4-氨基苯酚与烯烃的HAM,通过筛选反应参数,确定了最优反应条件,并通过调控添加剂种类,选择性地在4-氨基苯酚的不同活性位点发生反应.结果表明,以甲醇为溶剂,三(3-甲氧基苯基)膦为配体,RhCl(PPh_(3))_(3)为催化剂前驱体,合成气压力4 MPa(H_(2)∶CO=3∶1),反应温度100℃,反应时间20 h时,该催化体系具有最高的反应活性.当以CH3COOH作为添加剂时,选择性的4-氨基苯酚的胺基官能团发生氢氨甲基化反应得到产物4-[(2-苯丙基)氨基]苯酚,收率为82%;当以DBU作为添加剂时,得到苯乙酮产物,收率为92%.最后,提出了该反应可能的机理,为4-氨基苯酚的选择性反应提供理论依据.     

Recent developments in oxidative biocatalytic cascades

Biocatalytic cascades that involve enzymatic oxidation as one or more key steps are powerful tools to access valuable chemicals with various functionalizations starting from simple substrates, without the isolation of intermediates. This review discusses the recent advances in oxidative cascades, with perspectives given on the current limitations and future developments. The strategies employed to achieve efficient supply of redox cofactors are also highlighted. The examples include cascades that begin with alkene epoxidation, alkane hydroxylation, alcohol oxidation or amine oxidation. These oxidative steps are followed by a variety of enzyme-catalyzed functionalizations, producing a diverse range of high-value products.     

Vulcanization kinetics of graphene/styrene butadiene rubber nanocomposites

This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.     

Controllably Growing Topologies in One-shot RAFT Polymerization via Macro-latent Monomer Strategy

The controlled and efficient synthesis of polymers with tailored topologies is challenging but important for exploring structure/property research. Herein, we proposed a concept of macro-latent monomer to achieve the controlled growth of polymer topologies.The macro-latent monomer was installed by a dynamic furan/maleimide covalent bond at the chain terminal. One-shot reversible additionfragmentation chain transfer(RAFT) polymerization of styrene and the macro-latent monomer created controlled growth of polymer topologies.Low temperature such as 40 ℃ could not activate the macro-latent monomer and thus the polymerization created the homo-polystyrene. By contrast, high temperature of ～110 ℃ activated the macro-latent monomer, and a maleimide-terminated macro-monomer was released via the retro-Diels Alder reaction. This macro-monomer immediately joined the cross polymerization with styrene and thus produced the side chains. By delicately manipulating the polymerization temperature, the predetermined placement of the macro-latent monomer-derived polymeric sidechains created controllably growing topologies, including star-, π-shaped, and density-variable grafting copolymers. This work paved a new way for creating on-demand topologies and would greatly enrich the topology synthesis.     

硅氢加成反应高选择性合成甲基苯乙基二氯硅烷

研究了硅胶负载聚乙二醇铂催化苯乙烯与甲基二氯氢硅的硅氢加成反应,β-加成产物甲基苯乙基二氯硅烷的选择性为100%,10℃下反应8h苯乙烯转化率为96.0%.反应存在一个诱导期,温度等反应参数对诱导期有重要影响,40℃下反应的诱导期不到1h,并探讨催化剂的催化机理和目标产物高选择性的原因.     

水分散体系中苯乙烯和甲基丙烯酸甲酯梯度共聚物的合成与表征

以2-溴代异丁酸乙酯(EBiB)为引发剂,CuBr/CuBr₂/1,10-邻二氮菲(phen)为复合催化剂,十二烷基磺酸钠(SLS)为乳化剂,考察了水分散体系中苯乙烯(St)和甲基丙烯酸甲酯(MMA)的原子转移自由基共聚合的可控性和相对反应活性.在此基础上,通过反应进料法在水分散体系中进行了St和MMA的梯度共聚合,反应表现出“活性”聚合的特征,即所得共聚物的数均分子量随着单体转化率的增加而增大,分子量分布较窄(M_w/M_n<1.50).用¹HNMR跟踪分析了聚合反应过程中共聚物微观组成的变化规律,结果表明,共聚物链中MMA链节的累积含量和瞬时含量都随着共聚物相对链长的增加而增加,即随着聚合物相对链长的增加共聚物的微观组成从St链节占主导地位逐渐变化为以MMA链节占主导地位,表明确实形成了St和MMA的梯度或渐变共聚物.