About the cure kinetics in natural rubber/styrene Butadiene rubber blends at 433 K

Vulcanized blends of elastomers are employed in several goods mainly to improve physical properties and reduce costs. One of the most used blends of this kind is that composed by natural rubber (NR) and styrene butadiene rubber (SBR). The cure kinetic of these blends depends mainly on the compound formulation and the cure temperature and time. The preparation method of the blends can influence the mechanical properties of the vulcanized compounds.     

Separation and Gas Chromatographic Determination of Free Styrene in Unsaturated Polyester Resins

Abstract

A rapid and efficient method for the separation and determination of free styrene in unsaturated polyester resin samples by gas chromatography was developed. A 10 cm pre-column connected to 1.2 m analytical column, both packed with 20 % carbowax 20M was used at 100°C with isobutylbenzene as an internal standard. Analysis time was two minutes with an accuracy of 0.3 %.     

O_2/EAHQ/[C_5H_5NC_(16)H_(33)]_3PW_4O_(16)体系对苯乙烯选择性催化环氧化

考察了 O2 / 2 -乙基蒽氢醌 (EAHQ) / [C5 H5 NC1 6 H33]3PW4O1 6 催化体系对苯乙烯选择性环氧化中的溶剂效应和催化剂稳定性等 .发现在邻苯二甲酸二甲酯和磷酸三丁酯的混合溶剂中 ,由于邻苯二甲酸二甲酯的配位作用较强 ,对催化剂的活性有抑制作用 ;若以甲苯取代部分邻苯二甲酸二甲酯 ,催化剂有较好的活性、较高的选择性及很好的稳定性 .当催化剂的摩尔用量从 2 -乙基蒽氢醌的 1/ 10 0减少到 1/ 80 0时 ,反应结果基本保持不变 .该体系对环氧苯乙烷的选择性达 92 % ,催化剂的转化数达 5 0 0     

Synthesis of Syndiotactic Polystyrene/Atactic Polypropene Block Copolymer in the presnece of Half-sandwich Titanocene Catalysts

Some highly active η5-pentamethylcyclopentadienyltribenzyloxy titanium complexes [Cp*Ti(Obz)3] activated by modified methylaluminoxane (mMAO) were prepared and used as the catalyst for styrene syndiospecific polymerization and propene atactic polymerization. Styrene could be copolymerized with propene when the propene was prepolymerized for a period, to which styrene and tri-isobutylaluminum (TIBA) were then added. The titled block copolymer together with the related homopolymers was obtained. The copolymerization porducts can be divided into the homopolymers and the copolymer by successive solvent extraction with boiling butanone, heptane and tetrahydrofuran (THF), and each fraction was characterized by 13C NMR, DSC and WAXD. It was found that aPS and aPP were soluble in boiling butanone and heptane respectively. The block copolymer (sPS-b-aPP) composed of syndiotactic polystyrene segment was soluble in boiling THF and the residue was chiefly sPS.     

Copolymerization of styrene and reactive surfactants in a microemulsion: control of copolymer composition by addition of nonreactive surfactant

The γ-ray-induced copolymerization of styrene and the surfactant monomer (surfmer) (11-acryloyloxy)undecyltrimethylammonium bromide, 1, – with and without the presence of the nonreactive surfactant N-dodecyltrimethyammonium bromide, 2, – was studied in a single-phase (1Φ) oil-in-water microemulsion. Upon exchange of 50 weight percent of 1 against 2 the 1Φ region could be increased to higher styrene content. Upon γ-ray irradiation a copolymer is formed: this copolymer exhibits a larger styrene-to-surfmer ratio than the original monomer mixture. This allowed the styrene-to-surfmer molar ratio in the resulting polymer to be varied from 0:1 to 4.3:1. The larger styrene-to-surfmer ratio originates from the simultaneous formation of homopolymer P-1, which is in accordance with the Candau–Leong–Fitch model of polymerization. Further information on particle size and material properties of the copolymers, which is not accessible by other preparation methods, is also given. Received: 30 July 1999 /Accepted: 24 November 1999     

新型五甲基茂基三苄氧基钛/甲基铝氧烷催化剂合成苯乙烯-乙烯共聚物及其表征

以五甲基茂基三苄氧基钛［Ｃｐ＊ Ｔｉ（ＯＢｚ）３］ 和甲基铝氧烷（ ＭＡＯ） 组成的催化体用本体法合成出苯乙烯 乙烯共聚物Ｐｏｌｙ（Ｓ ｃｏ Ｅ） ．考察了共聚温度,共聚时间,Ａｌ／Ｔｉ 摩尔比,主催化剂浓度［Ｔｉ］ 等条件对共聚反应的影响．共聚产物经沸丁酮,沸四氢呋喃（ＴＨＦ） 连续抽提分离,发现共聚物主要存在于ＴＨＦ 可溶级分中．可溶级分经ＤＳＣ,１３Ｃ ＮＭＲ,ＷＡＸＤ,ＤＭＡ 等手段分析,证明苯乙烯 乙烯共聚物为具有单一玻璃化转变温度（ Ｔｇ） 无熔融温度的无规共聚物,显示弹性体的粘弹性行为．     

(μ3-S)Fe2CoCu(PPh3)2(CO)8催化苯乙烯环丙烷化反应研究

以异核金属原子簇合物为催化剂的配位催化反应, 已在均相催化反应中得到应用. 簇合物中不同金属间的协同作用使其在催化领域展现出广阔的应用前景[1]. 然而,催化反应中簇合物是否以完整的骨架起催化作用,一直是人们关注的焦点. 在金属原子簇作催化剂前体的均相催化反应中,迄今只在少数的例子中有确凿的证据表明原子簇整体分子起催化作用[2]. 一般认为,在配位饱和的金属簇合物的催化反应中,簇合物稳定性越好,催化活性越差;而活性好的催化剂前体,簇合物骨架常解体.     

中孔分子筛MSU及其杂原子衍生物的合成、表征和催化性能研究

以十八烷基聚氧乙烯基醚为模板剂,在ＳiＯ２的等电点（ＰＨ值为２）下,成功地合成了 具有ＭＳＵ结构的中孔ＳiＯ２分子筛及其Ｔｉ、Ｚｒ和Ｖ取代衍生物。用ＸＲＤ、Ｘ２吸 附／脱附、ＤＲＵＶ－Ｖｉｓ和元素分析等手段,对它们的孔道及骨架结构进行了全面表征。催化性能评价结果表明,在乙酸介质中,Ｔｉ、Ｚｒ和Ｖ等过渡金属原子取代的分子筛样品可以催化苯乙烯氧化为苯甲醛的反应,且活笥和选择性较高。     

烷基镁对杯芳烃钕催化苯乙烯聚合反应的影响

用助催化剂二正丁基镁和催化剂P204Nd及第三组分六甲基磷酰胺(HMPA)组成的催化体系是苯乙烯聚合的优良催化体系,能以很高的转化率得到高分子量的聚苯乙烯[1],用杯芳烃钕配合物代替P204Nd作为催化剂也能得到很好结果[2].为了提高其助催化作用,丁基镁是用镁粉和氯代正丁烷在弱极性溶剂甲苯中制备的.丁基镁在甲苯中的溶解度比较小,要加入少量的三乙基铝,以增加其在甲苯中的溶解度.镁粉和氯代正丁烷在甲苯中的反应没有在四氢呋喃中容易进行,每次制备出的丁基镁的浓度和Mg/Al的物质的量比都有较大的差别,对苯乙烯的聚合产生明显影响.为此我们…     

苯乙烯/N-苯基马来酰亚胺共聚物分子量测定和模型

从内聚能的角度建立了含共聚组成、序列不均匀性的共聚物分子量及分布理论,导出其计算式.将凝胶渗透色谱(GPC)与紫外吸收光谱(UV)和示差折光仪(DR)串接,测定苯乙烯(St)/N-苯基马来酰亚胺(PMI)共聚物的分子量.根据St/PMI共聚合原理,对St-PMI共聚物的分子量进行模型化,该模型能较好地预测引发剂、单体配比、转化率对共聚物分子量的影响.