Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

Cross-metathesis of vinyl aromatic heterocycles with 1-octene in the presence of a Schrock catalyst

Metathesis of 2-vinyl aromatic heterocycles such as furan, thiophene, pyrrole and pyridine in the presence of a molybdenum-based Schrock catalyst has been investigated from a synthetic point of view. The self-metathesis of 2-vinyl aromatic heterocycles was not successful. However, in cross-metathesis of thiophene, furan and styrene with 1-octene, the cross-metathesis product, heterodimer, was readily obtained selectively, together with only small amounts of the two corresponding self-metathesis products. The origin of the surprisingly high selectivity of heterodimer formation was elucidated through metallacyclobutane intermediate mechanism, observations of carbenes by in situ ¹H NMR, and reaction products.     

AN/St悬浮共聚体系中AN在水/油两相间分配及其对共聚物组成的影响

研究了丙烯腈/苯乙烯(AN/St)悬浮共聚体系中AN在水/油两相间的分配及其对AN/St共聚物组成的影响.结果表明,AN分配于水/油两相间,使油相AN的含量低于相同单体配料比的本体聚合,导致生成的AN/St共聚物组成偏离本体共聚.为了准确预测进而控制AN/St悬浮共聚物的组成,提出了在考虑AN相分配的基础上计算AN/St悬浮共聚物组成的模型.计算结果与实验值一致,计算中用到的油相实际竞聚率与本体聚合相同,但该悬浮聚合的表观竞聚率随水/油比的变化而发生较大改变.     

(Pd-Cu)/C上苯乙烯氧化羰化合成肉桂酸甲酯的研究

在常压130℃下研究了Pd-Cu催化剂组成,反应温度,少量添加剂和原料气中O_2含量等对苯乙烯氧化羰化合成肉桂酸甲酯的影响,并对催化剂的形、相态进行表征.发现O_2有双重作用;O_2不仅使Pd-Cu之间的价态循环,而且能抑制反应过程中饱和苯丙酸甲酯的生成.指出催化反应中Pd-Cu之间的催化协同效应促进了产物的生成.初步讨论了本反应的机理.     

氯化聚乙烯对甲基丙烯酸甲酯／苯乙烯共聚动力学的影响

将甲基丙烯酸甲酯（ＭＭＡ）／苯乙烯（Ｓ）在氯化聚乙烯（ＣＰＥ）存在下进行悬浮溶胀接枝共聚，考察了ＣＰＥ对ＭＭＡ／Ｓ共聚动力学行为的影响．ＣＰＥ提高了聚合体系的粘度，使自动加速提前，扩散因素增加，对共聚有阻滞作用．ＣＰＥ是链转移剂，使ＭＭＡ／Ｓ共聚物分子量降低．ＣＰＥ对ＭＭＡ的吸附渗透优于对Ｓ的吸附，造成接技部分与非接技部分组成的差异．ＣＰＥ含量、溶胀时间、转化率、硫酸用量对共聚组成均有影响。     

KPS—CuSO4—Na2SO3参与的无皂液聚合

研究了MMA-St在氧化还原引发剂KPS-CuSO_4-Na_2SO_3存在下的快速无皂乳液聚合.当[MMA]=0.51mol/L、[St]=0.49 mol/L、70℃对,在[KPS]=2.77×10~(-3)mol/L、[CuSO_4]=1.50×10~(-5)mol/L、[Na_2SO_3]=2.77×10~(-3) mol/L条件下反应100min,转化率大于90％;讨论了胶乳的分子量及其分布;求出了聚合反应活化能E_a=81.6 kJ/mol和聚合反应速率常数k_p=321.9 L/mol·s.     

Photocatalysed eosin Y mediated C(sp3)-H alkylation of amine substrates via direct HAT

A visible light promoted, photoredox catalysed, green one-pot approach for the alkylation of amine substrates with sp² carbon has been developed. This eosin Y based organic transformations, can behave as an effective direct hydrogen-atom transfer catalyst for coupling reaction. The proposed strategy includes simple procedure which can make adduct product with sp² carbon. This eosin Y based photocatalytic hydrogen-atom transfer strategy may hold great potential for diverse functionalization of a wide range of native CH bonds in an economical and sustainable manner.     

Quantitative aspects of gradient HPLC of copolymers from styrene and ethyl methacrylate

Summary Prerequisite of quantitative evaluation in chromatography is equivalence of sample composition and detector signal. This includes complete retention and proper elution of all sample constituents. In polymer HPLC, complete retention requires a poor starting eluent, a sufficiently active column, and a low ratio of injection volume to column volume. On small pore columns, insufficient retention caused the polymer to elute either in the interstitial volume (sample exclusion), together with the sample solvent, or immediately after the solvent plug.Stat-copoly(styrene/ethyl methacrylate) samples are more difficultly retained thanstat-copoly(styrene/acrylonitrile) specimes. With the former copolymer it could be shown that incomplete retention did not cause sample demixing. In order to gain complete retention, non-exclusion HPLC of polymers should be performed with columns whose solvent volume is at least 50 times as large as the injection volume. This consequence is of practical importance in chromatographic cross-fractionation where rather large volumes of SEC eluate are injected into the apparatus for gradient HPLC.     

稀土配位催化马来酸酐-苯乙烯-N-苯基马来酰亚胺三元共聚合

采用稀土配位催化剂研究了马来酸酐、苯乙烯和N 苯基马来酰亚胺的三元共聚合反应 .考察了Al La物质的量的比、不同稀土元素、催化剂浓度、聚合反应时间、单体配比等因素对共聚合反应的影响 .利用核磁、红外、热分析等方法对共聚物进行了初步的表征     

超高分子量聚苯乙烯的合成和聚合反应动力学

杯芳烃钕与Mg(n Bu) 2 、HMPA所组成的三元络合催化剂用于苯乙烯配位聚合能以高收率制得超高分子量聚苯乙烯 .以甲苯为溶剂 ,在一定条件下制成三元配位催化剂 ,当 [Nd]=8× 10 - 4mol L ,[St]=4 .0mol L ,Mg Nd =2 0 .0 (摩尔比 ) ,HMPA Mg =1.0 (摩尔比 ) ,5 0℃聚合 4 5min ,聚合转化率可达到 80 %左右 .所得聚苯乙烯的重均分子量高达 2 10× 10 4 ,分子量分布指数为 1.6 1.间规聚苯乙烯含量为 81% .动力学研究表明 ,聚合反应速率与单体和主催化剂 杯 [6 ]芳烃钕的浓度分别呈 1次方关系 ,聚合反应的表观活化能为 4 1.7kJ mol