Evaluation of SARs for the prediction of skin irritation/corrosion potential–structural inclusion rules in the BfR decision support system†

The German Federal Institute for Risk Assessment (BfR) has developed a Decision Support System (DSS) to assess certain hazardous properties of pure chemicals, including skin and eye irritation/corrosion. The BfR–DSS is a rule-based system that could be used for the regulatory classification of chemicals in the European Union. The system is based on the combined use of two predictive approaches: exclusion rules based on physicochemical cut-off values to identify chemicals that do not exhibit a certain hazard (e.g., skin irritation/corrosion), and inclusion rules based on structural alerts to identify chemicals that do show a particular toxic potential. The aim of the present study was to evaluate the structural inclusion rules implemented in the BfR–DSS for the prediction of skin irritation and corrosion. The following assessments were performed: (a) a confirmation of the structural rules by rederiving them from the original training set (1358 substances), and (b) an external validation by using a test set of 200 chemicals not used in the derivation of the rules. It was found as a result that the test data set did not match the training set relative to the inclusion of structural alerts associated with skin irritation/corrosion, albeit some skin irritants were in the test set.     

无机固体材料中的忆阻效应

缺陷调控是固体化学中的基本问题,也是决定材料性能的核心要素。基于缺陷调控的忆阻效应将给未来电子信息领域带来全新的变革。本文综述了无机固体材料中忆阻效应的研究进展,主要总结了忆阻效应的产生机制和忆阻材料的类型,结合原子级p-n结的相关工作,提出深入明确电场下缺陷迁移机制将是从无机固体化学角度研究忆阻效应的重要方向。     

钙钛矿型氧化物负载纳米金属催化剂结构的动态调变及其催化氧化CO反应性能

研究了钛酸钡和钛酸钙担载的Ag和Pt纳米催化剂的表面结构随氧化-还原处理过程的动态变化及其对CO完全氧化反应性能的影响.发现氧化物担载的Ag催化剂在氧化处理后其催化活性较还原处理的高; X射线衍射(XRD)和X射线光电子能谱(XPS)表征结果表明,氧化处理能够提高载体表面Ag颗粒的分散度,而还原处理导致Ag颗粒的聚集,从而降低了催化氧化CO反应的活性.氧化-还原处理改变了担载Ag纳米粒子的尺寸并影响其CO氧化反应活性.与此相反,氧化物担载的Pt催化剂在还原处理后所表现出的CO氧化反应活性较氧化处理的高; 对比研究发现,氧化和还原处理后Pt纳米粒子的尺寸基本相同,但是氧化处理的样品中Pt表面物种以氧化态为主,而还原处理后Pt表面物种主要为金属态.Pt纳米粒子表面化学状态随氧化-还原处理的调变是导致表面催化活性差异的主要原因.     

Lipase mediated separation of triterpene structural isomers, α- and β-amyrin

Pentacyclic triterpenoids α- and β-amyrin possess a wide range of biological and pharmacological activities. High structural similarity between these two structural isomers makes their chromatographic separation an ineffective and tedious choice. In this study, Candida rugosa lipase catalyzed separation protocol for the isolation of individual isomers has been developed. In the presence of vinyl acetate as the acyl donor, Candida rugosa lipase carried out acetylation of β-amyrin more efficiently as compared to α-amyrin leading to a kinetic separation. The conditions of transesterification reaction were optimized systematically, which was utilized to separate α- and β-amyrin from a mixture obtained from the latex of Plumeria obtusa.     

Further revisions on the diterpenoid alkaloids reported in a JNP paper (2012, 75, 1145–1159)

We have corrected (Tetrahedron2013, 69, 5859–5866) the structures of diterpenoid alkaloids reported in the Journal of Natural Products2012, 75, 1145–1159. Our follow-up experiments compel us to present further revisions and clarifications on the diterpenoid alkaloids:     

纳米孔缺陷导致单层黑磷电荷局域极大抑制非辐射电子-空穴复合的时域模拟

通常认为缺陷加速黑磷的非辐射电子-空穴复合,阻碍器件性能的持续提高。实验打破了这一认识。采用含时密度泛函理论结合非绝热分子动力学,我们发现P-P伸缩振动驱动非辐射电子-空穴复合,使纳米孔修饰的单层黑磷的激发态寿命比完美体系延长了约5.5倍。这主要归因于三个因素。一,纳米孔结构不但没有在禁带中引入深能级缺陷,而且由于价带顶下移使带隙增加了0.22 eV。二,除了带隙增加,纳米孔减小了电子和空穴波函数重叠,并抑制了原子核热运动,从而使非绝热耦合降低至完美体系的约1/2。三,退相干时间比完美体系延长了1.5倍。前两个因素战胜了第三个因素,使纳米孔结构激发态寿命延长至2.74 ns,而其在完美体系中约为480 ps。我们的研究表明可以制造合理数量和形貌的缺陷,如纳米孔,降低黑磷非辐射电子-空穴复合,提高光电器件效率。这一研究对于理解和调控黑磷和其它二维材料的激发态性质有重要意义。     

一体化电极电催化二氧化碳还原研究进展

电催化二氧化碳还原反应(E-CO₂RR)可在温和条件下将CO₂转化成高附加值燃料或化学品,近年来受到广泛关注,其在实际反应中涉及到气体扩散和多电子转移等复杂过程,构筑高效、稳定的催化电极是其发展的核心之一。然而,传统涂敷电极制备时,需要将催化剂与粘结剂混合涂覆于集流体表面,此过程会造成活性位点包埋和传质过程受限,致使催化剂活性位利用率下降,同时在反应过程中电极表面容易粉化,造成稳定性下降,难以重复利用。因此,如何调控电极反应界面,提升催化剂活性位的利用率仍面临挑战。将催化剂原位生长于集流体上得到的一体化电极可直接应用于电催化反应,不仅有利于提升活性位利用率以及电荷传输能力,还能有效调控三相界面处的微观反应环境(如pH、反应物及反应中间体的浓度等),从而实现电催化性能强化。本文综述了一体化电极用于E-CO₂RR的最新进展,分析了结构和表界面调控对E-CO₂RR性能的影响规律,并对该领域仍然存在的挑战和未来一体化E-CO₂RR电极的发展进行了评述与展望。     

基于雨课堂和BOPPPS改进模型的教学设计——以大学化学课程为例

在高等学校专业课程教学中融入思政教育教学的理念,是以"立德树人"为教育根本任务的基本要求。结合结构化学课程特点和教学内容,以"培养学生的哲学观和科学观、培养学生民族自豪感和自信心"的目标为切入点,提出结构化学教学中思政元素的融入策略,发挥结构化学课程的"育德功能",实现知识传授和价值引领的有机统一。     

Ternary zero-dimensional hybrid metal halides with dual emission

Bulk assemblies of zero-dimensional (0D) metal halides with ‘host-guest’ system provide a promising platform for rationally structural tunability and photoluminescence modulation. In this work, we first report a series of ternary 0D metal halides, (bmpy)₉[Pb₃Cl₁₁](MnCl₄)_2-2x(SbCl₅)_2x (bmpy⁺ = 1-buty-1-methylpyrrolidinium⁺, C₉NH₂₀⁺), where the organic cation bmpy⁺ cocrystallizes with [Pb₃Cl₁₁]^5- trimer clusters, [MnCl₄]^2? tetrahedra, and [SbCl₅]^2? pyramids. The emission color of (bmpy)₉[Pb₃Cl₁₁](MnCl₄)_2-2x(SbCl₅)_2x can be easily tuned from green to warm white and finally to orange-red by controlling the excitation wavelength or the [SbCl₅]^2?/[MnCl₄]^2? molar ratio, promising its potential for application in multicolor light-emitting devices or even in encrypting multilevel optical codes. This work presents a novel structural modulation strategy to fabricate superior ordered single-crystalline multicomponent materials with multifunctionalities of 0D luminescent metal halides.     

Surface domain potential difference-mediated efficient charge separation on a defective ZnIn2S4 microsphere photocatalyst

Low-efficiency charge separation in metal sulfides is a major obstacle to realizing high photocatalytic performance. Herein, we propose the concept of a similar surface domain potential difference between adjacent microdomains with and without surface S vacancies on ZnIn₂S₄ to mediate charge separation. Defective ZnIn₂S₄ microspheres (DZISNPs) are prepared through a solvothermal method combined with a low-temperature hydrogenation surface engineering strategy. The as-prepared DZISNPs with a narrowed bandgap of 2.38 eV possess a large specific surface area of 178.5 m² g^?1, a pore size of 6.89 nm, and a pore volume of 0.36 cm³ g^?1, which further improves the visible light absorption. The resultant DZISNPs exhibit excellent visible light activity (2.15 mmol h^?1 g^?1), which is ～two-fold higher than that of the original DZISNP. The experimental results and DFT calculations reveal that the enhanced property can be a result of the surface S vacancy-induced surface domain potential difference, promoting the spatial separation of electrons and holes. Furthermore, the long-term stability of the DZISNPs indicates that the formation of surface S vacancies can inhibit the photocorrosion of ZnIn₂S₄. This strategy provides new insights for fabricating highly efficient and stable sulfide photocatalysts.